ANYKIT AN100 Articulating Borescope 2MP Industrial Instruction Manual
- May 15, 2024
- ANYKIT
Table of Contents
ANYKIT AN100 Articulating Borescope 2MP Industrial
INTRODUCTION
The AN100 articulating borescope is equipped with a controllable probe tip.The probe tip can be pointed different directions by turning a wheel. With the two-way 180-degree steering function, the borescope provides vivid, clear video and pictures. This is a huge advantage for a technicians or engineers to inspect tight and hard-to-reach areas inside a complex product, such as automotive, turbine engine, or HVAC unit. Meet your diverse inspection needs with advanced extended accessories and a real-time temperature display.
Warning:
- Read this manual carefully before using this product to avoid damage caused by improper use.
- Disassembly of this product is forbidden, and the compay is not responsible for any loss caused by unauthorized disassembly of this product.
- This product is an industrial endoscope inspection camera, which is not suitable for medical purposes.
- The temperature of the probe should not exceed 176° F (80°C).
Notice
- Clean the product after use and avoid direct exposure to oil or corrosive liquid.
- Make sure the dial returns to the neutral position before pulling out the coiled tubing. Do not turn the dial aggressively.
- Do not twist or pull on the articulating probe.
- Please handle gently, do not bend the camera probe excessively.
- Charge the device at least once every 3 months’ even if it is not used for a long tirne to prevent damage to the battery.
- Please use a 5V adapter or mobile power to connect a Type-C USB cable for charging. The charging voltage and current are 5V / 1 A. If the voltage is too high, the machine may be damaged.
*Please note that this machine does not support fast charging.
Control Layout
Power On/Off:
Long press the power button “ ” for 2 seconds to power on, the working
indicator & the display screen will turn on. Long press for 2 seconds to power
off .
Brightness Adjustment:
Short press “ ” to adjust the brightness from O to 3 levels.
switch the view of Camera (Only for Dual)
Hold the “ ” to switch the view of the Front Camera/Side Camera.
210° Adjustment Lens Field Of View:
The lens field of view can be adjusted 210° by rotating the articulation
wheel.
Photo/Video:
-
Press “ ” to switch to “take photo” mode, and press “ ” to take a photo.
-
Press “ ” to switch to “video recording” mode, and press “ ” to start recording.
81mage Playback:
Press M to switch to playback mode, press “ ” to select photo or video, press
OK to play back the video.
Parameters
Camera
Work Environment
Troubleshooting
*If you have any problems with the product, you can contact us and we will give you feedback within 24 hours and solve the problem as soon as possible .
After-sales Service
If you have any questions, feel free to contact us.
The Anykit team is ready to offer you the best support.
- Manufacturer Service
- support@anykit.com
- 1-877-888-7979(US)
- (Mon-Fri 8: 00 AM-5:00 PM PST)
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>