JOYROOM JR-ZS409 Magnetic Wireless Car Charger Holder User Manual
- July 2, 2024
- Joyroom
Table of Contents
JOYROOM JR-ZS409 Magnetic Wireless Car Charger Holder
Specifications
- Model: JR-ZS409
- Name: Magnetic Wireless Car Charger Holder
- Material: PC+ABS
- Input: 5V 2A, 9V 2A, 12V 2A
- Output: 5W/7.5W/10W/15W (MAX)
- Input port: Type-C
- Applicable phone size: 4.7-7.0 inches
Product Usage Instructions
Installation:
- Put the ball head into the nut first, then insert it into the socket on the back of the holder, and tighten the nut.
- Install the vent hook onto the air vent and adjust it to the desired angle.
Charging:
- Connect the holder and the car charger using the Type-C charging cable included in the package.
Using the Magnetic Feature:
- Open the cleaning kit and wipe clean the back surface of your phone.
- Paste the transparent separation film onto the center of the phone back.
- Adhere the metal ring onto the center of the phone back using the alignment card provided.
FAQ
- Q: Can this product be used with phones other than iP mag-safe phones?
- A: Yes, for other phones and cases, a metal ring is required to use this product.
- Q: What should I do if my phone is not charging on the holder?
- A: Ensure that the metal ring properly adheres to the center of your phone back and that the alignment is correct for wireless charging to work effectively.
- Q: How do I claim a warranty for this product?
- A: Fill out the warranty card with your details and contact the dealer from whom you purchased the product for any warranty claims.
Parameters
- Model: JR-ZS409
- Name: Magnetic Wireless Car Charger Holder
- Material: PC+ABS
- Input: 5V 2A 9V 2A 12V 2A
- Output: 5W/7.5W/10W/15W (MAX)
- Input port: Type-C
- Applicable phone size: 4.7-7.0”
Accessory kit
- Metal ring x1, Separation film x1,
- Cleaning kit x1, Alignment card x1
Product diagram
Operation steps
- Put the ball head into the nut first , then insert it into the socket on the back of the holder, tighten the nut.
- Install the vent hook onto the air vent, and adjust to the desired angle
- Use the Type-C charging cable in the package to connect the holder and the car charger.
- Place your phone. It will be securely attached to the charger holder with its auto-alignment function.
Operation steps (metal ring)
- Open the cleaning kit, wipe clean the back surface of your phone.
- Paste the transparent separation film onto the center of the phone back.
- Adhere the metal ring onto the center of the phone back by use of the alignment card.
Note: Just make sure the upper and lower scales, as well as the left and\ right scales of the alignment card, are equal, the metal ring will adhere to the center.
Reminder: The product can be used directly with iP mag-safe phones with/without a magnetic case. For other phones and cases, a metal ring is required
Warranty Card
Warranty
- A. If there is a performance failure on this product and it’s not caused by human error, we will provide a 12-month free warranty service for consumers from the date of purchase.
- B. Warranty exceptions:
- Human damage;
- Expired the warranty period;
- Failure to provide valid purchase certificate;
- Product damage caused by failure to follow the use, maintenance and care instructions;
- Product damage caused by disassembling or repairing the product without authorization, or immersing the product in water;
- Damage caused by force majeure.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>