h2o audio MP8-BL-SHO Stream Waterproof MP3 Bluetooth Player User Guide

: June 6, 2024
: h2o audio

Table of Contents

1 YEAR WARRANTY
USER TERM STREAM MP3 PLAYER
BLUETOOTH PLAY
FCC Statement
RF Exposure Information
Read User Manual Online (PDF format)
Download This Manual (PDF format)

STREAM
WATERPROOF MP3/BLUETOOTH PLAYER

USER GUIDE

HOW TO USE

| Volume
---|---
Volume down
Hold to adjust the volume up.
Tap to go to next track.
Push and hold to power on/off.
Tap once to play or pause.
Hold to adjust the volume down.
Tap to go to the previous track.
Push to enter Bluetooth mode.
Push again to resume MP3 mode.
Push to enter shuffle mode.
Push again to resume play in order.

1 YEAR WARRANTY

Your stream waterproof MP3/Bluetooth players warranted boy H2O Audio against defects in materials, under normal use, for one year beginning from the original date of purchase.

USER TERM STREAM MP3 PLAYER

HOW TO CHARGE

Plug the included USB cord in the headphone jack of the H20 Stream to either a computer or a USB wall adapter
The light will be Solid Red while charging, and turn Solid Blue when fully charged (it takes about 3 hours to fully charge).
Your H20 Stream has a battery life of 8-10 hours (depending on use).

HOW TO ADD CONTENT (PC)

Connect the H20 Stream to your computer with the included USS cord.
The computer will recognize the H20 Stream as a new drive.
Find the music you would like to copy to your H20 Stream, right-click the music, hover over “Send to”, then click H2O STREAM”.
When finished Eject” the H2O Stream by double-clicking it in the System Tray.

HOW TO ADD CONTENT (MAC)
NOTE: iTunes music needs to be converted to .MP3 format.

Connect the H20 Stream to your computer with the included USB cord.
Your Mac will recognize your H20 Stream as a drive that will appear on your desktop. Or. open the Finder and H2O STREAM” will appear under Devices”
Open a new Finder window and find the the music you would like to copy
Drag and drop the music onto the H20 Stream icon on your desktop
When finished “Eject” the H20 Stream by dragging the icon to the Trash”

BLUETOOTH PLAY

UNIT OPERATION / BLUETOOTH PLAY
The H20 STREAM can receive Bluetooth music from your smartphone and play ii.
You will need to pair your STREAM with your smartphone to enable this feature.

To Pair STREAM with Smartphone:

Press the Bluetooth button to switch the device from ‘Play from Memory’ mode to ‘Bluetooth Play’.
You should hear “Bluetooth Play”.
To enter into Pairing Mode. hold the Bluetooth button until you hear the voice Bluetooth Pairing Mode”. You should then see the H20 STREAM device appear in your phone’s Bluetooth settings. Select the device to connect. The pairing is only needed once. Your smartphone should remember your setting the next time you power on your H2O Stream.
Turn on the music on your smartphone and select the Bluetooth function. Make sure the H20 Stream is ON and you have selected “Bluetooth Play” mode.

SUPPORT: Email: support@h2oaudio.com
Web: h2oaudio.com
Support: h2oaudio.freshdesk.com/support/home

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.