H2O Audio TRI Multi-Sport Headphones User Guide

H2O Audio TRI Multi-Sport Headphones

BATTERY

HOW TO CHARGE

Connect the 4-pin USB cable to the H20 Tri (It will attach only l way with the magnets).

• BATTERY CHARGING: Red LED
• BATTERY FULL: Blue LED
• FULL BATTERY PLAY TIME: ~8hr

When you turn ON the H20 TRI
you will hear the current battery level status.

TURN ON/OFF

Press and hold the middle button for 3 seconds.

BUTTON FUNCTIONS

+/- BUTTONS

• VOLUME UP/DOWN: 1-Click
• SKIP SONG: Hold + or – to skip to the next or previous track,
• SKIP FOLDER: 2-click to advance to the next/previous folder (only in memory play mode)

M (MIDDLE/MODE BUTTON)

• POWER ON/OFF: Hold (3 sec) to Power ON/OFF
• PLAY/PAUSE: 1-Click to Play/Pause audio
• MODE CHANGE (Memory <·> Bluetooth): 2-Click (Double Click)
  RESET: Hold for 10 seconds to Reset. Make sure headphones are Off. After l O seconds you will see the LED light blink 3 times.

SHUFFLE MODE:
3-click (triple click) to turn on/off (Only in memory mode)

SIRI/VOICE ASSISTANT
Long Press (Only in Bluetooth Mode)

ANSWER INCOMING CALL
1-click (Only in Bluetooth Mode)

DOWNLOADING MUSIC TO MEMORY

• Make sure the battery is changed. If the battery is too low the USB connection may fail.

• Turn OFF the headphones.

• Then, connect the USB cable to the H2O TRI 4-pin connector and then to the computer USB port. DO NOT BUMP the headphones while it is connected.

• After connecting, wait for a few moments for the computer to register the device.

• H2O TRI will appear as a memory drive or USB Memory device in the File Explorer (Windows) or Finder App (MAC).
  IMPORTANT NOTE: Subscription-based music like Spotify, Apple Music, Pandora, etc. are copyright protected and can NOT be copied to the memory

• Find the music files on your computer. The H2O TRI can play .MP3, WMA, and .M4A (Apple iTunes) music.

• Select or Copy the music files and then copy/paste or ‘drag & drop the files to the H2O TRI.

• The file transfer will start, Do not disconnect until all files have been copied.

• To remove or delete files on the H2O TRI – simply select the files in the H2O TRI memory and Delete them or drag to Trash.

• To disconnect it from the Computer, click Eject the H2O TRI or simply disconnect it.

TROUBLESHOOT USB CONNECTION

If you are having trouble with the USB connection, disconnect the H2O TRI from the computer, power off H2O TRI and restart the computer, After your computer has done a full restart – try to connect again. You can also try a different USB port. Make sure your H2O TRI battery is charged. You can also reset the H2O TRI headphones, Turn Off the headphones and hold the Mode button for l O sec. You will see a 3-blinking LED light.

MEMORY MODE (FOLDERS & SHUFFLE)

• The music can be organized into different folders.
• Skip to next or previous folder= 2-CLICK +/- button.
• Turn on Shuffle Mode: 3-click the M button to turn on / off shuffle mode.

BLUETOOTH CONNECTION & PAIRING

• Start with the H2O TRI headphones OFF.
• Power ON the headphones (press the middle button for 2 sec). You will hear the start-up prompts and battery level. The default start will be MEMORY MODE.
• Change the MODE to BLUETOOTH MODE by 2-click or double-clicking the M button. You will then head – Bluetooth Mode.
• Go to the Bluetooth Settings on your phone or smartwatch. Look for the H2O TRI name and select it. This will complete the pairing and you will hear the “Connected” prompt. A blue blinking LED light will also indicate that the Bluetooth is connected.

PLEASE NOTE
Bluetooth connection has a range of approx. l 0m/30ft. in air and l 0cm/2 inches under water. Bluetooth does not penetrate water (due to laws of physics) PLEASE SEE SWIMMING WITH H2O TRI for more about Bluetooth Mode.

HOW TO WEAR

The H2O TRI headphones are OPEN EAR and use Bone Conduction. The Speakers are sitting IN FRONT of the ear vs in the ear, leaving your ear open for other surrounding sounds.

BIKING & RUNNING

WITH H20TRI
When biking or running, you can use either Bluetooth or the Memory Mode.

• The memory mode will play music from the internal memory without the need of any other devices. i.e. you can leave your phone at home.
• The Bluetooth mode will receive audio from a device you are carrying. Make sure you have paired the headphones with the device.

SAFETY TIP
It is important to adjust the audio level so that you are able to hear ambient sounds from around you – cars, traffic, etc. The H20 TRI has an open ear design that will allow you to hear what’s around you easier.

SWIMMING WITH H2O TRI

WHICH MODE SHOULD I USE?
When swimming, we recommend using the Memory Mode -as this will provide you the uninterrupted sound without the need of additional devices,

However, if you have a music-enabled smartwatch like the Apple Watch -you can use this as the source for your audio while swimming, However, you need to place the smartwatch within 2-3 inches from the headphones, Put the watch under your swim cap or use the H20 Audio Apple Watch Clip (sold separately). NOTE: The Bluetooth range underwater is only a few inches (due to laws of physics)

HOW TO WEAR DURING SWIMMING:
Use your swim goggle strap or swim cap over the headphones to better keep the headphones in place.

TIP
For the best audio experience, we recommend using earplugs to reduce the ambient sound of water splashing.

SUPPORT & TROUBLESHOOT

TO RESET THE H20 TRI HEADPHONES
Make sure the power is OFF, then press and HOLD the Power button for 12 seconds. This will reset the headphones.

ANY ISSUES?
Please do not hesitate to contact us at

SUPPORT@H20AUDIO.COM
Please note that your product has a 1-YEAR WARRANTY. H20AUDIO.coM.

FOR MORE TIPS AND VIDEOS

SCAN ME
H2OAUDIO.COM/PAGES/H20-TRI-HEADPHONES.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>