MiBOXER TRI-PR AC Triac Dimmer Instruction Manual

TRI-PR AC Triac Dimmer

AC Triac Dimmer (2.4GHz + Push)
Model No.: TRI-PR

1. Feature

Simple appearance design, convenient construction, Wide application
for single color triac LED lights, filament lamps, Halogen lamps.

• Smartphone APP control (need to buy 2.4GHz gateway)
• 2.4G RF wireless remote control
• Push dimming function
• Trailing edge phase-cut technology
• 0~100% stepless dimming and flicker free
• Lowest brightness setting function
• Built-in temperature detecting switch, over heart /loading protection
• Auto transmitting function, unlimited control distance
• Screw connector is reliable and easy to do installation
• Anti-fire PC shell is more safety

2. Parameter

Model No.: TRI-PR
Input Voltage: 100-240V~ 50/60Hz
Output Voltage: 100-240V~
Output Current: Max 2.27A
Output Power: 250W @110V; 500W @220V
Dim Method: RF wireless dimming
Working Temperature: -10~40°C
Control Distance: 30m

3. Connection Diagram

Method 1:

Method 2:

Attention

Please check and ensure that all cable had done correct connection
before turn on it, otherwise the dimmer is easy to be damaged.

“Breaker mode” is activated or shut down

Attention: It only support to turn on/off light, user can not dim
device once this mode is activated

Turn On: short press “ LINK ” 5 times quickly, mode had activated once
indicator blink 3 times quickly
Turn Off: short press “ LINK ” 5 times quickly, mode had shut down once
indicator flash 3 times slowly

4. PUSH Dimming

Short press PUSH switch:
Turn ON/OFF light

Long press PUSH switch:

• Stepless dimming brightness.

• Long press and release your finger, then repeat long pressing to increase or
  decrease brightness

• Please long press switch 20 seconds until all lights have same brightness with
  100% level if multi dimmers had connect with same self-return switch. The
  quantity of dimmers which connect with same self-return switch can not be
  over 25 pieces, the connection cable of self-return switch can not be over 20m.

5. Remote control instruction

5.1. Link remote

For K1 remote

1). Learning code
For other remote
Way 1: short press “ LINK ” one time.
Way 2: power off dimmer 10 seconds and
power on again
Way 3: short press Push switch (ON – OFF)

2). Press “SET” 3 times within 3 seconds, linking
code is done once the light flashes 3 times slowly

For other remote

1). Learning code
2). Press “ON” any “ ” button in group zones
3 times within 3 seconds, linking code is
done once the light flashes 3 times slowly

5.2. Unlink with remote

For K1 remote
1). Learning code
2). Press “ON” any “ ” button in group zones
5 times within 3 seconds, unlinking is done
once the light flashes 10 times quickly

5.3. Compatible remote (purchase separately)

5.4. Auto transmitting

One light can transmit the signals from the remote control to another
light within 30m, as long as there is a light within 30m, the remote
control distance can be limitless.

Attention: All dimmer must link with same remote

6. Set up min brightness

6.1. Set up min brightness with “ SET ” button
Short press “SET” to get 10 kinds of brightness: 3%, 5%, 7%, 9%, 12%,
17%, 22%, 28%, 34%, 40%

6.2. Set up min brightness with remote
This function should be paired with remote firstly before setting.

For K1 remote
1). Long press “SET” 3 seconds until the light flashes one time,
indicator is going into flashing status
2). Short press “SET” to get 10 kinds of brightness: 3%, 5%, 7%, 9%,
12%, 17%, 22%, 28%, 34%, 40%
3). Short press rotating button to confirm setting or waiting for 10
seconds to be confirmed automatically, the light will recover
brightness to previous level.

For other remote
1). Long press the “OFF” button on the remote or “O” button on the
zone, until the light flashes one time, indicator is going into flashing
status
2). Short press the “OFF” button on the remote or “O” button on the
zone to set up 10 different brightness (3%, 5%, 7%, 9%, 12%, 17%,
22%, 28%, 34%, 40%)

7. Attention

1. Please turn off power supply before installation.
2. Please ensure input voltage to be same as requirements from device.
3. Don’t disassemble device if you are not expert, otherwise it will damage it.
4. Please do not use the light in the place with widely range metal area
or strong electromagnetic wave nearby, otherwise, the remote
distance will be seriously affected.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>