baseus VO20 Portable Bluetooth Speaker User Manual
- June 29, 2024
- Baseus
Table of Contents
baseus VO20 Portable Bluetooth Speaker
Baseus AeQur VO20 Portable Wireless Speaker
Before using the product. thoroughly read this manual. Keep the manual for
future reference.
Pairing
-
Power-on
When powering on the device for the first time, long press the multifunction key switch for 2 seconds to power it on. The multifunction key indicator and ambient light will flash, and the device enters the wireless pairing mode. -
Wireless connection
Tum on the wireless function of the mobile phone to enter the search and pairing state.
Select the device model: Base us AeQur V020
Subsequent use of the speaker will automatically reconnect to the last device used. During reconnection, the multifunction key indicator and ambient light will flash. -
Download the app and log in
-
Power-off
Long press the Power button for 3s to turn off the speaker.
Instructions
Light control
Long press the Light button to tum on/off the lights.
Tap the Light button to switch light effects (default RGB breathing cycle
-solid blue- solid purple -solid orange- smart lighting effect, cydically
switching between five light effects).
Light effects can be customized and set within the app.
TW SPairing
-
- Tum off Bluetooth on your phone, and triple-press the EQ button. The RGB light will stay white to enter pairing mode. Once successfully paired, the Multifunction button indicator and the RGB blue light will flash simultaneously, indicating that it is ready to be connected to your phone.
- Triple-press theEQ button to unpair from TWS.
Note: The speaker has a memory function for pairing, and to unlink, you need to press the multifunction key five times to restore factory settings.
Reset to factory settings:
While the device is powered on, press the multifunction button 5 times.
Power indicator:
While charging, the Multifunction button indicator light will be pulsing blue.
Once fully charged, the blue light will stay on.
Warnings
Improper use of the product can easily cause damage to the product or may
endanger personal and property safety.
-
This product contains battery inside. Please avoid exposing the product to the sunlight, electric heater or similar overheating environments. Do not store the product in high temperature, strong light and strong magnetic places.
-
Do not keep it in other harsh environments such as near the fire source. Intense physical actions such as knocking, throwing, trampling on squeezing, or putting into fire shall be avoided. Do not use it in case of expansion.
-
The ambient temperature of product is 0-40″C.
-
Inappropriate use of the product against this user manual or ignoring warnings can easily cause damage to the product or may endanger personal and property safety. Consumers shall bear for all the consequences, to which our company will not assume any legal liability.
-
Decomposition of this product by non-professionals is strictly prohibited. Otherwise, it may cause a fire or damage the product.
-
Do not use a load (electrical appliances) that exceeds the output current of this product. A circuit protection mechanism is built-in to automatically stop working if loads exceed.
-
Do not put this product in water(or washing machine). Any damage resulting from water into the earphones caused by the consumers themselves, the responsibility falls to the consumers, where our company won’t be able to provide any after-sales or retumservices.
Note: For the waterproof level, please refer to the detailed introduction. -
If consumers use power adapters for charging, they should purchase power adapters that have CCC certification and meet the standard requirements.
Specifications
“The above data are measured by the Baseus laboratory, the actual use can be slightly different depending on the specific circumstances.
Content 
Changes or modifications not expressly approved by the
party responsible for compliance could void the user’s authority to operate
the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject 1D the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to PartlS of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radio! radio frequency energy, and if not instilled and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee!e that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined bitumen the equipment off and on, the user Is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- lease the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The product has been evaluated to meet general RF exposure requirements The
device can be used in portable exposure conditions without restriction.
The following importer is the responsible party.
- Company Name: BASEUSTECHNOLOGV (US) INC
- Address: 421 S BROOKHURST ST SUITE 1312
- ANAHEIM,CA92804
- Telephone: 6145412699
- Maximum output power:0.92dBm
- Frequency band 2.4G band(2.402GHz-2.480GHz)
- Do not listen at high volume levels for extended periods.
The Bluetooth•word mark.and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by Shenzhen Baseus Technology Co., Ltd. is under license. Other trademarks and trade names are those of their respective owners.
Warning
Please follow the above safety instructions otherwise it will cause fire,
electric shock, damage or other injuries.
Points de collecte sure www.quefairedemesdechets.fr Privileglez la niparatlon ou le don de votre apparell
Manufacturer: Shenzhen Baseus Technology Co., Ltd.
Add: 2″‘ Floor, Building B, Baseus Intelligence Park, No.2008,Xuegang Rd,
Gangtou Community, Bantian Street, Longgang District, Shenzhen Hotline:+ 1 800
220 8056 Website: https://www.baseus.com
Official After-sales E-mail Address: care@baseus.com
This symbol indicates that this product shall not be treated as household waste. Instead, it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. Follow local rules and never dispose of the product or batteries with regular household waste.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’ s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The product has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure condition without restriction. The following importer is the responsible party. Company Name: BASEUS TECHNOLOGY (US) INC Address: 421 S BROOKHURST ST SUITE 1312 ANAHEIM, CA 92804 Telephone: 6145412699
Maximum output power:0.92dBm Frequency band 2.4G band (2.402GHz-2.480GHz) Do
not listen at high volume levels for extended periods.
The Bluetooth® word mark and logos are registered trademarks owned by the
Bluetooth SIG, Inc. and any use of such marks by Shenzhen Baseus Technology
Co., Ltd. is under license. Other trademarks and trade names are those of
their respective owners.
Warning Please follow the above safety instructions otherwise it will cause fire, electric shock, damage or other injuries.
Points de collecte sur
www.quefairedemesdechets.fr Privilégiez
la réparation ou le don de votre appareil ! PAP Raccolta carta 5 FCC ID:
2A482-VO20 Manufacturer: Shenzhen Baseus Technology Co., Ltd. Add: 2nd Floor,
Building B, Baseus Intelligence Park, No.2008, Xuegang Rd, Gangtou Community,
Bantian Street, Longgang District, Shenzhen Hotline: +1 800 220 8056 Website:
https://www.baseus.com .
Official After-sales E-mail Address: care@baseus.com