HOFTRONIC 1S3W Sienna LED Porch Lights Dimmable User Manual

HOFTRONIC 1S3W Sienna LED Porch Lights Dimmable

PLEASE NOTE:
THESE SPOTLIGHTS ARE NOT SUITABLE AS FLOOR OR DECK SPOTLIGHTS

Please read this manual carefully before installing and using the downlights. Do this for your own safety and to prevent damage to the product. This manual is applicable to LED recessed downlights. The kit is delivered ready for use with the number of downlights you selected, including 5 meters of cable per spot, a dimmable LED driver, connectors, and remote control.

INSTALLATION INSTRUCTION

1. First, check whether all the parts are in the box and test the kit before installing it permanently.
2. Drill the holes with a saw size of 44 mm to the desired position. Position the cables of the LED recessed spotlights at the desired location.
3. Place the LED recessed spots in the drill hole so that the two springs touch the material. Push both springs in succession against the downlight and put the downlight in place.
4. Connect the LED recessed spots to the connector, note that each connector has 6 ports.
5. Switch the power group off, then connect the transformer to 230V (INPUT). N = cable blue and L = cable brown. Connect the INPUT of the transformer with an on / off switch (fixed mains current).
6. If the transformer is installed outdoors, it must be placed in a water/moisture-resistant housing (ART. NO. 396302 or 4409418). The recessed spots can only be used as recessed spots in a covered area.
7. The remote control supplied as standard has already been paired with the transformer, insert the batteries into the remote control, the set is now ready for use.
8. Optionally, the set can be expanded with a remote controller or wall dimmer.

FREQUENTLY ASKED QUESTIONS

How many spots can I connect at least?
1 spot

The light does not go on what now?
Try plugging the spotlight into a different port and then check to see if it works. If it still does not work, reach out to your distributor.

Can I extend the set?
The set is expandable, the standard is a 1-channel remote control supplied, Do you need more than 12 spots? Then order multiple sets and a multi-zone remote control, this allows you to control up to 36 spots.

STANDARD REMOTE CONTROL

The remote control is taught-in as standard from the factory setting and does not have to be registered on the transformer. Insert the supplied batteries into the remote control, which is now ready for use. Below you will find the functions of the remote control.

1. SET – Pairing with driver
2. ON – Turn on
3. OFF – Turn off
4. Brightness (+) – Gradually increase brightness
5. Brightness (-) – Gradually decrease brightness
6. Step Brightness (+) – Brightness in steps 10%, 30%, 70%, 100%
7. Step Brightness (-) – Brightness in steps 10%, 30%, 70%, 100%
8. Mode – Brightness 100%
9. Night light – Brightness 10%
10. DIY1/DIY2 – Congure DIY modus
11. Delay – Turn off after 30 seconds

Pairing Remote Control

1. Disconnect the power of the driver
2. Press and hold the SET button
3. Connect power to the driver
4. Release the SET button as soon as the lights flicker
5. Press the Mode button 4 times repeatedly.

COMPATIBLE WITH

REMOTE CONTROLS

• Remote control 2 channel, SKU: 5422294
• Remote control 4 channel, SKU: ITL-R-4

WALL DIMMERS

• Wall panel, SKU: 5422300
• Wall panel, SKU: ITL2.4GMD

INTENDED USE/APPLICATION
Product designed for use in households and for other similar general applications.

MOUNTING

Technical changes reserved. Read the manual before mounting. Mounting should be performed by an appropriately qualified person. Any activities to be done with disconnected power supply. Exercise particular caution. Product has a protective contact/terminal. Failure to connect the protective lead may lead to electric shock. Mounting diagram: see pictures. Check for proper mechanical fastening and connection to electrical power prior to first use. The product can be connected to a supply network that meets energy quality standards as prescribed by law. To maintain the proper IP protection level, the right diameter of the power cable should be selected for the cable gland used in the product.

FUNCTIONAL CHARACTERISTICS
The product can be used indoors and outdoors.

USAGE GUIDELINES/MAINTENANCE

Any maintenance work must be performed when the power supply is cut off and the product has cooled down. Clean only with soft and dry clothes. Do not use chemical detergents. Do not cover the product. Ensure free air access. The product may heat up to a higher temperature. The product can only be supplied by rated voltage or voltage within the range provided. It’s forbidden to use the product with a damaged protective cover. The product must not be used in unfavorable conditions, e.g. dust, water, moisture, vibrations, explosive air atmosphere, fumes, or chemical fumes, etc. Non-demountable product. Not suitable for independent repairs.

ENVIRONMENTAL PROTECTION

Keep your environment clean. Segregation of post-packaging waste is recommended. This labeling indicates the requirement to selectively collect waste electronic and electrical equipment. Products labeled in this way must not be disposed of in the same way as other waste under the threat of a fine. These products may be harmful to the natural environment and health and require a special form of recycling/neutralising. Products labeled in this way should be returned to a collection facility for waste electrical and electronic goods. Information on collection centers is provided by local authorities or sellers of such goods. Used items can also be returned to the seller when a new product is purchased, in quantity no larger than the purchased item of the same type. The above rules regard the EU area. In the case of other countries, regulations in force in a given country must be applied. Contacting the distributor of our products in a given area is recommended.

COMMENTS/GUIDELINES
Failure to follow these instructions may result in e.g. fire, burns, electrical shock, physical injury, and other material and non-material damage. For more information about Hoftronic products visit www.hoftronic.com. Hoftronic shall not be responsible for any damage resulting from the failure to follow these instructions. Hoftronic reserves the right to make changes in the manual – the current version can be downloaded at www.hoftronic.com.

DECLARATION OF CONFORMITY

DOCUMENTATION
This product has been manufactured and supplied in compliance with all relevant regulations and directives applicable to all member states of the European Union. The product complies with all applicable regulations and rules in the country of sale.

Formal documentation such as the declaration of conformity, the safety data sheet, and the product test report is available upon request.

CE DECLARATION
The product complies with the following directives:

• LVD: 2014/35/EU
• EMC: 2014/30/EU
• RoHS: 2011/65/EU

The complete Declaration of Conformity Document (DOC) is available upon request.

Imported by

HOF Trading B.V.
Fahrenheitstraat 11, 6003 DC Weert , The Netherlands Made in P.R.C. www.hoftronic.com.

References

• HOFTRONIC - HOFTRONIC

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>