TECH STT-230/2T Thermoelectric Actuator Stt User Manual
- June 28, 2024
- TECH
Table of Contents
STT-230/2T Thermoelectric Actuator Stt
“`html
Product Information
Specifications
-
Model: STT-230/2T
-
Intended Use: Temperature management in heating zones of
buildings -
Installation Requirement: Should be installed by a qualified
electrician -
Energy Efficiency: Contributes to significant energy
savings -
Warranty: Warranty card required for free repairs within 14
days
Product Usage Instructions
Safety Precautions
WARNING: The device should only be installed by a qualified
electrician to ensure proper functioning and safety.
Description
The STT-230/2T actuator allows users to efficiently manage the
temperature in specific heating zones of a building. It ensures
optimal heating comfort and helps in saving energy.
Installation Steps
-
Ensure the power supply is turned off before installation.
-
Mount the actuator in the desired heating zone securely.
-
Connect the actuator following the provided wiring
instructions. -
Test the functionality of the actuator before regular use.
Temperature Adjustment
To adjust the temperature in a specific heating zone, use the
controls provided on the actuator. Follow the user manual for
detailed instructions on setting the desired temperature.
FAQ
Q: What should I do if I lose the Warranty Card?
A: If the Warranty Card is lost, the manufacturer does not issue
a duplicate. Contact customer service for further assistance.
Q: Can children operate this device?
A: The device is not intended to be operated by children. Ensure
proper adult supervision when using the actuator.
“`
USER’S MANUAL STT-230/2T
EN
WARRANTY CARD
TECH STEROWNIKI II Sp. z o.o. company ensures to the Buyer proper operation of
the device for the period of 24 months from the date of sale. The Guarantor
undertakes to repair the device free of charge if the defects occurred through
the manufacturer’s fault. The device should be delivered to its manufacturer.
Principles of conduct in the case of a complaint are determined by the Act on
specifi c terms and conditions of consumer sale and amendments of the Civil
Code (Journal of Laws of 5 September 2002).
THE DEVICE IS NOT INTENDED TO BE OPERATED BY CHILDREN.
Activities related to setting and regulation of the controller parameters
described in the Instruction Manual and parts wearing out during normal
operation, such as fuses, are not covered by warranty repairs. The warranty
does not cover damages arising as a result of improper operation or through
the user’s fault, mechanical damage or damage created as a result of fi re, fl
ood, atmospheric discharges, overvoltage or short-circuit. The interference of
an unauthorized service, wilful repairs, modifi cations and construction
changes cause the loss of Warranty. TECH controllers have protective seals.
Removing a seal results in the loss of Warranty.
The costs of unjustifi able service call to a defect will be borne exclusively
by the buyer. The unjustifi able service call is defi ned as a call to remove
damages not resulting from the Guarantor’s fault as well as a call considered
unjustifi able by the service after diagnosing the device (e.g. damage of the
equipment through the fault of the client or not subject to Warranty), or if
the device defect occurred for reasons lying beyond the device.
In order to execute the rights arising from this Warranty, the user is
obliged, at his own cost and risk, deliver the device to the Guarantor along
with a correctly fi lled-in warranty card (containing in particular the sale
date, the seller’s signature and a description of the defect) and sales proof
(receipt, VAT invoice, etc.). The Warranty Card is the only basis for repair
free of charge. The complaint repair time is 14 days.
When the Warranty Card is lost or damaged, the manufacturer does not issue a
duplicate.
……………………………….. seller’s stamp
……………………………….. date of sale
Safety
Before using the device for the fi rst time the user should read the following
regulations carefully. Not obeying the instructions included in this manual
may lead to personal injuries or controller damage. The user’s manual should
be stored in a safe place for further reference. In order to avoid accidents
and errors it should be ensured that every person using the device has
familiarized themselves with the principle of operation as well as security
functions of the controller. If the device is to be sold or put in a diff
erent place, make sure that the user’s manual is there with the device so that
any potential user has access to essential information about the device. The
manufacturer does not accept responsibility for any injuries or damage
resulting from negligence; therefore, users are obliged to take the necessary
safety measures listed in this manual to protect their lives and property.
WARNING The device should be installed by a qualifi ed electrician.
We are committed to protecting the environment. Manufacturing electronic devices imposes an obligation of providing for environmentally safe disposal of used electronic components and devices. Hence, we have been entered into a register kept by the Inspection For Environmental Protection. The crossed-out bin symbol on a product means that the product may not be disposed of to household waste containers. Recycling of wastes helps to protect the environment. The user is obliged to transfer their used equipment to a collection point where all electric and electronic components.
Description
STT-230/2T actuator allows the user to easily and effi ciently manage the
temperature in particular heating zones of a building. The system controlling
the actuator ensures optimum heating comfort and contributes to signifi cant
energy saving.
Technical data
Power supply 230V/AC Power consumption 3W Pressure force – 110N Opening
time 180-300 sekund Connection type – M30 * 1.5 Operating temperature – od
-5 do 50°C Protection – IP45 Connection cable – brown/blue H05VV-F 2×0,75 mm2
EU DECLARATION OF CONFORMITY
Hereby, we declare under our sole responsibility that STT-230 T manufactured
by TECH STEROWNIKI II Sp. z o.o., head-quartered in Wieprz Biala Droga 31,
34-122 Wieprz, is compliant with Directive 2014/35/EU of the European
Parliament and of the Council of 26 February 2014 on the harmonisation of the
laws of Member States relating to the making available on the market of
electrical equipment designed for use within certain voltage limits (EU OJ L
96, of 29.03.2014, p. 357), Directive 2014/30/EU of the European Parliament
and of the Council of 26 February 2014 on the harmonisation of the laws of
Member States relating to electromagnetic compatibility (EU OJ L 96 of
29.03.2014, p.79), Directive 2009/125/EC establishing a framework for the
setting of ecodesign requirements for energy-related products as well as the
regulation by the MINISTRY OF ENTREPRENEURSHIP AND TECHNOLOGY of 24 June 2019
amending the regulation concerning the essential requirements as regards the
restriction of the use of certain hazardous substances in electrical and
electronic equipment, implementing provisions of Directive (EU) 2017/2102 of
the European Parliament and of the Council of 15 November 2017 amending
Directive 2011/65/EU on the restriction of the use of certain hazardous
substances in electrical and electronic equipment (OJ L 305, 21.11.2017, p.
8). For compliance assessment, harmonized standards were used: PN-EN IEC
60730-2-9:2019-06, PN-EN 60730-1:2016-10, PN EN IEC 63000:2019-01 RoHS.
Wieprz, 13.05.2024