Tech Pets T4P-TRTPOOPER Smart Treat Dispenser User Manual
- October 27, 2023
- Tech Pets
Table of Contents
**Tech Pets T4P-TRTPOOPER Smart Treat Dispenser User Manual
**
WHAT’S IN THE BOX
- Smart Treat Dispenser
- USB Cable
- Power Adapter
- User Manual
SPECIFICATIONS
- App: Laser SmartHome
- Software Requirements: iOS 7.0 or Android 5.0 and higher
- Video Resolution: 1080p
- Camera: 130° Wide Angle with Night Vision
- Food Bin Capacity: 500g
- Food Size: 2 – 10mm (dry food only)
- Wireless Technology: Wi-Fi 2.4GHz (5GHz not supported)
- Input: 100 – 240V, 50Hz/60Hz, 0.4A
- Output: 5V/1A
- Dimensions: 132 x 130 x 254m
- Weight: 1.1kg
PRODUCT DIAGRAM
INDICATOR LIGHT STATE
| Slow blinking GREEN light | AP Pairing Mode. |
|---|---|
| Fast blinking GREEN light | EZ or QR Code Pairing Mode. |
| Solid GREEN light | Device is ON and network connected |
| Slow blinking RED | No treats in the bucket or dispenser is blocked. |
BUTTON CONTROLS
- Tap the “Setup & Manual Treat Button” to manually dispense treat (no need to connect to the App).
- Press and hold the button for 8 seconds to reset the device and put into network pairing mode.
There are 2 flashing states
- Fast Flashing = EZ pairing mode.
- Slow Flashing = AP pairing mode.
Note: In this manual we cover the QR pairing mode instructions.
GETTING STARTED WITH THE APP
-
Install the Laser SmartHome App for your Smartphone from the iOS App Store or Google Play Store.
-
Log in with an existing Laser SmartHome account or create a new account.
CONNECTING TO THE APP
-
Press and hold the “Setup & Manual Treat Button” on the Treat Dispenser for 8 seconds till you get a fast-flashing Green light.
If the light is flashing slowly, press and hold the button again till you get the fast-flashing version. -
Open the Laser SmartHome App and tap the “+” icon to add a device.
-
Select the “Small Home Appliances” category on the left then select “Pet Feeder with Camera (Wi-Fi)”.
-
Enter your Wi-Fi details
-
On the next screen tap the option in the top right and select “QR Code”.
-
Select the checkbox, then tap Next.
-
On the next screen you will need to hold the QR Code on the App towards the camera lens on the Treat Dispenser. A tone will be heard when done correctly. Tap “I Heard a Prompt” to continue
Tip: Move the QR code on the phone away, then towards the camera lens a few times so that it can detect it properly.
-
Wait for the network pairing to complete.
-
When finished pairing tap “Done”, then the device will appear on the Laser SmartHome App home screen.
NOTE: If you are unable to pair successfully with the Treat Dispenser, please check your Wi-Fi password and make sure you are only using a 2.4GHz Wi- Fi connection. 5GHz connections are not supported
USING THE TREAT DISPENSER
TROUBLESHOOTING
Why is the treat not dispensing?
- Check the food bucket has available food.
- If the food bucket is not empty, check if the outlet is blocked. Clean or unblock if necessary (please power off the device during cleaning).
- Check the Treat Dispenser is paired with the App and then check the Wi-Fi connection it is linked to.
The Treat Dispenser is not connecting to the App.
- Check your Wi-Fi username and password are correct.
- Make sure you are only using a 2.4GHz Wi-Fi connection as the 5GHz band is not supported.
- If you are unsuccessfully connecting using the QR Code. Switch the pairing mode to “AP Mode” by pressing and holding the “Setup & ManualTreat Button” till you get a slow flashing Green light. Proceed with the regular “Connecting to App” instructions outlined in this manual but on Step 6, choose “AP Mode”. Follow the instructions on the App to finish pairing.
Visit our website
Check us out at
YOU TUBE
Documents / Resources
| Tech
Pets T4P-TRTPOOPER Smart Treat
Dispenser
[pdf] User Manual
T4P-TRTPOOPER, Smart Treat Dispenser, T4P-TRTPOOPER Smart Treat Dispenser,
Treat Dispenser, Dispenser
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>