Jay Tech Cameras VIDAA 43 Inch UHD Smart TV Instruction Manual

Jay Tech Cameras VIDAA 43 Inch UHD Smart TV

Product Information

The SMART TV is a 43-inch UHD (Ultra High Definition) television with a model number S43U34302VJ. It has a screen size of 24, 28, and 32 inches. The TV comes with a user manual, remote controller, power cord, and two AAA batteries (optional). The lifetime of the
TV is 60,000 hours. The TV is manufactured under license from Dolby Laboratories and features Dolby Audio.
The TV has different power consumption levels ranging from 30W to 260W, depending on the screen size. The TV dimensions are not mentioned in the manual.

Product Usage Instructions

1. Unpack the TV and check if all the accessories mentioned in the manual are available.
2. Place the TV on a flat surface or mount it on a wall as per your preference.
3. Connect the power cord to the TV and plug it into an electrical outlet.
4. Insert the batteries into the remote control.
5. Power on the TV and follow the on-screen instructions to set up the TV.

Warning

1. Do not place the TV on cloth or other materials that may be located between the TV and supporting furniture.
2. Make sure to educate children about the dangers of climbing on furniture to reach the television set or its controls.
3. If you are retaining and relocating your existing television set, follow the same considerations as above.

Suggestion
To make it more convenient for base installation and to avoid any risk of scratches and damage, use a PH2 screwdriver to tighten the base screws.

Safety Information

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operting in the literature accompanying the appliance.

Warning
The lightning flash with the arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the products enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

Caution RISK OF ELECTRIC SHOCK
High voltages are used in the operation of this product.to reduce the risk of electric shock, do not remove cover of the cabinet, refer servicing to qualified service personal
If the TV any changes or coarse adjustment, electric shocks to be hurt, do not attempt to open a machine-maintenance, customer contact centres needed over haul.

Important Safety Precautions

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with dry cloth.

7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety, If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

10. Protect the power cord from being walked on or pinched particularly at Plugs, convenience receptacles, and the point where they exit from the apparatus.

11. Only use attachments /accessories specified by the manufacturer.

12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used caution when moving the cart/apparatus combination to avoid injury tip-over.

13. Unplug this apparatus during lightning storms or when unused for long periods of time.
    Caution:

14. To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.

15. The mains plug is used as disconnect device, the disconnect device shall remain readily operable.

16. The socket-out shall be installed near the equipment and shall be easily accessible.

17. This product should never be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacture’s instructions have been adhered to.

18. The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquid, such as vases, shall be placed on the apparatus.

19. Do not place any sources of danger on the apparatus (e.g. liquid filled objects, lighted candles).

20. Wall or Ceiling Mounting – The appliance should be mounted to a wall or ceiling only as recommended by the manufacturer.

21. Never place the TV, remote control or batteries near naked flames or other heat sources, including direct sunlight. To prevent the spread of fire, keep candles or other flames away from the TV, remote control and batteries at all times.

22. The USB terminal should be loaded with 0.5A under normal operation.
    These servicing instructions are for use by qualified service personnel only. To reduce the risk of electric shock do not perform any servicing other than that contained in the operating instructions. unless you are qualified to do so.

23. The battery shall not be exposed to excessive heat such as sunshine, fire or the like.
    This equipment is a Class II or double-insulated electrical appliance. It has been designed in such a way that it does not require a safety connection to electrical earth

24. The maximum using environment temperature is 45 degrees. The Maximum using altitude is 2000 meters

TV Buttons And Terminal Interface

TV Buttons
Note: The following is only functional schematic, And the actual position and arrangement of different models may be different.

Terminal Interface
Note: The following are the various terminal interface, the actual position and arrangement, the number of different models may be different.

Note: Do not touch or be close to the HDMI, USB terminals, and prevent electrostatic discharge to disturb these terminals while in USB operation mode, or ii will cause the TV to stop working or abnormal status.

External Device Connection Diagram

TV Install And Connect

Set your TV
To put your TV on a firm place which can bear the weight of the TV.
To avoid danger, please don’t positions the TV near water or heating place (such as light, candle, heating machine),do not block the ventilation at the back of TV.

Connect antenna and power

1. Connect the antenna cable to the antenna socket on the back of the TV.

2. To plug the power cord ofTV (AC 100- 240V- 50/60Hz).
   Turn on TV

3. Connect the power supply, enter the standby mode (red light), press the power button of the TV or the power button on the remote control to turn on the TV
   Note: If the model has a Cl card slot on its top, a silicone plug for the Cl card slot can be found in the accessory bag (for models without Cl card slot, there is no such silicone plug), please insert the silicone plug into the slot when the Cl card is not in use. Note: Picture for reference purposes only.

TV Stand Installation Instructions

1. Open the carton and remove the TV and scattered accessories and base
   (some models without base).

2. ln order to avoid damaging the TV,please cover it with soft mattress,put it on the table, face down on the soft material and screw the neck of the base to the TV.

3. Screw the base and connected to the TV.

4. the installation is complete.
   Note: Picture for reference purposes only. Please prevail in kind

First Time Installation

Please according to the Text Tip to First Time Setup. Press button to select Language.

Please make sure the device has connected,
then press button to select the primary input source

HOME
Press button,you can enter HOME screen.

• You can always view the current time at the top of the Home screen.
• If your TV is connected to the Internet through a wireless connection or an Ethernet cable,then the icon will be displayed at the top corner of the screen.
• Manage apps
• Select the item you want to move.then press the button to manage.

Input
Press button to select Inputs menu. Press button to select. Press ENTER to select input.

Picture
Press (MENU] to enter the main menu, press to select picture menu.

1. Press button to select the option that you want to adjust in the PICTURE menu.
2. Press Enter button to adjust.
3. After finishing your adjustment, Press Enter button to save and return to the previous menu

Picture Mode
Press button to select Picture Mode, then press &Enter button to select. (Optional: Standard/Cinema day/Cinema night/Dynamic/Sports).

Aspect Ratio
Adjust the Aspect Ratio to stretch or zoom in on your picture.
Press button to select Aspect Ratio.
Press button to selectAutomatic/16:9/4:3/Panoramic/Movie Zoom/Direct.

Game Mode
Press to select and press to select On/Off.

Picture Mode Settings
Press to select.and press & ENTER to enter.

Picture Mode
Press button to select Picture Mode, then press &Enter button to select. (Optional: Standard/Cinema day/Cinema night/Dynamic/Sports).

Aspect Ratio
Adjust the Aspect Ratio to stretch or zoom in on your picture.
Press button to select Aspect Ratio.
Press button to selectAutomatic/16:9/4:3/Panoramic/Movie Zoom/Direct.

Game Mode
Press to select.and press to select On/Off.

Picture Mode Settings
Press to select.and press & ENTER to enter.

Initial Setup

Sound
Press MENU button to display the main menu.Press button to select SOUND in the main menu,

1. Press button to select the option that you want to adjust in the SOUND menu.
2. Press Enter button to adjust.
3. After finishing your adjustment, Press Enter button to save and return to the previous menu.

Speakers
Press button to select Speakers. Press ENTER/ button to enter sub-menu

Audio Output
Press button to select Speakers and enter, then press button to select ARC/ TV Speaker/SPDIF Only

Network
Press MENU button to display the main menu.Press button to select Network in the main menu

Press button to select :Network Configuration/Internet Connection/Bluetooth/ Wake on Wireless Network/Wake on LAN.
Channel
Press MENU button to display the main menu. Press ( ◄) / (►) button to select Channel.

1. Press button to select the option that you want to adjust in the Channel menu
2. Press Enter button to adjust.
3. After finishing your adjustment, Press Enter button to save and return to the previous menu.

Accessibility
Press MENU button to display the main menu.
Press ( ◄] / [►] button to select Accessibility in the main menu.

System

Press MENU button to display the main menu.
Press [ ◄) / [►) button to select System in the main menu

1. Press button to select the option that you want to adjust in the System menu.
2. Press Enter button to adjust.
3. After finishing your adjustment, Press Enter button to save and return to the previous menu.

Application Settings
Press button to select Application Settings ****

HDMI/CEC Funtion
Press button to select CEC Funtion,then press Enter button to enter sub-menu to select.

Press button to select CEC Control/Device Auto Power On/Device Auto Power Off/ TV Auto Power On/CEC Device Lists.
Note: All the Options are available only when the CEC Control select On.
Advanced Settings
Press button to select Advanced Settings,then press ENTER/ (►] button to enter

Support
Press button to select Support.then press ENTER/ (►] button to enter Restore To Factory Default
Press button to select Restore To Factory Default, then press ENTER/ [►] button to enter sub-menu and select.

Media

Press button to select Media on the Home page or press MEDIA button on the remote.and press OK button to enter enter the Media Center.

Video
Press button to select Video or All,and press button to select Movies.Press Me nu button to dis play the setti ng options on the left side.

Audio
Press button toselectAudioorAll,and press button to select Music.

Image
Press button to select Image or All,and press button to select Picture.

HELP

No power

| •  Check if the AC cord of 1V is plugged in or not. If there’s still no power, please disconnect the plug, and reconnect to the socket after 60 seconds. Turn the power back on.
---|---
Signal not received properly| •  Double or phantom images may appear on your 1V if there are high buildings or mountains close to where you are. You can adjust the image thru manual operation: consult instruction of vernier regulation, or adjust the direction of the external antenna.

•  If you use an indoor antenna,signal reception may be more difficult under certain circumstances. Adjust the direction of the antenna for optimum reception. If this does not improve reception, you may have to switch to an external antenna.

No picture| •  Check if the antenna at the back of the 1V is connected properly.

•  View other channels to see if the problem still occurs.

Video appears with no audio| •   Try increasing the volume.

•  Check if the lV’s sound is on mute or not.

Audio is present, but video does not

appear or is discolored

|

•  Try adjusting the contrast and brightness.

Static noise affects video and audio quality| •   Check if the antenna at the back of the 1V is connected properly.
Broken lines on screen| •  Electrical appliances such as hair dryers or vacuums etc. may be interfering with your 1V set. Switch these appliances off.

Remote doesn’t work

|

•  Make sure the plastic bag which came with the remote control is removed. Try using the remote in a shorter distance from the lV. Check if the placement of the batteries s correct, or try using new batteries with the remote control.

•  The 1V will go into Standby mode if it receives no response in a few minutes.

No video (PC mode)| •  Please check if the cable is connected to the VGA port correctly, or if the cable

is bent in some places.

Vertical line blinking

(PC Mode)

| •  Enter the main menu, and adjust the vertical placement to eliminate the vertical line.
Horizontal tearing (PC Mode)| •  Adjust the horizontal placement of the screen to clear any horizontal lines.
Screen is too bright or dark (PC Mode)|

•  Adjust the brightness or contrast in the main menu.

No response from the PC| •  Check if the PC’s display resolution is set to a compatible resolution for the lV.
Lines appearing when a device

is connected to the RCA port

|

• Make sure you are using a cable in good quality.

Problems are unresolved| •  Unplug the power cable and wait for 30 seconds, then reconnect to the socket. If problems still persist, do not attempt to repair the 1V by yourself. Kindly contact

the service center.

Do not leave your TV displaying a static image, whether it is from a paused video, menu screen, etc. for an extended period of time, doing so will damage the display and may cause image burn-in.

Remote control

1. POWER: Switches the TV between on and standby mode.
2. No effect.
3. MUTE: Mute or restore your TV sound.
4. 0-9: Figures “0-9” are used to directly input channel number.
5. FREE: Connects to FREE.
6. deezer: Connects to deezer.
7. lnputs: Display/Select signal source options.
8. VOL+/-: Press to increase / decrease the sound level.
9. CH+/-: Press to scan through channels.
10. INFO: Displays the present channel information such as the current time and channel name.
11. BROWSER: Connects to BROWSER.
12. MEDIA: Connects to MEDIA
13. Navigation buttons: Cursor UP/LEFT/RIGHT/DOWN .
14. BACK: Press to move back through menus.
15. EXIT: Exit the OSD menu.
16. HOME: Displays the home screen.
17. NETFLIX: Connects to NETFLIX for viewing online TV shows and films (internet connection required).
18. YouTube: Connects to YouTube (internet connection required).
19. Prime video: Connects to Prime video (internet connection required}.
20. PLEX: Connects to PLEX.
21. COLOR BUTTONS: There are related functions under EPG.
22. SUBT: SUBT.
23. EPG: EPG menu.
24. Media control: Play / Pause
25. CH.LIST: Channel list
26. TXT: Press to enter Teletext when play the program.
27. App customization: App customization (long press under the home page)
28. Menu: Displays the OSD (On Screen Display) menu.

Specifications

User’s manual x1

Remote controller x1 Power cord x1

AAA Batteries x2 (Optional)

28 ”| 31W/36W
32 ”| 40W/56W
39 ” /40 ”| 60W/70W/90W
42 ”| 65W/70W/90W
43 ”| 70W/80W/90W
50 ”| 100W/108W/120W
55 ”| 110W/118W/135W
58 ”| 120W/135W/160W
65 ”| 160W/165W/190W
75 ”| 185W/230W/250W/260W

LIFE TIME : 60,000 Hrs

Manufactured under license from Dolby Laboratories. Dolby,Dolby Audio, and the double-D symbol are trademarks of Dolby Laboratories Licensing Corporation.

WARNING
Never place a television set in an unstable location. A television set may fall, causing serious personal injury or death. Many injuries, particularly to children, can be avoided by taking simple precautions such as:

1. Using cabinets or stands recommended by the manufacturer of the television set.
2. Only using furniture that can safely support the television set.
3. Ensuring the television set is not overhanging the edge of the supporting furniture.
4. Not placing the television set on tall furniture (for example, cupboards or bookcases).without anchoring both the furniture and the television set to a suitable support.
5. Not placing the television set on cloth or other materials that may be located between the television set and supporting furniture,
6. Educating children about the dangers of climbing on furniture to reach the television set or its controls.

If your existing television set is being retained and relocated, the same considerations as above should be applied.

Based on legislative decree no. 49 dated 14th March, 2014 “Execution of Directive 2012/19/UE about electrical and electronic equipment waste (RAEE)” This marking indicates that this product should not be disposed with other household wastes, but it should be disposed separately from other wastes. Therefore, the user should bring the product with all essential components to recycling centers for electrical and electronic wastes, or return to retailer before to buy a new product as equivalent type, in the ratio of 1 to 1, or 1 to O for products that have larger side lesser of 25cm. Correct disposal of your old appliance will help to prevent potential damage to the environment and to human health and support materials recycling. The unlawful disposal of the product should involve for users’ administrative sanctions based on Legislative Decree no. 49 dated 14th March, 2014.

Correct disposal of the batteries in this product
(Applicable in countries with separate collection systems)
This marking on battery, manual or packaging indicates that the batteries in this product should not be disposed of with other household waste at the end of their working life. Where marked, the chemical symbols Hg, Cd or Pb indicate that the battery contains mercury, cadmium or lead above the reference levels in EC Directive 2006/66. If batteries are not properly
disposed of, these substances can cause harm to human health or the environment.
To protect natural resources and to promote material reuse, please separate batteries from other types of waste and recycle them through your local, free battery return system.

CAUTION: To prevent possible hearing damage, do not listen at high volume levels for long periods.

Environmental Considerations

• Operating Temperature: 5 °C -35°C (41°F-95°F)
• Operating Humidity: 20% -75%, non-condensing
• Storage Temperature: -15 °c -45°C (5°F-113°F)
• Storage Humidity: 10% -90%, non-condensing
• BT max transmitter power: 100mW at 2.4GHz – 2.4835GHz
• Wi-Fi max transmitter power: 100mW at 2.4GHz-2.4835GHz

SUGGESTION
To make it more convenient for base installation and to avoid any risk of scratches and damage, we advise you using the type of PH2 screwdriver.

References

• TECH.DE
• Jay-tech GmbH - Small products for a great world

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>