TigerStop 2017 Chop Saw Support Installation Guide
- June 27, 2024
- TigerStop
Table of Contents
2017 Chop Saw Support
“`html
Specifications:
- Model: Chop Saw Support Mk1
- Release Date: 1 February 2017
- Components Included:
- x2 Side Panel
- x2 Strut
- x2 L Bracket
- x2 Table Legs
- x4 Table Leg Brackets
- x8 Binder Rings
- Hardware Pack
- Table Leg Hardware Pack
Product Usage Instructions:
Safety First!
Before operating the Chop Saw Support, it is crucial to read and
understand all safety warnings provided in the user manual. Safety
should always be a top priority when using this product.
Installation:
Installation of the Chop Saw Support should only be carried out
by individuals trained in the safe design and installation of
automation products. Ensure compliance with all safety regulations
and guidelines during installation. Consult with a qualified safety
engineer for recommendations.
Operation:
When operating the Chop Saw Support, keep hands and loose
clothing clear of moving parts to prevent injuries. Do not operate
the equipment without proper safety guards in place. Ensure
operators wear appropriate eye and ear protection.
Maintenance:
Do not attempt to open the motor compartment or controller
keypad as it contains potentially fatal amperage. Disconnect power
before servicing and do not tamper with any internal
components.
Frequently Asked Questions (FAQ):
Q: Can I operate the Chop Saw Support without proper safety
guards?
A: No, it is essential to always operate the Chop Saw Support
with all necessary safety guards in place to prevent injuries.
Q: What type of extension cords should be used with the Chop
Saw Support?
A: Use only 3-wire extension cords with 3-prong grounding type
plugs and 3-pole receptacles for 120VAC. For 3-phase, use 5-wire
cords and plugs.
Q: Can I open the motor compartment for maintenance?
A: No, the motor compartment contains potentially fatal
amperage. Do not open it; always disconnect power before
servicing.
“`
Installation Guide
2017 TigerStop, LLC®
Chop Saw Support
1 February 2017 Mk1
x2 Side Panel x2 Strut
x2 “L” Bracket
x2 Table Legs
x4 Table Leg Brackets
x8 Binder Rings
Hardware Pack
Table Leg Hardware Pack
2
Safety First!
IMPORTANT SAFETY INFORMATION. READ ALL WARNINGS BEFORE OPERATING THIS PRODUCT.
GENERAL WARNINGS
WARNING: Installation of your TigerStop Product must be done by a person
trained in the safe design and installation of automation products, and in the
safe operation of power equipment. Ensure that such installation meets all
legally required safety requirements and guidelines, and that proper guarding
and safety devices are provided on all sides of the equipment to preclude
unintended access during operation. Consult with and follow the
recommendations of a qualified safety engineer.
WARNING: TigerStop Products are components intended for use in conjunction
with potentially dangerous machinery. The use of TigerStop Products does not
make other machinery safe. TigerStop Products are not intended to substitute,
in any manner, for safe operating practices in general, or for safety features
present in other machines designed to make those machines as safe as possible.
TIGERSTOP PRODUCTS, IF USED OR INSTALLED IMPROPERLY, MAY CAUSE PERSONAL INJURY
OR DEATH AND SHOULD ONLY BE OPERATED BY PERSONS TRAINED IN THEIR SAFE
OPERATING PROCEDURES. Illustrations of TigerStop Products in use do not show,
and are not intended to show, all safety features and practices necessary for
their safe operation.
INSTALLATION WARNINGS
WARNING: TigerStop Products must be installed in accordance with all local, state, and federal regulations. Only personnel properly trained in the safe design and installation of automation machinery and related power equipment should install TigerStop Products onto other equipment, to ensure a safe and proper work station. TigerStop Products should not be operated without proper training, both in the operation of TigerStop Products, and in the operation of related equipment.
IMPORTANT CAUTION: The motor box (compartment) contains DC voltage with potentially FATAL amperage. NEVER attempt any unauthorized actions inside the motor box.
WARNING: Using a TigerStop interconnect does not relieve you of the
responsibility for making sure that your saw or other tool has all the
necessary safety equipment in place. All installations must meet all legally
required safety requirements and guidelines. Installation and training should
be done following the recommendations of a qualified safety engineer.
INTERCONNECTS
OPERATION
DANGER: This machine can start, move and stop automatically. Keep hands and loose clothing clear of moving parts while operating. Moving parts can crush and cut. When used with a saw or other cutting equipment, bodily injury and death may result if operated without safety guards on all machines. Do not operate with guards removed. Operators must wear adequate eye and ear protection.
DANGER! Don’t get pinched by the push feeder. Keep your hands away when in
motion!
3
IMPORTANT SAFETY INFORMATION. READ ALL WARNINGS BEFORE OPERATING THIS PRODUCT.
Keep the work area clean and well lighted to avoid accidental injury.
Do not use TigerStop machines in a dangerous environment. Using power tools in
damp or wet locations or in rain can cause shock or electrocution.
Do not operate near flammable liquids or in gaseous or explosive atmospheres!
Wear proper apparel, no loose clothes, long hair or jewelry which could get
pulled into moving machinery or materials. Wear non slip footwear, safety
glasses, ear protection and a dust mask.
Use only 3- wire extension cords that have 3-prong grounding type plugs and
3-pole receptacles that accept the tools plug for 120VAC. Use only 5-wire
cords and plugs when using 3 phase.
Do not open motor compartment or controller keypad. DC Voltage with
potentially FATAL amperage! Disconnect power before servicing. No user-
serviceable parts inside.
DO NOT operate this or any machine under the influence of drugs or alcohol!
No one should operate this machine except for fully qualified personnel. Read
the manual!
4
Chop Saw Support Installation
WARNING! Read all instructions before performing any installation! NEVER power
up system while motor box is open! ALWAYS lock out/tag out TigerStop machinery
before installing!
WARNING!
Chop Saw Support Anatomy Strut
“L” Bracket
Side Panel Extra Table Leg Kits
Assemble TigerStop Tables The Chop Saw Support attaches to a TigerStop table
system. Assemble your TigerStop tables before installing the Chop Saw Support.
Note: For more information about TigerStop tables, please see the TigerStop
Feed Table Installation Guide or contact TigerStop Customer Service.
1
Assemble Extra Leg Kits
Note: The tab on the table leg foot goes to the back of the table.
2
Existing Table
Installed Extra Leg Kits
Measure Saw Width and Cut Struts
Existing Table
WARNING!
BE CAREFUL when trimming the Chop Saw Support struts. Always read and follow all tool manufacturers warnings and instructions.
CUT 3
Install Side Panels Install “L” Brackets and Struts
FRONT 4
BACK
Install Saw and Adjust 5
6
7
FIND US ONLINE AT
www.tigerstop.com
12909 NE 95th Strtee Vancouver, WA 98682-2426
1.360.254.0661 sales@tigerstop.com
TigerStop B.V. Holland 31 546 575 171
info@tigerstop.nl
© 1994 2024 Precision Automation, Inc. All Rights Reserved
8
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>