Skmei Waterproof Smart Watch Model #1360 User Manual

Table of Contents

Smart Watch Model #1360

A. Time and Date setting

In normal time mode, press A key for 3 seconds to enter time setting mode and “12H” flashing
Press B key to select other items as follows:

Time and Date setting

B. Stopwatch and Split counting

Stopwatch running range: 00:00” 00 to 23:59” 59
In stopwatch mode, press C key to start stopwatch, press C key again to stop, when stop ,press A key to 00:00” 00

Stopwatch and Split counting

When the stopwatch is running, press B to switch to other display modes, and the stopwatch runs in the background.

C. Countdown Function

The countdown can be set from 1 second to 24 hours, when the countdown reaches to zero, the alarm will ring.
Press C key to Start / Stop counting, when stop counting, press A key, It will automatically return to initial setting time
When the countdown reaches to zero, the alarm sounds for about 10 seconds, press any key to stop ring; When the ring stops, it will automatically return to initial setting time
Time setting: In countdown mode, press A key for 3 seconds and “Hour” flashing, Press B key to select the following item

Countdown Function

D. Alarm Function

Alarm Function 1

In relative mode，press A key to turn on / turn off the function
In alarm mode, Press A key for 3 seconds, “Hour” flashing, press B key to select setting as follows:

Alarm Function 2

Press C/D key to adjust the flashing item
Press A to confirm and then return to the alarm mode.
In alarm and snooze mode, press A key for 3 seconds, “Hour” flashing, press B key to select setting as follows:

Alarm Function 3

Press C/D key to adjust the flashing item
Press A key to confirm and then return to snooze mode.
Snooze alarm will ring again for 7 times after 5 minutes, the alarm can be stopped by pressing any key.
Alarm does not have snooze function, but snooze have snooze alarm function
After the Hourly chime alarm is on ,it will ring at every hour

E. Dual time mode

In dual time mode, press A key for 3 seconds, “Hour” flashing, Press B key to select setting

Dual time mode

F. Pedometer mode

Pedometer mode

Pedometer mode 1

Metric System/Imperial System: The default item is metric, press C key convert Metric System/Imperial system
Setting weight: The default value is 50kg(20IN), adjustable range: 20-200kg/44-440Lb
Setting step distance: Default step distance is 70cm (154LB), adjustable range: 30-200cm/12-79in
Press C key to increase the flashing item, Press D key to decrease the flashing item, The metric /imperial system haven’t fast increase function.
In setting mode, Press A key to return to pedometer mode

G. Pedometer Query Function

In pedometer query mode, press C key to inquiry the historical data within 7 days, press A key to inquiry a certain day’s data.

Pedometer Query Function

H. Compass Function

In compass mode, press A key for 3 seconds to enter Compass Correction 1, at this time, turn the watch for 3 circles and press C key to appear ”OK”, and then enter Compass Correction 2 reverse turn the watch for 3 circles to appear “OK”，correction completed
Press A key for 3 seconds to enter compass correction mode

Compass Function

In compass correction mode 1, arrow point to the direction of 6, press C and then appear “OK” to enter compass correction mode 2
In compass correction mode 2, arrow point to the direction of 12, press C and then appear “OK” to finish correction.
Magnetic declination correction

Compass Function 1