FIOCCO Elevated Dog Cot Instruction Manual

Table of Contents

FIOCCO-Elevated-Dog-Cot-product

Specifications:

Product Name: FIOCCO Elevated Dog Cot
Dimensions:
- Leg Length: 7
- Short Side Bar-A: 11.6′ (Quantity: 2)
- Short Side Bar-B: 11.6′ (Quantity: 2)
- Long Side Bar-C: 14.8′ (Quantity: 2)
- Long Side Bar-D: 14.8′ (Quantity: 2)
Includes: Connectors (Quantity: 4), Rubber Foot Covers (Quantity: 4), Pet Bed Fabric (Quantity: 1)
No additional tools are needed for the setup
Approximate setup time: 10 minutes

Step 1: Preparing for Installation
Identify the different bars and components included in the package.
Step 2: Assembling Short Side Bars
Connect Short Side Bar-A with Short Side Bar-B using the provided connectors.
Step 3: Attaching Long Side Bars
Attach Long Side Bar-C to Long Side Bar-D to form the frame of the cot.
Step 4: Connecting All Bars
Connect the assembled short and long side bars according to the instructions (Bar A connects with Bar B, and Bar C connects with Bar D).
Step 5: Adding Rubber Foot Covers
Place rubber foot covers on the legs of the cot to prevent slipping and protect the floors.
Step 6: Installing Pet Bed Fabric
Secure the pet bed fabric onto the frame using the provided Velcro straps.

Tips:

If you encounter difficulty tightening or disassembling, try rotating and pulling the bars simultaneously.
Prioritize attention to the connectors’ dimensions and orientation to ensure proper assembly.
Avoid closing the Velcro prematurely during installation to prevent complications.

Frequently Asked Questions (FAQ):

Q: Do I need any additional tools for assembling the Elevated Dog Cot?
A: No, this product can be assembled without the need for any extra tools.
Q: How long does it take to set up the dog cot?
A: The approximate setup time is around 10 minutes.

$FIOCCO-Elevated-Dog-Cot-fig- $1$$

NO ADDITIONAL TOOLS NEEDED

If you have problems tightening/disassembling during installation, you can try rotating and pulling the bar at the same time to solve this problem.
Pay attention to the connector, its length and width are the same length (there is no cylinder in the hole), and its height is longer (there are cylinders in the hole).
Make sure that the Velcro is never closed during the installation process, otherwise you may encounter some trouble.
Pay attention to the difference between bars, which need to be connected, we have sorted them for you(Bar A connects with Bar B, and Bar C connects with Bar D).