ZKTeco VS3070 2D Wireless Barcode Scanner with Base User Manual
- June 12, 2024
- ZKTECO
Table of Contents
2D Wireless Barcode Scanner with Base
Model number: VS3070
User manual
. Product introduction
- The product has excellent decoding ability, which can quickly and accurately read the poor printing quality barcode.
- It has good anti-earthquake, anti-fall and dust-proof protection
- It has large capacity battery, charging 4 hours and used for a week in regular working.
- The core parts of this product are: Barcode Scanner, Charging Base, Cable, Data Receiver……
- The following is the description of the device:
1. LED indicator
2. Scanning key
3. Scanning window
4. Charging base
5. Wireless data receiver
6. Barcode Scanner
7. Physical Dimension,
. Product Operating Method
A. Charging
- Connect the charging base to USB power port.
- Place Barcode Scanner on charging base, and check the metal contacts between it connected well.
- LED light will be red in charging, and it will be off after fully charged.
B. Scanning Barcode Method
- Connect Data receiver to PC.
-
Scan the following pairing setting barcode in turn to make barcode scanner connect data receiver, please finish this operations within 20 seconds after step 1.
2.4G|
@Y990703
LED1
|
@Y990100
- When you hear the sound of the beep means paired successful.
- The scanned barcode data will be transmitted to the PC cursor displaying.
C. LED indicator description
The LED1 light blue:
Barcode scanning indicator, and blink once when barcode was scanned
successfully
The LED2 light blue:
The connection indicator is steady on.
The Red LED3:
Keeps on when charging, and it off means fully charged or the charging base
doesn’t connected the charging cable.
Blue LED1 fast blinking:
It means the barcode scanner in 2.4G pairing state.
. Example Barcode
Scan the following barcode to test the Barcode Scanner or check what kind of barcode the scanner supported in its specification file.
| Code39 Full ASCII | Code 39 Regular |
|---|---|
| Code 93 | Code 93i |
| Code 128 | Datalogic 2-of-5 (China Post) |
| DUN-14 (Interleaved 2 of 5) | EAN-8(UCC-8/JAN-8) |
| 
EAN-8| EAN-8
|
EAN-13 (JAN-13/UCC-13)| EAN-13
|
EAN-13| GS1-128(EAN-128,UCC-128,UCC/EAN-128)
|
GS1 DataBar(RSS) (GS1 Databar Omnidirectional)| GS1 Databar Limited
|
GS1 Databar Expanded| IATA 2-of-5(Standard 2-of-5)
|
Industrial 2-of-5| Interleaved 2-of-5(1-2/5,ITF)
|
ISBN-13(Booklland,ISBN)| ITF-14 (UCC-14)
ISBN 978-0-618-26030-0
|
ISS Code 128
Español / Français
Matrix 2-of-5| MSI Plessey(Modified Plessey, MSI)
|
NEC 2-of-5| NW-7(2 of 7 Code, AAmes Code, Codabar, Monarch, USD–4, USS
Codabar)
|
OPC (Optical Product Code, VCA)| Telepen
|
UK Plessey (Plessey Code)| UPC-A (UCC-12)
|
UPC-A| UPC-A
|
UPC-E| UPC-E
|
UPC-E| Code 11 (USD-8)
|
ISBT 128| ISBN
|
ISBN 978-123456789-7
ISSN| Trioptic
ISSN 1101-5438
|
Pharma| Korea Post
$12345678$
|
QR| Micro QR
12345678
|
12345678
PDF417| Micro PDF 417
12345678
|
12345678
PdF427 Truncated(Compact PDF 417)|
12345678
|
Data Matrix| Data Matrix
12345678
|
12345678
MaxiCode| Aztec
|
12345678
Hanxin Code(Chinese Sensible)| GM(Grid Matrix)
12345678
|
12345678
Codablock A| Codablock F
Codablock A
|
12345678
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
Warning: changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment
The devices has been evaluated to meet general RF exposure requirement, the device can be used in portable exposure condition without restriction