denver SWC-185 Bluetooth Amoled Smart Watch Instruction Manual
- June 28, 2024
- Denver
Table of Contents
denver SWC-185 Bluetooth Amoled Smart Watch
Safety information
Please read the safety instructions carefully before using the product for the first time and keep the instructions for future reference.
- This product is not a toy. Keep it out of reach of children.
- Warning: This product includes lithium polymer battery.
- Keep product out of the reach of children and pets to avoid chewing and swallowing.
- Product operating and storage temperature is from 0 degree Celsius to 40 degrees Celsius. Under and over this temperature might affect the function.
- Never open the product. Repairs or service should only be performed by qualified personnel.
- Please remove the Smart watch in case of any leakage or excessive heat from the product to avoid burns or rash.
- Only charge with the supplied USB cable.
- Using other accessories than the ones delivered with the product can cause abnormal functionality.
- Bluetooth wireless technology operates within a range of about 10 m (30 feet). The maximum communication distance may vary depending on the presence of obstacles (people, metal objects, walls, etc.) or the electromagnetic environment.
- Microwaves emitting from a Bluetooth device may affect the operation of electronic medical devices.
Denver A/S reserves the rights for print errors
Denver A/S cannot be held responsible for any technical or typographical
errors and reserves the right to make changes to the product and manuals
without prior notice. If you detect any inaccuracies or omissions, please
inform us at the address on the back cover.
Intended Use
This smartwatch is intended for monitoring fitness-related metrics such as
heart rate, blood oxygen, distance walked or run, calorie consumption and
quality of sleep. Data measured should not be used for any medical,
ambulatory, or dietary reference. Charging
Your Smartwatch
Make sure the charging pins on the charging cable fit correctly onto the
charging contacts at the back of your Smartwatch, then connect the other end
to a power source. Make sure to fully charge the watch before first use. It
will take approximately 3 hours to fully charge.
Download App
Search for the “Denver Smart Life Plus” App in the Apple Store or Google Play
or scan the following QR code to install.
How to pair and disconnect watch
- Open the “Denver Smart Life Plus” app and set your profile. Then tap “Connect to Smartwatch” in settings and choose your smartwatch “SWC-185” to connect.
- To disconnect your smartwatch, please go to the app settings and tap “Disconnect Smartwatch”. For iPhone, you also need go to “Bluetooth” in your iPhone Settings to “Forget This Device”.
Warning
- Lithium battery inside!
- Do not try to open the product!
- Do not expose to heat, water, moisture or direct sunlight!
- Only charge with the original charger supplied with this product!
Please notice – All products are subject to change without any notice. We
take reservations for errors and omissions in the manual.
ALL RIGHTS RESERVED, COPYRIGHT DENVER A/S
Electric and electronic equipment and included batteries contains materials,
components and substances that can be hazardous to your health and the
environment, if the waste material (discarded electric and electronic
equipment and batteries) is not handled correctly.
Electric and electronic equipment and batteries is marked with the crossed out
trash can symbol, seen above. This symbol signifies that electric and
electronic equipment and batteries should not be disposed of with other
household waste, but should be disposed of separately.
As the end user it is important that you submit your used batteries to the
appropriate and designated facility. In this manner you make sure that the
batteries are recycled in accordance with legislature and will not harm the
environment.
All cities have established collection points, where electric and electronic equipment and batteries can either be submitted free of charge at recycling stations and other collection sites or be collected from the households. Additional information is available at the technical department of your city.
Hereby, Denver A/S declares that the radio equipment type SWC-185 is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: denver.eu and then click the search ICON on topline of website. Write model number: SWC-185.
Now enter product page, and RED directive is found under downloads/other
downloads. Operating Frequency Range: 2.402~2.480 GHz
Max Output Power: -3.05 dBm
DENVER A/S
Omega 5A, Soeften
DK-8382 Hinnerup
Denmark
www.facebook.com/denver.eu
Nordics
Headquarter
Denver A/S
Omega 5A, Soeften
DK-8382 Hinnerup
Denmark
Phone: +45 86 22 61 00
(Push “1” for support)
E-Mail
For technical questions, please write to:
support.hq@denver.eu
For all other questions please write To:
contact.hq@denver.eu
Germany
Denver Germany GmbH Service Max-Emanuel-Str. 4
94036 Passau
Phone: +49 851 379 369 40
E-Mail
support.de@denver.eu
Fairfixx GmbH
Repair and service
Rudolf-Diesel-Str. 3 TOR 2
53859 Niederkassel
(for TV, E-Mobility/Hoverboards/ Balanceboards, Smartphones & Tablets)
Tel.: +49 851 379 369 69
E-Mail: denver@fairfixx.de
Benelux
DENVER BENELUX B.V. Barwoutswaarder 13C+D
3449 HE Woerden
The Netherlands
Phone: 0900-3437623
E-Mail: support.nl@denver.eu
Austria
Lurf Premium Service GmbH Deutschstrasse 1
1230 Wien
Phone: +43 1 904 3085
E-Mail: denver@lurfservice.at
Spain/Portugal
DENVER SPAIN S.A
Ronda Augustes y Louis Lumiere, nº 23 – nave 16
Parque Tecnológico
46980 PATERNA
Valencia (Spain)
Spain
Phone: +34 960 046 883
Mail: support.es@denver.eu
Portugal:
Phone: +35 1255 240 294
E-Mail: denver.service@satfiel.com
Denver.eu
facebook.com/denver.eu
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>