denver BTH235B Bluetooth Ear Headphones Over Instruction Manual
- March 10, 2024
- Denver
Table of Contents
denver BTH235B Bluetooth Ear Headphones Over Instruction Manual
Safety information
Please read the safety instructions carefully before using the product for the first time and keep the instructions for future reference.
- This product is not a toy. Keep it out of reach of children.
- Warning: This product includes lithium polymer batteries.
- Keep product out of the reach of children and pets to avoid chewing and swallowing.
- Product operating and storage temperature is from 0 degree Celsius to 40 degree Celsius. Under and over this temperature might affect the function.
- Never open the product. Touching the inside electrics can cause electric shock. Repairs or service should only be performed by qualified personnel.
- Do not expose to heat, water, moisture, direct sunlight!
- Please remove the earphones in case of any leakage or excessive heat from the product to avoid burns or rash.
- Please protect your ears against loud volume. Loud volume can damage your ears and risk in hearing loss.
- Bluetooth wireless technology operates within a range of about 10 m (30 feet). The maximum communication distance may vary depending on the presence of obstacles (people, metal objects, walls, etc.) or the electromagnetic environment.
- Microwaves emitting from a Bluetooth device may affect the operation of electronic medical devices.
- The unit is not waterproof. If water or foreign objects enter the unit, it may result in fire or electric shock. If water or a foreign object enters the unit, stop use immediately
Charge It
NOTE:If the headphone is not used within 5 minutes.the headphones will
automatically turn off to save battery.
- On the right earcup,carefuIIy plug the Type-C cable into Type-C charging port. and connect the other end of the cable to either a computer USB port or to a USB-compatible car or wall charger.
- Solid red LED light will appear to indicate when the headphone is charging.
- When charging is complete, the LED light will turn Blue.
- Charging time is approximately 2 hours.
Turn It On/Off
- Press & hold the power button on the right side of the headphone for about 3 seconds until the LED indicator light turns on.
- Press & hold the power button again for 4 seconds until the LED light turns off.
Pair & Connect With New Device
- Power on the wireless bluetooth headphone(refer to the “Turn It On” section).
- To pair the headphone with a new device,the Red and blue LED light blink to indicate it isready to be paired with your device.
- On your Bluetooth-enabled smartphone,tabIet or media player,navigate to the Bluetooth settings menu,turn on the Bluetooth feature,and search for new devices After a few seconds you will see “DENVER BTH-235B” listed.
- Tap this modei to select it.Solid blue LED light indicate your device has successfully paired.
- With your previously paired device’s Bluetooth turned on and in range,The headphone will automatically reconnect to the last Bluetooth device it was connected to.
NOTE: If the headphone is not used within 5 minutes.the headphones will automatically turn off to save battery
Play
- Connect your device to the headphone via Bluetooth (refer to the” Pair & Connect” section)
- Open your favorite music app and press play.
- Control the music,track & volume from your device, or control the music & volume. Press the Power button once to play/pause music & answer calls,press it twice to redial the last number called on your phone,and press & hold it to reject an incoming call.
- All audio,including music,games, videos and notifications will be routed through the headphone.
Function
- Press + area(refer to product Diagram) to nex track.
- Press – area(refer to product Diagram) to previous track.
- Press & Hold + area(refer to product Diagram) to turn up the volume.
- Press & Hold – area(refer to product Diagram) to turn down the volume.
Troubleshooting
- No power
- Recharge your wireless bluetooth headphone using the Type-C cable.
- Music is not playing over Bluetooth
- Make sure your Bluetooth device has A2DP profile. Check if both devices are paired and connected over Bluetooth.Restart the headphone to reconnect your Bluetooth device.
- Bluetooth device will not reconnect with the headphone
- Navigate to your Bluetooth settings menu on your Bluetooth device,tap “DENVER BTH-235B” , and select “Forget” .
- Now follow the steps to pair your device again.Or, press & hold the power button on the headphone (while powered on) to disconnect the headphones from any connected devices. Then follow the steps to reconnect your device.
- For safety reasons,please do not charge the headphones while using them.
Product Diagram
Warning!
- Lithium battery inside!
- Do not try to open the product!
- Do not expose to heat, water, moisture or direct sunlight!
- Only charge with the original cable supplied with this product!
Please notice-All products are subject to change without any notice. We take reservations for errors and omissions in the manual.
ALL RIGHTS RESERVED, COPYRIGHT DENVER A/S
Electric and electronic equipment and included batteries contains materials,
components and substances that can be hazardous to your health and the
environment, if the waste material (discarded electric and electronic
equipment and batteries) is not handled correctly.
Electric and electronic equipment and batteries is marked with the crossed out
trash can symbol, seen below. This symbol signifies that electric and
electronic equipment and batteries should not be disposed of with other
household waste, but should be disposed of separately.
As the end user it is important that you submit your used batteries to the
approriate and designated facility. In this manner you make sure that the
batteries are recycled in accordance with legislature and will not harm the
environment. All cities have established collection points, where electric and
electronic equipment and batteries can either be submitted free of charge at
recycling stations and other collection sites, or be collected from the
households. Additional information is available at the technical department of
your city.
Hereby, DENVER A/S declares that the radio equipment type BTH-235B is in
compliance with Directive 2014/53/EU. The full text of the EU declaration of
conformity is available at the following internet address: www.denver.eu and
then click the search ICON on topline of website. Write modelnumber: BTH-235B
Now enter product page, and red directive is found under downloads/other
downloads. Operating Frequency Range2402-2480MHz: Max Output Power:0.5mW
Warning Lithium battery inside