denver MCR-50MK4 USB Turntable Wood Instruction Manual

denver MCR-50MK4 USB Turntable Wood Instruction Manual

Safety information

Please read the safety instructions carefully before using the product for the first tirre and keep the instructions for future reference.

1. This product is not a toy. Keep it out of reach of children.

2. Keep product out of the reach of children and pets to avoid chewing and swallowing.

3. Product operating and storage terrperature is fromo degree Celsius to 40 degree
   Celsius. Under and over this terrperature night affect the function.

4. Never use old and new batteries or different types of batteries together in rerTDte control. Rerrove the batteries when you are not using the systemfor a longer period of tirre. Check the polarity(+/-) of the batteries when inserting them in the product. Wrong positioning can cause an explosion. Batteries are not included.

5. Never open the product. Touching the inside electrics can cause electric shock. Repairs or service should only be perforrred by qualified personnel.6

6. Do not expose to heat, water, rroisture, direct sunlight!

7. Please protect your ears against loud volurre. Loud volurre can darrege your ears and risk in hearing loss.

8. The unit is not waterproof. If water or foreign objects enter the unit, it rray result in fire or electric shock. If water or a foreign object enters the unit, stop use irrmadiately.

9. Do not use non original accessories together with the product as this can rreke the product functionality abnorrrel.

CAUTION
TO PREVENT FIRE OR SHOCK HAZARD,DO NOT USE THIS PLUG WITH AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE.TO PREVENT FIRE OR SHOCK HAZARD,DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MO I STU RE.

IMPORTANT SAFETY INSTRUCTIONS

1. Read,keep and follow all these instructions in this manual.
2. Clean only with dry cloth.
3. Do not block any ventilation openings.Install in accordance with the rranufacturer’s instructions.
4. Do not install near any heat sources such as radiators, heat registers.stoves, or other apparatus(including arrplifiers) that produce heat.
5. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles.and point where they exit from the apparatus.
6. Unplug this apparatus during lightning storrrs or when unused for long periods of time.
7. Refer all servicing to qualified service personnel.Servicing is required when the apparatus has been darraged in any way,such as power-supply cord or plug is darraged,liquid has been spilled or objects have fallen into the apparatus.the apparatus has been exposed to rain or rroisture, does not operate norrrally, or has been dropped.
8. This appliance shall not be exposed to dripping or splashing water and no object filled with liquids such as vases shall be placed on the apparatus.
9. Do not overload wall outlet.
10. Operate controls and buttons as described in the rranual.
11. Store your CDs, cassettes in a cool area to avoid darrage from heat.
12. When rroving the set,be sure to first disconnect the power cord.

CLEANING THE CABINET

If the wooden cabinet becomes dusty please wipe it with a soft, non-abrasive dust cloth. Also don’t use water or spray cleaners as this can darrage the cabinet and the plastic/metal parts of the unit.

TECHNICAL SPECIFICATION

• Turntable speed: 33/4St78 RPM {Disc size 17.S/25/30cni
• CD can play CD/CD-R/CD-RW/MP3
• USB can play MP3
• Cassette: C60 & C90 {Cl20 cassette is not recorrrrended)
• Output power: 2x25W

PREPARATION FOR USE

IMPORTANT: RAISING AN LOWERING THE  TURNTABLE LID
To open the lid. Raise it as far as it can go until the lid support bracket locks in the position.
To close the lid. Pull forward the lid support bracket to release and then gently lower the lid.
TO AVOID DAMAGING THE CABINET OR THE LID, NEVER FORCE THE LID CLOSED. ALWAYS RAISE THE LID TO RELEASE THE LID SUPPORT BRACKET.

LOCATIONS OF CONTROLS AND INDICATORS

REMOTE BATTERY INSTALLATION
The infrared rerrote control requires 2
PCS UM-4 R03, AAA (3V) Battery
(excluded)
Note l: All buttons on the rerrote control have the sarre function as the buttons on the unit. The rerrote control is just used for CD/MP3 and USB rrode.
Note 2: Long pressing PLAY/PAUSE on ren-ote control for 2 seconds will change between CD and USB.
Note 3: Long pressing DELETE on rerrote control for 2 tirres will delete file in USB rrode.

27. CASSETTE MECHANISM/TAPE STOP / EJ

28. FM ANTENNA
29. AC CORD
30. ON/OFF SWITCH
31. ADAPTOR
32. TURNTABLE PAUSE SWITCH
33. PICK-UP HOLDER
34. Auto-stop ON/OFF
35. 33/45/78 RPM SPEED SELECTOR
36. Tone needle
37. TURNTABLE
38. LINE OUT

INFORMATION
The AM antenna is inside the cabinet. IF AM reception is unsatisfactory try re-positioning  the cabinet slightly until the internal antenna is picking up the strongest signal.
The FM wire is located back of the cabinet. If necessary adjust the position and direction of this antenna until you find the position that provides the best reception.

44. Turntable
45. 45 rpm adapter
46. Cue lever
47. Auto Stop control
48. Speed selector {33/45/78 rpm)
49. Tone arm lock
50. Tone armwith stylus

POWER ON/OFF

1. Press POWER to turn the system on. The power indicator lights up.
2. Press the function selector buttons {AM/FM/CD/USB/TAPE/PHONO/AUX IN) to select the desired function.
3. Start to adjust the volun-e by using the volun-e control button.
4. When finished listening press POWER again to turn off the system The power indicator goes off.
   Remark: The unit is comply with ERP2, the unit will turn to Standby nude if there is no operation on the unit after 15 nins, please press POWER button 2 tin-es if you want to re-start the unit.

RADIO OPERATION

1. Press POWER to turn the system on.
2. Make sure you connected the FM antenna cable on the rear side of the unit. Press
3. MW button for AM or UKW button for FM radio.
4. Rotate the TUNING control to tune the desired radio station, the FM ST/REC indicator will light.

CD OPERATION

PLAYING CASSETTE

Note: Before inserting the tape in the player be sure that there is no excess slack in the cassette that could jam the mechanism

1. Press POWER to turn the system on.
2. Press TAPE button to enter TAPE nude.
3. Insert your cassette into the slot located on the right side of the cabinet, as shown in the illustration, with the side you wish to play facing up and the open end on the right side.

4. Cassette playback begins as soon as the tape is inserted. Adjust the VOLUME control to the desired level.

PLAYING VINYLS RECORDS

The system includes a full-size, 3 speed, belt-drive turntable. You can play 33, 45 and 78rpm records.

1. Press POWER to turn the system on.
2. Press the PHO NO button to enter the PH ONO mode.
3. Make sure you have removed the stylus cover from the stylus and have released the tone arm lock that secured the tone arm to the tone arm rest.
4. Set the turntable speed selector to appropriate speed 33, 45 or 78rpm If you are playing 45 rpmsingles, place the 45rpmadapter on the centre spindle.
5. Place your record on the the centre spindle.
6. Raise the cue lever to lift the tone arm of its rest. Move the tone arm to the edge of the record. The turntable starts autorratically. Use the cue lever to gently lower the tone arm onto the record.
7. Adjust the volurre control to the desired level.
8. When the tone arm reaches the end of the record it autorratically stops.
9. Press POWER again to turn the system off. The POWER indicator goes OFF.

Note: Do not turn or stop the turntable rranually. Moving or jarring the turntable without securing the tone arm clamp could result in darrage to the tone arm

AUX IN OPERATION

Connect the audio system into the AUX IN jack on the rear panel, Press the PHONO/AUX IN button. Start playing fromthe connected device.

USB OPERATION

1. Press the CD/USB button first and the FUNCTION button to enter USB mode. The ·—· and USB icon will be shown.
2. Insert a USB flash device into the USB socket.
3. PLAY/PAUSE, DN/UP and stop functions are the same as CD functions.

Note: You may press the FUNCTION on the panel or long press PLAY/PAUSE button on the remote control for 2 seconds to change the playing mode between CD and USB.

PLAYING IN MP3 MODE (CD/USB)

1. Press PLAY/PAUSE button to start or pause playback selected track.
2. While playing the song, the song number and folder number of the selected track will be shown in the display.
3. You can stop the playback at any tin-e by pressing the STOP button.

TRACK SKIP AND HIGH SPEED TRACK  SEARCH IN CD/USB MODE

USB RECORDING

1. CD recording
   Insert USB flash drive into the USB socket. Then press CD/USB button. Place CD into the CD drawer and play the track which will be recorded. Press RECORD button once. It will show REC-ONE in display. Press RECORD button again to start recording one track.
   To record all tracks, press RECORD button once, then press NEXT button and it will show” REC-ALL” in display. Then press RECORD button to start the recording.
   NOTE: Recording will fail if pressing STOP button during recording

2. MP3 DISC recording
   Insert USB flash drive into the USB socket. Then press CD/USB button. Place CD with MP3 files into the CD drawer and play the MP3 track which will be recorded. Press RECORD button twice to start recording. If all MP3 files is played, Then all tracks will be recorded.
   NOTE: Recording will fail if pressing STOP button during recording

3. Cassette recording
   Insert USB flash drive into the USB socket. Then press TAPE button. Place the cassette into the socket. Play cassette. Press RECORD button twice to start recording. Press STOP button to stop recording.

4. Vinyl recording
   Insert USB flash drive into the USB socket. Then press PHONO/AUX IN button. Play the vinyl and press RECORD button twice to start recording. Press STOP button to stop recording.

5. AUX IN recording

Insert USB flash drive into the USB socket. Connect the external audio device into the  AUX jack on the rear panel. Then press PHONO/AUX IN button and play audio and press  RECORD button twice to start recording.

DELETE TRACKS FROM USB DISC
Press CD/USB button on the front panel or long press PLAY/PAUSE on rerrote control to select  USB mode. Select the track and press delete for 2 seconds and the track is deleted.

Bluetooth

To connect the player for the first time to a playback device,
using the Bluetooth function, you need to pair the device in advance.

1. Power on the unit and adjust the sound level.
2. Select the BT mode by using the “CB/USB” button.
3. Using a wireless device (phone, tablet, etc.), enter the pairing settings of Bluetooth devices and find a new device called “Denver MCR-50” in the list.
4. Press the pairing button on the wireless device.
5. Adjust the volume using the volume control on the player or on the wireless device.

Attention: Make sure that the tonearm is at rest. otherwise the Bluetooth function will not work.

Electric and electronic contains materials components and substances that can be hazardous to your health and the environment, if the waste material (discarded electric and electronic equipment) is not handled correctly.
Electric and electronic equipment is with the crossed out trash can symbol, seen below. This symbol signifies that electric and electronic equipment should not be disposed of with other household waste, but should be disposed of separately.
All cities have established collection points, where electric and electronic equipment can either be submitted free of charge at recycling stations and other collection sites, or be collected from the households. Additional is available at the technical department of your city.

Hereby, Denver A/S declares that the radio equipment type MCR-50MK4 is in compliance with Directive 2014/53/ElJ. The full text of the EU declaration of conformity is available at the following internet
address:

Please enter: www.denver.eu and then click the search ICON on the top line of website.Write number:
MCR-50MK4

Now enter product page and red directive is found under downloads/other downloads.
Operating Frequency Range: FM:88 -108MHz, AM:5SO-1600KHz BT Frequency: 2402MHz-2480MHz

Max Output Power: 2X25W/2X2.5W RMS
DENVER A/s
5A, Soeften
DK-8382 Hinnerup
Denmark
www.facebook.com/denver.eu

CONTACT

Read More About This Manual & Download PDF:

References

• Denver A/S

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>