dynamic BIOSENSORS RT-IC Running Buffer User Manual
- June 28, 2024
- dynamic BIOSENSORS
Table of Contents
dynamic BIOSENSORS RT-IC Running Buffer
Product Description
Order Number: BU-RB-10-1
Table 1. Contents and Storage Information
| Material | Concentration | Amount | Storage |
|---|
RT-IC Running Buffer (RB 1) (1.37 M NaCl,
26.7 mM KCl, 14.7 mM KH2PO4, 81 mM
Na2HPO4, 0.1 % Pluronic, without calcium, without magnesium; 0.2 µm sterile filtered)
| 10 x stock| 50 mL| 2-8 °C
For research use only.
This product has a limited shelf life, please see expiry date on label.
Preparation
Dilute the 50 mL complete solution 10x RT-IC Running Buffer 1 by mixing with
450 mL ultrapure water. After dilution RT-IC Running Buffer is ready for use
(137 mM NaCl, 2.67 mM KCl, 1.47 mM KH2PO4, 8.1 mM Na2HPO4, 0.01 % Pluronic,
without calcium, without magnesium).
The diluted buffer should be stored at 2-8°C.
Filter running buffer before use in heliXcyto.
Contact
Dynamic Biosensors GmbH
Perchtinger Str. 8/10
81379 Munich
Germany
Dynamic Biosensors, Inc.
300 Trade Center, Suite 1400
Woburn, MA 01801
USA
Order Information order@dynamic-biosensors.com
Technical Support support@dynamic-biosensors.com
www.dynamic-biosensors.com
Instruments and chips are engineered and manufactured in Germany.
©2024 Dynamic Biosensors GmbH | Dynamic Biosensors, Inc. All rights reserved.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>