dynamic BIOSENSORS TS-0 HeliX Test and Standby Solution User Manual
- June 10, 2024
- dynamic BIOSENSORS
Table of Contents
dynamic BIOSENSORS TS-0 HeliX Test and Standby Solution
Product Information
The TS-0 product from Dynamic Biosensors is an adapter strand kit that comes with two adapter strands (Adapter strand 1 – Ra – lfs and Adapter strand 2 – Ra – lfs) in TE401 solution. The kit is designed for in vitro use only and has a limited lifetime, which is mentioned on the label. The product has 2 spots with 2 different anchor sequences for DNA-encoded addressing and has a net charge. The solution is ready to use for biochip functionalization.
Product Usage Instructions
- Aliquot the nanolever to avoid many freeze-thaw cycles.
- Take out the required amount of adapter strands from the TE401 solution.
- Mix the adapter strands and run them on the biochip for functionalization.
- Refer to the expiry date mentioned on the label before using the product.
Note: For any order-related queries, contact order@dynamic-biosensors.com and for technical support, contact support@dynamic- biosensors.com.
Key Features
- Adapter strand 1 and Adapter strand 2 for functionalization of a heliX® Adapter Biochip Spot 1 and Spot 2
- Compatible with all switchSENSE® Adapter Biochips
- Ideal for Adapter Biochip status test and storage
- These Adapter strands 1 and 2 carry a moderately hydrophilic red dye (Ra) with a single positive net charge.
heliX® Adapter Biochip Overview
2 spots with 2 different anchor sequences for DNA-encoded addressing
Product Description
Order Number TS-0
TABLE 1 | Contents and Storage Information
| Material | Concentration | Amount | Storage |
|---|
Adapter strand 1 – Ra – lfs (in TE40 1)
Adapter strand 2 – Ra – lfs (in TE40 1)
| 100 nM each| 5 x 400 µL| -20°C
For in vitro use only.
To avoid many freeze thaw cycles please aliquot the nanolever. This product
has a limited life time, please see expiry date on label.
Preparation | MIX&RUN
- Solution is ready to use for biochip functionalization.
Contact
Dynamic Biosensors GmbH Perchtinger Str. 8/10 81379 Munich Germany
Dynamic Biosensors, Inc.
300 Trade Center, Suite 1400 Woburn, MA 01801 USA
Order Information: order@dynamic-biosensors.com
Technical Support: support@dynamic-biosensors.com
Get it on Google Play.
Download on the App Store.
switchSENSE® is a proprietary measurement technology by Dynamic Biosensors
GmbH. Instruments and biochips are engineered and manufactured in Germany.
©2023 Dynamic Biosensors GmbH | Dynamic Biosensors, Inc. All rights reserved.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>