HANECO SKYLUX EVO LED Highbay and Lowbay Installation Guide

HANECO SKYLUX EVO LED Highbay and Lowbay

Specifications

• Product Code: SKYLUX150W-EV, SKYLUX200W-EV
• Power: 100/120/150W, 100/150/170/200W
• CCT: 5000K
• Voltage/Frequency: 220-240Vac 50/60Hz
• IK/IP Rating: IK08 IP65
• Operating Temperature: –

Product Usage Instructions

Installation

1. Ensure the main power supply is switched off before starting the installation.
2. Remove the IP65 cover to access the power switch. Push inward and turn counterclockwise to remove the cover.
3. Set the desired power output.
4. Ensure to reinstall the IP65 cover securely.
5. Screw the eye bolt on top of the luminaire.
6. Install optional accessories and set the desired mounting option.
7. Mount the luminaire onto the desired location.

Mounting Options

• Ceiling mounting with hook
• Ceiling or wall mount with bracket (Not Included, available as accessories)

Motion Sensor Installation

1. Switch off the power supply.
2. Remove the IP65 cover by rotating it counterclockwise and pulling outward.
3. Align the microwave sensor with the marker as shown in the image.
4. Turn on the unit power and set the microwave sensor accordingly.

Product Dimension

• 150W: 252 units
• 200W: 290 units

Accessories (Not included)

Frequently Asked Questions (FAQ)

Q: Can I use the product outdoors?
A: Yes, the product has an IP65 rating making it suitable for outdoor use.

SKYLUXEVO
Product Code: SKYLUX150W-EV
SKYLUX200W-EV

Thank you for choosing Haneco SKYLUX EVO Highbay.
We strongly recommend that you read this manual carefully before installation.
This installation guide is suitable for SKYLUX EVO model.

WARNING

• Installation must be carried out by a licenced electrician and in accordance with these instructions and relevant Australian standards and local regulations.
• Ensure input voltage conforms within product specifications.
• Ensure wires are securely connected.
• Before switching on, ensure all wires are correctly connected.
• The warranty is void if product is not installed according to the instructions.

Note: Product technical information and specification may change over time without prior notice. For latest information, please contact our customer service or visit our website www.haneco.com.au

Product Specification

PRODUCT CODE| POWER| CCT| VOLTAGE/ FREQUENCY| IK/IP RATING| OPERATING TEMPERATURE
---|---|---|---|---|---

SKYLUX150W-EV

| 100/120/150W|

5000K

| **** 220-240Vac

50/60Hz

| IK08 IP65| -35 – 50°C
SKYLUX200W-EV| 100/150/170/200W

Installation

1. Ensure main power supply is switched off before commencing the installation.
2. Remove the IP65 cover to access the power switch. Push inward and turn counterclockwise to remove the IP65 cover as shown in the figure below.
3. Set the desired power.
4. Ensure to install the IP65 cover.
5. Screw the eye bolt on top of the luminaire.
6. Install optional accessories and desired mounting setting.
7. Install the luminaire onto the desired location.

Mounting Option

Motion Sensor Installation

1. STEP 1. Switch Off the power supply. Remove the IP65 cover by rotating it counterclockwise and pull outward.
2. STEP 2. Insert the mircowave sensor (HIGHBAY- MS : 20022281). Push downward and turn clockwise (360°) to engage the sensor. Motion sensor setting are set using a remote controller (HIGHBAY-REMOTE : 2002282).
3. STEP 3. It is correct installation when the microwave sensor are aligned with the marker as shown in image. Turn ON the unit power and set the microwave sensor suit.

Product Dimension

Accessories (Not included)

For more information www.haneco.com.au 1300 001 LED

References

• Haneco LED Lighting - Residential & Commercial Lighting | Australia

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>