SoundMAGIC T80BT ANC True Wireless Noise Canceling In Ear Headphones User Manual

**SoundMAGIC T80BT ANC True Wireless Noise Canceling In Ear Headphones User Manual

**

NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuantto part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, ther is no guarantee that interference will not oceur in a particular installation. If this equipment does cause harmful interference to radia or television reception, which can be determined by turning the equipment off and on, the user is encouraged to lry to correct the interference by one or more of the following measures:

• Reorient o relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment “This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this dovice must accept any interference received, including interference that may cause undesired operation

Packing List

1. Charging box
2. Headphones
3. User manual
4. Eartips
5. Type-C cable

FCC ID : A6B-T80BTANC
CMIT ID : XXXXXXXXXX

Technical Specification

• Technology standard :  Bluetooth 5.3
• D A C : S B C, A A C
• Transmission range : up to 15 m
• Play time with A N C : up to 4 h
• Play time without A N C : up to 5 h
• Talk time with A N C : up to 4 h
• Talk time without A N C : up to 5 h
• Standby time : up to 250 h
• Driver : Dynamic, 13 mm Neodymium
• DC resistance. 34±15%Ω
• MIC sensitivity. …..-42±3dB
• Weight of earphones. ..8g
• Ambient temperature.. -20°C~60°C

Functional Diagram

Operation/Function

Power On

1. 1、Opening the charging case automatically turns it on, with the blue light flashing 3 times and a “power on” voice prompt
2. If previously paired, it reconnects automatically after powering on, entering connectable mode if re connection fails after 10 seconds

Power Off

1. It shuts off automatically when placed back into the charging case
2. If there are no connected devices, it powers down after five minutes, accompanied by a “power off” voice prompt

Incoming Call

Answer/End : Just a single click on either earphone
Reject Call

To reject a call, hold down the touch-sensitive area for 2 seconds to hear a “Du” sound
Call Switching

During a call, long-press for 2 seconds to hold the current call and answer another. Repeat to switch between calls, signaled by a “Du” sound
**Music Playback

Play/Pause : Just a single click on either earphone, accompanied by a “Du” sound
Phone Connection**

1. Removing from the charging case triggers pairing mode with rapid red and blue flashing lights
2. Activate Bluetooth search on the phone and connect to “T80BT ANC” once detected

**Earphone Reset

In pairing mode, hold the touch-sensitive area for 5 seconds. LED flashes red and blue three times with a “Du Du Du” sound to confirm reset
Voice Function

Triple-click the earphone touch button to activate the phone’s voice assistant, confirmed by a “Du” sound 06
Out of Range Re-connection
When out of range, it attempts to reconnect with rapid blue flashing lights. Auto-reconnects within five minutes if back in range, or powers off otherwise
Multi-device Connection

**

1. Upon powering on, it enters pairing search mode. Connect to the first device and disable its Bluetooth
2. Enter pairing mode again to connect to the second device
3. When the first device re-enables Bluetooth, simply tap its name on phones to connect, allowing both devices to connect simultaneously.

Charging
Earphone Charging

Place them in the case to charge, indicated by a red light, with the case’s indicator flashing dynamically until fully charged

Case Charging

Compatible with devices supporting 5V ± 0.2V output, with an LCD indicator showing the charging status
Game Mode Quadruple tap on either earphone for ultra-low latency gaming mode, with a voice prompt and default off
**Three Mode Switching

**Double tap while powered on to switch modes, with voice prompts for ANC on, ambient sound, or ANC off

Active Noise Cancellation Mode
Recommended for noisy environments to actively reduce noise and enhance music enjoyment
Ambient Sound Transparency Mode

Allows conversation without removing headphones, enhancing environmental awareness and safety
Standard Bluetooth Mode

Suggested for quiet environments for regular Bluetooth usage

Precautions

1. Any improper use or unauthorized servicing that results in damage to your headphone will void the warranty
2. Do not use sharp objects near your headphone
3. Do not keep your headphone in charging mode for long period
4. Do not store your headphone near toxic chemicals
5. Do not store your headphone near magnets
6. Do not leave your headphone with a fully drained battery for long period
7. If your headphone is out of use for a long time, please charge it periodically to protect the battery
8. Not recommended to use active noise cancellation mode or ambient sound mode in wandy environment

Common Problems and Solutions

adifferent place
Voice is still coming fromphone during calls| Phone call audio is set tophone| Set to Bluetooth answer
Noise| Phone is too far away fromheadphone or there’sinterference in thesurrounding environment| Move closer to phone or moveto a different place
The sound of the headphoneis still low after the volume isturned up| The volume on thephone is too low| Increase the phone’svolume

founded by Mr Xu in 2005, As an innovative technology enterprise specialzng in audio prodiuct design, development, production and sals,the products range from in-car wired headphones,on-ar Headphones, Bluetooth Headsets headphone amplifies and other high-endaudio products,
InMarch 2009, we established the Hong Kong company”SoundMAGIC Technology Development Co,ud, focusing on overseas market expansion, and gradualy established and stabilzed the global distribution network. Up tornow, we have more than 80 istributors inmore than 30 counties in Asi, Europe and USA In September 2012,due to the expansion of production scale,”Dongguan Nianrui lectronic Technology C, 1d was estabished in Dongguan.
‘SoundMAGIC has a complete system integrating R&D, brand operation, marketing and manufacturing, which also lays a solid foundation to provide high-quality headphones with high cost performance for users

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

The device has been evaluated to meet general RF exposure requirement.

Shenzhen SoundMAGIC Technology Development Co.,Ltd 1901 # Building A, Weidonglong Business Building,Meilong Road No2125,Qinghua Community,Longhua District, Shenzhen, China
Tel: +86 755-88316487

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>