SoundMAGIC S20BT Wireless In-Ear Headphones with Mic User Manual

S20BY
Wireless In-Ear Headphone with Mic
User manual

Packing List

1. S20BT Wireless In-Ear Headphone with Mic
2. Angle-shaped silicone eartips S/M (Small size on the Headphone) Double flange silicon eartips| 3. USB charging cable
4. Carry pouch
5. User manual
---|---

Technical specifications

Bluetooth……………………………………………………………………………………Bluetooth V5.0
DIiIVED ……………………………………………………….Dynamics, 13.5mm, Neodymium
TTANSMISSION RANGE………………………………………………………………..Up 013M
IMPOCANCE…………………………………………………………………………………..16±10%Ω
MIC Sensitivity……………………………………………………………………………………..-42±3dB
Continuous Playback MUSIC………………………………………………………………..24~30H
Continuous Talk Time……………………………………………………………………………10~12H
Standby Time……………………………………………………………………………………………..140H
Weighy……………………………………………………………………………………………………….. 19.5g
Ambient Temperature……………………………………………………………………..-20 C~60°C

Function buttons/USB

S20BT has a built-in noise cancelling microphone, which can make/reject the phone calls crisply and reliably. And you can stop/start playing the music directly via the microphone control.

Basic functions and operations

1. Power on
   Press and hold the “Multifunction” button for 3 seconds to power on: “Power on” prompt will be heard when the headset is turned on.

2. Power off
   Press and hold the “Multifunction” button for 3 seconds to power off: “Power off” prompt will be heard when the headset is turned off.

3. Pairing
   

4. With your S20BT off, press and hold the “Multifunction” button for about 5 seconds until the red-blue LED is flashing rapidly (keep the button held down for another 2 seconds past the ‘power on’ prompt).

5. Open your smartphone’s Bluetooth connection function to enable Bluetooth mode and search for the Bluetooth device. You should find the S20BT headset. Select the S20BT to finish pairing.

6. Automatic Connection
   If your smartphone has been paired successfully with your S20BT, they will connect automatically if they’re within the effective distance (10m) and effective time period (5 minutes). If your S2OBT is outside the effective distance, it will disconnect. But if it comes back to being within the effective distance again within 5 minutes, it will connect back to your smartphone automatically. After 5 minutes with no connection, your S20BT will automatically power off.

7. Playing music
   Press “Multifunction” button to start music. Press again to stop music.
   Press “+” twice to play next song.
   Press “-” twice to play last song.

8. Volume Control
   Press “+” to increase the volume.
   Hold down “+” to increase the volume continuously.
   Press “-” to decrease the volume.
   Press and hold “-” to decrease the volume continuously.

9. How to reset the earphones
   Turn off the earphones, long press the “Multifunction” button for 10 seconds the first prompt “dududu” will be heard. Don’t release and keep press until you hear the second prompt “dududu’”. Then the earphones have been reset successful.

10. Incoming call
    When receiving an incoming call, press the “Multifunction” button to answer the call. Press the “Multifunction” button again to hang up. Rapidly press the “Multifunction” button for 2 seconds to reject the call.

11. Call waiting
    During a call, press the “Multifunction” button for 3 seconds to put the current call on hold and answer the incoming call. (This function may depend on your network operator).

12. Last number redial
    Press the “Multifunction” button twice to redial the last number.

13. Control of voice assistant (e.g. Google Assistant, Siri)
    Hold down the “Multifunction Button” for 1 second until you hear a short beep, then immediately release the “Multifunction Button”. The voice assistant is now active and waiting for your voice input.

14. Charging
    Please use a computer or USB outlet with 5V+0.2V output voltage to charge your S20BT, using the provided USB cable. A red light indicates that your S20BT is being charged. The red light will go out and the blue light will come on once your S20BT is fully charged (charge time is about 2 hours).

Maintenance and precautions

1. Any improper use or unauthorized servicing that results in damage to your S20BT will void the warranty.
2. Do not use sharp objects near your S20BT.
3. Do not keep your S20BT in charging mode for long periods.
4. Do not store your S20BT near toxic chemicals.
5. Do not store your S20BT near magnets.
6. Do not leave your S20BT with a fully drained battery for long periods.
7. If your S20BT is out of use for a long time, please charge it periodically to protect the battery.

Common Problem and Solutions

different place
No sound after pairing| Mobile Bluetooth media audio is not turned on| Enable mobile Bluetooth media audio
When making a call, voice is still coming from smart -phone| Smartphone call audio is set to smartphone| Set to Bluetooth answer
Noise/stuttering| Smartphone is too far away from S2OBT or there is interference in the surrounding environment.| Move closer to smartphone or move to a different place
The audio is still quiet after increasing the volume| The volume on the smartphone is too low| Increase the smartphone’s volume
My voice is too quiet when making a call| The microphone aperture is clogged with dust| Clean your S2OBT
Unable to hold current call and answer incoming call| Phone operator hasn’t enabled this function.| Contact the phone operator to enable this function.

Customer service and support

Please contact us directly for service and support. Our service team is ready to help you.
E-Mail: support@soundmagic.com
Phone: +86 769 81270118
Fax: +86 769 81270128

Factory address: Fulong Industry Road 8, Fulong Community Shipai @
Town, Dongguan, China
For more information about SoundMAGIC , please visit our website: www.soundmagic.com

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

1. Reorient or relocate the receiving antenna.
2. Increase the separation between the equipment and receiver.
3. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
4. Consult the dealer or an experienced radio/TV technician for help

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

SoundMAGIC Group Marketing

Hongkong SoundMAGIC Technology Development Co.,LTD
Shenzhen SoundMAGIC Technology Development Co.,LTD

R & D and Manufacture
Dongguan Nianrui Electronic Technology Co.,LTD
Fulong Industry Road 8,Fulong Community Shipai Town,Dongguan,China
Tel: 086-769-81270118/89633128 Fax:086-769-81270128
Email: support@soundmagic.com
www.soundmagic.com
FCC ID: A6B-S20BT

ShenZhen SoundMAGIC Technology Development Co.,LTD
Address: 1613# Building A,Weidonglong Business Building,Meilong Road No 2125,
Qinghua Community,_Longhua District, Shenzhen China

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>