SoundMAGIC E11C Wired Earbuds with Microphone HiFi Stereo Instructions Manual
- June 5, 2024
- SoundMAGIC
Table of Contents
SoundMAGIC E11C Wired Earbuds with Microphone HiFi Stereo
Specifications
- BRAND: SoundMAGIC
- EAR PLACEMENT: In Ear
- COLOR: Gunmetal with MIC
- CONNECTIVITY TECHNOLOGY: Wired
- MODEL NAME: E11C
- DRIVERS: 10mm
- COMPATIBILITY: computer, iPhone and Android
- PRODUCT DIMENSIONS: 47.24 x 0.39 x 0.59 inches
- ITEM WEIGHT: 0.529 ounces
Introduction
The SoundMAGIC E11C earphone produces a balanced sound picture with enhanced transparent detail and warm, textured bass thanks to newly engineered 10mm dynamic drivers. The lightweight and durable housing of the E11C earphone features a delicate texture with a refined and elegant look. It is made entirely of aluminum using a high-precision cutting process and is completed with a special hand painting process. The E11 earphones are equipped with premium silver-plated copper wire to ensure optimum signal transmission, effectively reducing signal quality loss and achieving high-resolution sound levels.
It has a 3-button controller that makes it simple to control calls and music. While working out or traveling, you can answer calls hands-free and end them thanks to the built-in high-quality microphone. The E11C in-ear headphones combine ergonomic angled sound tubes with an in-ear fit that completely seals the ear canal with soft silicone eartips to provide a secure fit that not only isolates outside noise well but also ensures you hear their full sonic spectrum. You are then treated to a well-balanced, entertaining, and energetic sound.
HOW TO WEAR
Put the in-ear headphones on after ensuring proper orientation. Put the ear tip of either side of your head where it belongs. With the help of the other hand, gently pull your earlobe to make room for inserting the ear tip into your ear canal. Put the wire in front of or behind you, depending on your inclination.
HOW TO PROGRAM
- Get an earphone splitter and connect it to the aux output of your audio device.
- Connect the output jacks of the splitter to the jacks of the two headphones.
- Play sound-quality test audio or video file to check the sound.
HOW TO USE
Your device’s volume limit should be set to no louder than 70% of its maximum volume. Don’t pay too much attention. Use the 60/60 rule, which states that you should listen at 60 percent volume for 60 minutes before taking a break for at least 30 minutes to give your hearing a break.
HOW TO KEEP EARBUDS FROM FALLING OUT
Your ears are held in place by ear hooks or over-the-ear/around-the-ear designs that clasp around them. As they provide a better and more stable hold than other types of earbuds, these are the best if you intend to wear the headphones while engaging in activities that demand a lot of movement.
HOW TO TEST MICROPHONE
Speak into the microphone to check it out. Green bars on the volume meter indicate that the device is correctly picking up sound. Change the microphone by using the drop-down menu. Try unplugging and replugging the microphone you’re trying to use if you can’t see it.
Frequently Asked Questions
How do SoundMAGIC headphones perform?
These are some of the greatest earphones available, and they offer amazing value for the money because to their stunning sound quality and low pricing. Many people have recently taken notice of SoundMAGIC’s award-winning E10 earphones.
What is the purpose of the button on wired earbuds?
If the headset has buttons for volume control: Each time the volume-up button is used, the volume should rise incrementally until the maximum volume is reached. The volume should rise gradually to its highest level if the volume- up button is pressed and held.
What keeps earphones in your ears?
Try gently stretching your earlobe with one finger to first widen the ear canal. The ear canal will create a tighter seal around the earbud once you insert the eargel and release. This frequently enhances both the fit and the sound quality. This one is unmistakably low-tech, yet it works.
How does the earbud microphone function?
Generally, the microphone is located in the right earpiece when they are true wireless earbuds. If it is merely a wireless earbud, the microphone can be found in the little casing that is attached to the in-line wire that joins the right and left earpieces.
What causes wired earphones to malfunction?
The most common reasons why earphones and earbuds quit working are cable tension, incorrect wiring from the manufacturer, moisture damage, and damage to the sound drivers. These incidents could result in audio shorts or a total disconnect between the drivers and the audio source.
Why won’t my earbuds charge?
Ensure that they are placed correctly on the charging case or stand. Some headphones are charged through a stand or case that has a cord attached to it rather than directly through a cable. If you experience this, check that your headphones are set up correctly so that they can receive a proper charge.
How long can we wear headphones?
When analyzing headphones and hearing loss, the length of exposure to noise is also a crucial consideration. As a general rule, only spend up to 60 minutes each day using MP3 players at levels up to 60 percent of their maximum loudness, advises Dr.
How can you tell whether earbuds fit?
You can try carefully inserting your fingers, starting with the smallest, inside your ears. As soon as you achieve a sound seal and outside noise is muffled, move to the following finger on each hand. Next, try to match that finger’s size to one of the available ear tip sizes.
What can I do to make my earbuds cozier?
Replace the covers or earbud tips if your earphones are unpleasant. This is one of the finest ways to increase comfort and enhance fit. The majority of earbuds have rubber coverings or tips; switching to foam will frequently result in a better (and more comfortable) fit.
Why won’t my earbuds stay in?
According to Dr. Voigt, if your ear canal is “too large,” the earbuds won’t have anything to rest against and will thus be very easy to lose. The earbud won’t be able to fit properly if the ear canal is “too small,” and it may pop out as a result.
Video
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>