SoundMAGIC P60BT Bluetooth Noise Cancelling Wireless Headphones User Manual

SoundMAGIC P60BT Bluetooth Noise Cancelling Wireless Headphones

FCC STATEMENT

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

This device complies with Part 15 of the FCC Rules. Operation

1. of this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

FCC ID: A6B-P60BTANC

Packing List

1. Headphone bag
2. Headphone
3. User manual
4. Cable storage bag
5. Computer adapter
6. USB cable
7. Cable with microphone boom

Technical specification

• Technology standard
  

  • Bluetooth 5.2

• Bluetooth profile
  

  • A2DP,AVRCP,GAVDP,HFP,HSP

• DAC
  

  • aptXHD,aptX,SBC,AAC

• Transmission range
  

  • up to 15m

• Playtime with ANC
  

  • up to 45h

• Play time without ANC
  

  • up to 50h

• Talk time with ANC
  

  • up to 42h

• Talk time without ANC
  

  • up to 45h

• Driver
  

  • 40mm,Dynamic, Neodymium magnet

• Driver Sensitivity
  

  • 115±3dB at KHz lmW

• Driver DC resistance
  

  • 38±10%0

• MIC sensitivity
  

  • -42±3dB at KHz

• Headphone weight
  

  • 311±10g

• Storage temperature
  

  • 25±10 degree

• Work temperture
  

  • -15~45 degree

• Battery

  • 800mAh Li-ion polymer

Functional diagram

Operation/Function

Power on

1. Long press the button for seconds to turn on the headphones, the blue indicator blinks3 times, and the voice prompts “Power on”
2. Power button: if there’s no pairing record, it will automatically enter the pairing mode after powering on. If the headphones and the phones had connected before, they will connect after powering on. If fails to re-connect after 10 seconds, it will enter the pairing mode

Power off

1. Manual power off. long seconds to power off, the red light blinks 3 times. The power-off function is shielded during an incoming call or in a calling voice prompts”Poweroff”
2. Automatic power off: if there is no connected device, it will automatically power off after 5 minutes, and the red light will blink 3 times, the voice prompts “Power off”

Incoming call

• Double-click TCP: answer/hang up

Reject call

• Long press TCP 2 seconds when the call is coming

Switch calls

During a call, long press MFB 2 seconds to put the current call on hold and answer the incoming call

Play music

Volume control

• Slide up on the touch area once to turn the volume up a notch
• Slide up on the touch area and pause, the volume continues to increase
• Slide down on the touch area once to turn the volume down a notch
• Slide down on the touch area and pause, the volume continues to decrease

Phone connection

• NFC connection

1. Turn on the NFC function on your phone
2. The headphone enters the pairing state, put the phone close to the NFC identification zone
3. The phone pops up with a matching request
4. Click”Pair” to connect successfully

• Pair connection

1. 3-click power button to automatically enter the pairing state, the red-blue light flashing quickly
2. Search the Bluetooth on the phone
3. Find Bluetooth headphones “P60BT ANC”
4. Confirm the pairing request to connect successfully

Headphone reconnection

• Manual reconnection

When unable to auto-reconnection, double click TCP, the blue light blinks, and the headphone will auto-connect with the phone

Automatic reconnection

• Phone and headphones are on

Reset headphone

• Turn off the headphones, long press the power button for 10 seconds, the red and blue lights 3 times, reset successfully.A voice prompt automatically power off

Voice function

1. Enable the mobile phone voice assistant
2. Activate SIRI, 3-click on TCP, and the voice prompt

Play/p ause music

• Doule-click on TPC, and the voice prompt

Wired headphone usage status

1. Once the cable with the microphone boom is plugged in, the power will be cut off, the Bluetooth function will be disabled
2. Used as a game headphone by plugging in the microphone boom cable

Headphone charging

1. Being charged when the headphone is on: the red and blue lights will flash, and the blue light will on long and bright when fully charged
2. Being charged when the headphone is off: the red light will be on long and bright, and the light will be off when fully charged

Three switching modes

Press the Power button once, voice prompts: Normal mode

• ANC mode
• Ambient sound

Normal Bluetooth mode

When listening to music in a quiet environment, it is recommended to use normal Bluetooth mode

Active Noise Cancellation mode

When listening to music in a noisy environment such as on a plane, train or subway, it is recommended to use active noise cancellation mode to actively eliminate the noise and enjoy the wonderful music.

Ambient Sound mode

When talking with your friends, no need to take off the headphones and turn on the ambient sound transparent mode to talk to each other. In the street, you can also hear important environmental sounds, including the whistle, and driving sound, to ensure personal safety.

Precautions

1. Any improper use or unauthorized servicing that results in damage to your headphones will void the warranty
2. Do not use sharp objects near your headphone
3. Do not keep your headphones in charging mode for a long period
4. Do not store your headphones near toxic chemicals
5. Do not store your headphones near magnets
6. Do not leave your headphones with a fully drained battery for a long period
7. If your headphones are out of use for a long time, please charge them periodically to protect the battery
8. Not recommended to use active noise cancellation mode or ambient sound mode in a wandy environment

Common problems and solutions

Please contact us for service and support. Our professional service team is ready to help you. Service hotline: 0769-81270118 Shenzhen SoundMAGIC Technology Development Co.,Ltd

Address
1613# Building A, Weidonglong Business Building, Longhua District, Shenzhen, China Tel: 0755-88316487

About SoundMAGIC

SoundMAGIC is a registered brand of Shenzhen SoundMAGIC Technology Development Co., Ltd, was founded by Mr Xu in 2005. As an innovative technology enterprise specializing in audio product design, development, production and sales, the products range from in-ear wired headphones, on-ear Headphones, Bluetooth Headsets, headphone amplifiers and other high-end audio products. In March 2009, we established the Hong Kong company “SoundMAGIC Technology Development Co., Ltd”, focusing on overseas market expansion, and gradually established and stabilized the global distribution network. Up to now, we have more than 80 distributors in more than 30 countries in Asia, Europe and the USA. In September 2012, due to the expansion of production scale, “Dongguan Nianrui Electronic Technology Co., Ltd.” was established in Dongguan. SoundMAGIC has a complete system integrating R&D, brand operation, marketing and manufacturing, which also lays a solid foundation to provide high-quality headphones with high-cost performance for users.

Customer Support: support@soundmagic.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>