SoundMAGIC P60BT ANC Wireless Headphone User Manual
- June 5, 2024
- SoundMAGIC
Table of Contents
P60BT ANC Wireless Headphone
User Manual
P60BTANC
OVER EAR BLUE
TOOTH HEADPHONES WITH
ACTNME HYBRID NOISE CANCELLATION
https://2dcode.org/0106949379002441
Packing List
- Headphone bag
- Headphone
- User manual
- Cable storage bag
- Computer adapter
- USB Cable
- Cable with microphone boom
Technical Specification
Technical standard …………………………………..Bluetooth 5.0
Driver ……………………………………………………..Dynamic40mm Neodymium
Transmission range …………………………………..up to 15 m
impedance…………………………………………………3 ±10%Ω
MIC sensitivity ……………………………………………-42 ± 3d B
Continuous playtime………………………………………. 50h
Continuous talk time………………………………………. 50h
Headphone weight………………………………………….311g
Ambient temperature………………………………………-20°C-60°C
Functional diagram:
Operation/Function
1. Power on
- Long press the button for 3 seconds to turn on the headphone, the blue indicator blinks 3 times, and the voice prompts “Power on”
- Power button: if there’s no pairing record, it will automatically enter the pairing mode after power on. If the headphone and the phones had connected before, they will connect to each other after power on. If I fail to re-connect after 10 seconds, it will enter the pairing mode
2, Power off
- Manual power off. long press seconds to power off, the red light blinks 3 times. The power-off function is shielded during incoming calls or during a call. The voice prompts “Power off’
- Automatic power off. if there is no connected device, it will automatically power off after 5 minutes, and the red light will blink3 times, the voice prompts “Power off’
3. Incoming call
Double-click TCP: answer/hang up
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in an articular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user s encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Listen More
SoundMAGIC, we listen morel
Documents / Resources
|
SoundMAGIC P60BT ANC Wireless
Headphone
[pdf] User Manual
P60BTANC, A6B-P60BTANC, A6BP60BTANC, P60BT ANC Wireless Headphone, P60BT, ANC
Wireless Headphone
---|---