SoundMAGIC P60BT GM Performance Wireless Gaming Headset User Manual

SoundMAGIC P60BT GM Performance Wireless Gaming Headset

Package contents

1. Headphone
2. User manual
3. Carry bag
4. Wireless transmitter
5. Type-C OTG
6. PowerCable
7. Microphone boom
8. Stereo audio cable

Technical specification

Technology standard. ……………………………. 2.4G Gaming/Bluetooth 5.2
DAC ………………………………………………………………………………. SBC,AAC
Driver.. …………………………………… 40mm,Dynamic, Neodymium magnet
Transmission range ………………………………………………………. up to 15m
Continuous playing time. ……………………………………………….. up to 50h
Continuous talk time. …………………………………………………….. up to 50h
Driver DC resistance ……………………………………………………… 32± 10%0
MIC sensitivity ……………………………………………………. -42±3dB at !KHz
Head phone weight ………………………………………………………… 311 ± 10g
Storage tern peratu re ………………………………………………. 25 ± 10 degree
Work temperature ………………………………………………….. -15-45 degree
Battery. ………………………………………………………. S00mAh Li-ion polymer

Connect USB transceiver parameters

Continuous music time ……………………………………………… up to40h
Continuous game time ……………………………………………….. up to 40h

Functional diagram

Operation/Function

Power on

1. Pressing the power button for 3 seconds to turn on the headphone, it will automatically enter the pairing state when there is no connection.The red-blue indicator flashes, the voice prompts “Power on”
2. It will automatically connect to the devices after first time pairing successful, and you will need to shut down the Bluetooth on the current device if you want switch to the other one

Power off

1. Manual power off. pressingforSseconds to power off, the red light will flash 3 times. The power off function is shielded during incoming call or in a call
2. Automatic power off. it will automatically power off after 5 minutes if there is no connected device, and the red light will flash 3 times, the voice prompts “Power off”

Incoming call/reject call

1. Double-click TCP: answer/hang up
2. Pressing for 2 seconds: reject call

Switch Calls
During a call,  pressing TCP for 2seconds to put the current call on hold and answer the incoming call

Play music

Volume control

Voice function

1. Enable the mobile phone voice assistant
2. Triple click to activate the voice assistant function

Phone connection

NFC connection

1. Turn on NFC function on your phone
2. The headphone enters the pairing state, put the phone close to NFC identification zone
3. The phone pops up a matching request
4. Click”Pair”to connect

Bluetooth connection

1. Triple click power button to automatically enter the pairing state, the red-blue light blinking quickly
2. Open Bluetooth on the phone
3. Find “P60BT GM”
4. Confirm the pairing request

Headphone reconnection

Automatic reconnection
12 to 15m effective distance without any obstacles

Manual reconnection
When auto-reconnection failed, click TCP, the blue light flashes for 2 seconds, the headphone reconnect to the phone

Reset headphone
Turn off the headphone, pressing the power button for 10 seconds, the red and blue lights flash 3 times, reset successfully

Mute

1. Press the power button to turn the microphone on or off, the voice prompts “mute” or “unmute”
2. If people can’t hear you during the call,the microphone is mute,please press the power button, and the voice prompt “unmute”

Wired headphone usage status
Once the audio cable is plugged in, the Bluetooth disconnected

Headphone charging

1. When headphone is on:
   The LED switching blue and red when charging It is fully charged if blue light stays on

2. When headphone is off:
   The red light stays on until it fully charged

Wireless Transmitter

1. Preset wireless transmitter that can be easily plugged into your device for 2.4G Wireless connection
2. If the headphone cannot connect to the transmitter, please follow the steps:
3. Turn on the headphone, click power button 5 times, the red and blue lights flash alternately
4. Insert the USB to the computer, the white light flashes every 3 seconds once connected successfully

Use Type-C OTG

1. By using Type-c OTG to connect your phone and headphone as picture showing
2. Please follow instruction 14,if it doesn’t work

Microphone boom for gaming

Bluetooth/2.4G Wireless dual mode

1. The headphone has been connected with the wireless transmitter from the factory. Turn on the headphone, plug the wireless transceiver into the computer, the headphone will connect automatically.To use bluetooth connection with your phone,please follow the instructions 8
2. When playing the game, you can directly use the headphone to answer the call without any operation

Switching mode
When the headset is connected to the 2.4G wireless mode and Bluetooth mode at the same time, double-click the Power button, and the white light flashes every 3 seconds, then it Is on 2.4G wireless mode. If the blue light flashes every 3 seconds, it is on Bluetooth mode

Network conference

Precautions

1. Any improper use or unauthorized servicing that results in damage to your headphone will void the warranty
2. Do not use sharp objects near your headphone
3. Do not keep your headphone in charging mode for long period
4. Do not store your headphone near toxic chemicals
5. Do not store your headphone near magnets
6. Do not leave your headphone with a fully drained battery for long period
7. If your headphone is out of use for a long time, please charge it periodically to protect the battery

Common problems and solutions

About SoundMAGIC

SoundMAGIC is a registered brand of Shenzhen SoundMAGIC Technology Development Co., Ltd, founded by Mr Xu in 2005. As an innovative technology enterprise specializing in audio product design, development, production and sales, the products range from in-ear wired headphones, on-ear Headphones, Bluetooth Headsets, headphone amplifiers and other high-end audio products.

In March 2009, we established the Hong Kong company “SoundMAGIC Technology Development Co.,Ltd”, focusing on overseas market expansion, and gradually established and stabilized the global distribution network. Up to now, we have more than 80 distributors in more than 30 countries in Asia, Europe and USA. In September 2012, due to the expansion of production scale, “Dongguan Nianrui Electronic Technology Co., Ltd.” was established in Dongguan.

SoundMAGIC has a complete system integrating R&D, brand operation, marketing and manufacturing, which also lays a solid foundation to provide high-quality headphones with high cost performance for users. Customer Support: support@soundmagic.com

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>