MicroTouch NewTral 3 Mouse User Manual
- June 25, 2024
- MICROTOUCH
Table of Contents
MicroTouch NewTral 3 Mouse User Manual
FEATURES
- Interface: 2.4 GHz Wireless
- Button: 6 Buttons Programmable(Left & Right Click, Back & Forward, DPI Switch, Scroll Wheel and Middle Button)
- Hand Orientation: Right
- DPI Resolution: Optical Type 800/1600/2400
- Dimensions: 113.81 x 79.63 x 52.59mm
- Note: Battery: 1 X AA
REQUIREMENT
- Operating system: Windows 7/8/10
- Mac(Not Programmable for Mac System)
- Available USB port
DESCRIPTION
HARDWARE INSTALLATION
- Turn on your computer.
- Pull out the USB Receiver from the bottom of the Neutral 3 mouse and insert it into your computer’s USB port.
- Your operating system will automatically detect and assign a driver.
- Turn on your mouse with the ON/OFF switch and it will automatically pair with the inserted USB receiver.
NEUTRAL 3 MOUSE SOFTWARE INSTRUCTION
Download the software from
web:http://www.newtralmouse.com/download.html
- Once you have followed the installation steps, go into your “system tray” by clicking on the arrow located to the left of your Windows clock and click on the Microtouch Neutral Mouse Wireless.
- You can set the language you want in the top right-hand corner of the menu. the configuration menu has three tabs: “Button assigns”, “Sensitivity” and”‘ Support”.
- The options available on the tabs are explained below.
- Click on “BUTTON ASSIGN” to change your mouse button function and click “APPLY” to save the setting. By using the “Restore to default” button you can return all settings to factory default Settings.
- Click on “SENSITIVITY” to change the speed of your mouse cursor as well as adjust
- DPI settings and click”APPLY” to save the setting. By using the “Restore to default” button you can return all settings to the factory default Setting.
- Click on “SUPPORT” you may find the hardware and software information.
FCC STATEMENT
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference
that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party
responsible for
compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, under Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used by the instructions, may cause
harmful interference to radiocommunications. However, there is no guarantee
that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Download PDF:MicroTouch NewTral 3 Mouse User Manual
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>