baseus AeQur 30 Air Portable Wireless Speaker User Manual

: June 25, 2024
: Baseus

Table of Contents

baseus AeQur 30 Air Portable Wireless Speaker
Pairing
Instructions
Specifications
Content
Read User Manual Online (PDF format)
Download This Manual (PDF format)

baseus AeQur 30 Air Portable Wireless Speaker

baseus-AeQur-30-Air-Portable-Wireless-Speaker-PRODUCT

Customer Service

24-Month Warranty
Lifetime Tech Support

Baseus AeQur 30 Air Portable Wireless Speaker
Before using the product, thoroughly read this manual. Keep the manual for future reference.

Pairing

Power-on
When pairing for the first time, long-press the multifunction button for 2 seconds to tum the speaker on. The multifunction button indicator and the ambient light will flash, indicating the speaker is in pairing mode.

Bluetooth connection
Tum on Bluetooth on your phone and search for “Base us AeQur 30 Air” The speaker automatically connects to the last device used when you turn it on after the initial pairing. The multifunction button indicator and the ambient light flash during the connection.

Download the app and log in to connect the device to it.

Power-off
Long-press the multifunction button for 3s to turn off the speaker. baseus-
AeQur-30-Air-Portable-Wireless-Speaker-FIG-1

Instructions

Music mode

Play/Pause : Press the Multifunction button.
Previous: Press and hold the Volume- button for 1.5s.
Next: Press and hold the Volume+ button for 1. Ss.
Decrease volume : Press the Volume- button.
increase volume : Press the Volume+button.
EQ switching : Press the EQ button
Sequence: Normal> Vocal Mode

Note: After 40 minutes of no audio output when connected, the speaker will enter sleep mode. baseus-AeQur-30-Air-Portable-Wireless-Speaker-
FIG-8

Light control

Long press the Light button to turn on/off the lights.
Press the Light button to switch the lighting effects (RGB breathing cycle by default-solid blue – solid purple – solid orange – smart lighting effect, switching in circles). Lighting effects can be customized in the app.

TWS Pairing

Tum off Bluetooth on your phone, and triple-press the EQ button. The RGB light will stay white to enter TWS pairing mode. Once successfully paired, the Multifunction button indicator and the RGB blue light will flash simultaneously, indicating that it is ready to be connected to your phone.
Triple-press the EQ button to unpairfrom TWS.

Note: The speaker has a memory function for pairing, and to unlink, you need to press the multifunction button five times to restore factory settings.

Reset to factory settings:
While the device is powered on, press the multifunction button 5 times. Power indicator. While charging, the multifunction button indicator light will be breathing blue. Once fully charged, the blue light will stay on.

Battery level display
During charging, the display lights up and shows the current battery level. When the speaker is turned on, press any button to show the current battery level, and the display goes out after 10s.

Warnings
Improper use of the product can easily cause damage to the product or may endanger personal and property safety.

This product contains a battery inside. Please avoid exposing the product to sunlight, electric heater, or similar overheating environments. Do not store the product in high temperature, strong light and strong magnetic places.
Do not keep it in other harsh environments such as near the fire source. Intense physical actions such as knocking, throwing, trampling on squeezing, or putting into fire shall be avoided. Do not use it in case of expansion.
The ambient temperature of the product is 0-45°C.
Inappropriate use of the product against this user manual or ignoring warnings can easily cause damage to the product or may endanger personal and property safety. Consumers shall bear for all the consequences, to which our company will not assume any legal liability.
Decomposition of this product by non-professionals is strictly prohibited. Otherwise, it may cause a fire or damage the product.
Do not use a load (electrical appliances) that exceeds the output current of this product A circuit protection mechanism is built-in to automatically stop working if loads exceed.
Do not put this product in water (or washing machine). Any damage resulting from water into the earphones caused by the consumers themselves, the responsibility falls to the consumers, where our company won’t be able to provode any after-sales or return services.
Please use a qualified and CCC<ertified power adapter to charge this product.

Note: For the waterproof level, please refer to the detailed introduction.