Schreder Midi Flexia Quercus Lighting Instruction Manual
- June 24, 2024
- Schreder
Table of Contents
Schreder Midi Flexia Quercus Lighting
Product Specifications
- Brand : FLEXIA
- Model : QUERCUS Midi
- Power : 220-240V
- Frequency : 50-60Hz
- Dimensions : 682 x 578 x 478 mm
- Weight : 11.5 kg
Product Usage Instructions
Installation
- Refer to the installation manual provided for detailed step-by-step instructions.
- Ensure the main cable is securely placed under the screws as indicated in the manual.
- Follow the specified torque values for tightening the joints to ensure proper installation.
Maintenance
Do not touch the CR-KIT until it has cooled down. Follow the maintenance
instructions provided in the manual for CR-KIT EU and CR-KIT CSA/UL.
Reassembling
- Ensure you respect the polarity as marked on the label during reassembling.
- Follow the reassembly steps provided in the manual for proper maintenance.
Frequently Asked Questions (FAQ)
-
Q: Can the product be used with a different power supply?
- A: No, the product is designed to operate within the specified power range of 220-240V.
-
Q: What should I do if I encounter a maintenance issue with the CR-KIT?
- A: Do not attempt maintenance until the CR-KIT has cooled down. Refer to the maintenance instructions in the manual for proper handling.
-
Q: Is it necessary to follow the torque values during installation?
- A: Yes, following the specified torque values is crucial to ensure secure installation and proper functioning of the product.
FLEXIA QUERCUS Midi
Side-Entry with swivel
INSTALLATION INSTRUCTIONS
A. Knuckle joint angle
B. Knuckle joint Side-Entry 60×50 square
C. Knuckle joint Side-Entry penetrating Ø48mm
D. Knuckle joint Side-Entry enclosing Ø60mm
E. Knuckle joint 1” gas female side-entry
F. Knuckle joint 1” gas male side-entry
G. Knuckle joint Surface
H. Maximum angle opening
I. Knuckle joint Rear bracket
J. Maintenance CR-KIT EU
K. Reassembling
L. Maintenance CR-KIT CSA/UL
M. Reassembling
- www.schreder.com
- 02-68-585 | rev C | 04-2024
SAFETY INSTRUCTIONS
The light source contained in this luminaire shall only be replaced by the
manufacturer or his service agent or a similar qualified person. Always switch
off the power prior to installation, maintenance or repair activities.
RISK GROUP 2 RISK GROUP 2 – CAUTION! Hazardous optical radiation may be emitted from this product. Do not stare at the luminaire when operating as it may be harmful to the eyes. The luminaire should be positioned so that prolonged staring at the luminaire at a distance of less than 0.94m is not expected.
ENERGY EFFICIENCY This product contains a light source of an energy efficiency class G or higher or see table on first page.
PVC INSULATION AND Y CONNECTION In case of PVC insulated mains cable, the installer MUST ensure that the WHOLE cable is protected against climatic conditions, especially UV rays and rain, by making sure that the cable is contained inside the luminaire and pole.
- 02-68-585 | rev C | 04-2024
- www.schreder.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>