ventev Hard Lid Ceiling Tile Mount with Interchangeable Door Instruction Manual
- October 27, 2023
- ventev
Table of Contents
INSTALLATION AND REMOVAL OF ARUBA AP-555 AND AP-655 CTEN DOORS
Due to the large size of the access point, the range of motion of the open door is limited to about 45 degrees. Follow instructions below to install and remove the door.
INSTALLATION INSTRUCTIONS
- Install the access point into the CTEN door and plug in the ethernet cable.
- Depress both spring pins with your index fingers while supporting the door with the rest of your fingers.
- Hold the door so that it is horizontal and parallel with the CTEN base in the ceiling. Start lifting the door into the base opening.
- Guide the pin side of the door into the opening first. When this side of the door is inserted between the walls of the opening, the walls will now be depressing the spring pins.
- Support the pin side of the door with one hand, while using the other hand to push the lock side of the door into the base opening until the door is flush with the base.
- You should hear the pins click into place. Open the door to confirm the pins are locked into the base.
REMOVAL INSTRUCTIONS
- Open the door as far as it will go.
- Use one hand to support the lock side of the door.
- Using a flat head screwdriver in the other hand, pry the spring pin open.
- When the spring pin is released, repeat for the other spring pin and the door should now be released from the base.
ventevinfra.com | sales@ventev.com | 800-851-4965 | ©2022 Ventev
References
Read User Manual Online (PDF format)
Loading......