LIMINK SC6 Triple Lens Borescope Endoscope Inspection Camera User Manual
- June 11, 2024
- LIMINK
Table of Contents
LIMINK SC6 Triple Lens Borescope Endoscope Inspection Camera
Important Notes
Before use
- Please use a high quality 5A 1A charger to charge the device.
- Please use a high quality class 10 TF card.
- Only within the effective focal length, the image is the clearest.
Please make sure the target object is observed within the effective distance (3CM-10CM).
Features
Part name and function
Function Introduction
-
Key Settings menu
-
Key Scroll & UP
-
Key On/Off & OK
-
Set LED illumination & Down key
-
Camera & Video Button
-
DC 5V charging port
-
TF card slot
-
Camera lens
-
IPS display
-
Settings Menu Key : Short press to enter menu page and make settings for date, time and language; Short press to return to previous level or exit menu page.
-
Scroll & UP Key : On the shooting page, press briefly to view picture/video (memory card must be inserted); Note: Dual press and hold for 2 seconds, and the lenses can be switched to each other. Press briefly in > date/time submenu to increase the date/time value; Press briefly in > language setting submenu to select the desired language; Other modes, up or down.
-
On/Off & OK Key : Press 2 seconds to turn on/off. In the menu page, press briefly to confirm; In the browse mode, press briefly to play the video and press pause again. When charging, the red light on the OK button will be on; When the camera is fully charged, the red light will go off.
-
Set LED illumination & Down Key : On the shooting page, the brightness of the camera can be adjusted in three levels. In the submenu > date time, press briefly to decrease the value of date time; In the submenu > set language, press briefly to select the desired language; Other modes, up or down.
-
Camera & Video Button: Short press to take photo, long press to record video, then press once to stop.
-
DC 5V Charging Port: 5V1A power supply.
-
TF Card Slot: Connector for TF cards up to 64GB, supports only class 10 or higher TF cards in FAT32 format (not included in this device).
-
Camera Lens : Configured with three 2 megapixel inspection cameras on top of the cable, the focal lengths of the lenses: main lens1.18-3.93in, left and right lens 0.78-2.36in, and 0.59-1.18in.
-
IPS Display: 4.3-inch 1920*1080P IPS screen
Steps to use
-
See example – 1)insert the TF card.
(equipped with 32GB) into the TF card slot; press lightly until the card clicks into place (note: the Class 10 TF card must be inserted to capture and store images and video). -
Press the power button for 2 seconds. After the power-on screen loads, the image appears and the lens light illuminates. Briefly press the lens illumination adjustment button to adjust the brightness of the lens to the environment.
-
Press the photo button: short press to take a photo, long press to take a video, then press once to stop.
-
If the TF card is not inserted, it can only observe normally and cannot take photos/videos
-
For other functions, please describe the operation in combination with the detailed functions.
Parameter
Lens diameter | 8.0mm |
---|---|
Focal length | Front lens(A) 3-10cm; Side lens(B) 2-6cm; Side lens(C) 1.5-3cm |
Camera resolution | 2.0MP |
Viewing angle | 78° x 3=234 |
Battery capacity | 3500mAh |
Monitor | 4.3-inch color IPS |
Light source | 8 adjustable LED lights |
Language | CHS/CHT/EN/JP/FR/KR |
FAQs
Problem | Solution |
---|---|
The device cannot be switched on |
- Check if the battery is fully charged.
- Check if the power button works normally.
- check if the charging process is normal.
The device cannot read the card|
- Check if the format of the memory card is correct (only FAT32 file format is supported).
- Take out the TF card and insert it again.
- After formatting the memory card on the computer, insert it again.
Device crashes| Reset: press and hold the power button and photo button at the
same time.
Blurred image|
- Check if the observation distance is within the focal length.
- Check if there is water in the lens, place it in a ventilated and dry place to dry.
Other Instructions
- Other matters not mentioned, please contact the seller.
- This manual may be optimized without prior notice.
- Keep the product away from fire sources, flammable and corrosive environments.
- Keep the product out of the reach of children.
- Store it in a cool, dry and ventilated place.
- Dispose of the product at the end of its life in accordance with local environmental regulations.
Warranty
- This warranty is limited to the person who purchases L-LIMINK products.
- L-LIMINK products are warranted against defects in materials and workmanship for a period of one year (12 months) from the date of shipment to the user
Customer Support
CET PRODUCT SERVICE LTD
Beacon House Stokenchurch Business Park, Ibstone Rd, Stokenchurch
High Wycombe HP14 3FE UK
(E-mail: info.cetservice@gmail.com)
C&E Connection E-Commerce (DE) GmbH
Zum Linnegraben 20, 65933, Frankfurt am Main, Germany
(E-mail: info@ce-connection.de)
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>