ventev 274461 Universal L-Bracket for VenDome Antenna Pole Instruction Manual
- June 12, 2024
- ventev
Table of Contents
Universal L-Bracket for VenDome Antenna
Pole, Mast, and Wall Mounting
Installation Instructions:
For Pole and Mast Mounting
For 2 in. OD pipe/pole, clamp L-bracket (item #1) to the pipe/pole using
supplied U-bolts (item #2) and hardware. Use pole clamp bracket (item #3)
against the pipe/ pole as shown in Figure 1. Firmly tighten hardware.
For Pole/Mast Larger Than 2 in. OD
Use supplied stainless steel band clamps (item #8) and pass through slots on
the L-bracket as shown in Figure 2. Firmly tighten screw on the band clamp.
For Wall Mounting
Secure L-bracket (item #1) using appropriate ¼ in. screw and hardware to wall.
Note: Installer to supply appropriate wall hardware.
Antenna Mounting
- Remove nut from the antenna stud, slide leads through large open slot on the bracket, and pass antenna stud through mounting hole.
- Re-insert the antenna nut (and use flat washer if needed) and firmly tighten it.
All dims are in mm.
Every Ventev bracket is RoHS compliant and covered by company’s 2-year
warranty program.
| Description | SKU | MFG Part # |
|---|---|---|
| Universal L-bracket 2-14 in. OD | 274461 | VEN- ULBD-0214 |
Features & Benefits
- Universal L-bracket works with most VenDome and outdoor omnidirectional antennas
- Heavy duty construction suitable for harsh environment deployments; Mounts to wall or pole/mast from 2 to 14 in. OD
- Slotted L-bracket offers quick antenna mounting
| No. | Item Description | Qty. |
|---|---|---|
| 1 | L-Bracket | 1 |
| 2 | U-bolt 2 in. OD | 2 |
| 3 | Pole Clamp Bracket | 2 |
| 4 | Nuts for U-bolt | 4 |
| 5 | Lock Washer for U-bolt | 4 |
| 6 | Flat Washer for U-bolt | 4 |
| 7 | 1 in. Flat Washer for U-bolt | 1 |
| 8 | Pole Clamps, Stainless Steel | 2 |
ventevinfra.com \
[email protected] \
800-851-4965 \ ©2023 Ventev
All product specifications are subject to change without notice or obligation.
Rev. 051223