VEVOR O7225 72 Inch Wood Worktop Workbench User Manual
- June 13, 2024
- VEVOR
Table of Contents
VEVOR O7225 72 Inch Wood Worktop Workbench User Manual
INSTALLATION PREPARATION
- Two or more people to move and assemble the workbench.
- Please prepare a carpet or mat to protect your floor you need to spread out all the accessories.
- Please prepare gloves to avoid being scratched by sharp parts that may occur during installation.
- Please open all the boxes to check that the accessories are complete andin good condition (The accessories list on page 2).
- the box contains some small components, please place them properly before installation to keep them away from kids and ensure safety.
- If you need to use power tools to install this product, please set the speed to low speed in advance.
- When installing please align all the holes and do not tighten all the screws first, otherwise, it may make the installation difficult.
ACCESSORIES LIST
P1x1
| 
M5.512mm M812mmF1 x 26
F2 x 8
---|---
|
M8 M8*65mm ****F4x8 F3 x 16
P4x2|
M4*12mm F5x2
P5x4 P6x4|
F6x1
Kindly Notes:
- Please open all boxes to check the quantity and condition of accessories.
- When installing, please align all the holes and do not tighten all the screws first.
Is there any broken or missing part?
If yes, please feel free to contact us, we will do our best to assist you to solve the problem as soon as possible.
How to solve the hole misalignment?
Please do not tighten all the screws until aligning all the holes.
INSTALLATION INSTRUCTION
NEED HELP? CONTACT US!
Have product questions? Need technical support? Please feel free to contact us:
This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves clear interpretation of our user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won’t inform you again if there is any technology or software updates on our product
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>