OLIGHT i3T PLUS Slim Pocket Light User Manual

OLIGHT i3T PLUS Slim Pocket Light

Thank you for purchasing this Olight Product. Please read this manual carefully before use and keep it for future reference!

IN THE BOX

• i3T Plus
  

• AAA Alkaline Batteries (Installed Inside The Flashlight)

SPECIFICATIONS

All above specifications are test results based on ANSI/NEMA FL1-2009 Standard.
The tests are performed using the batteries included in the flashlight

INSULATING FILM

Before first use, unscrew the tailcap and remove the insulating film.

BATTERY INSTALLATION

If the batteries need to be replaced, make sure that the positive end of the new batteries face the flashlight head when you put them in.

AVAILABLE BATTERIES

• 2*1.5V AAA alkaline battery (included)
• 2*AAA lithium-iron battery (compatible)
• 2*AAA NiMH battery (compatible)

DANGER

• DO NOT shine the light directly into human eyes. This may cause temporary blindness, or permanent damage to the eyes.
• DO NOT cover the light head when the flashlight is on, or place the flashlight head on the ground. The radiation energy of the flashlight may cause damage to the flashlight itself, or even result in burning to other materials.

WARNING

• Keep out of reach of children.
• If the light is about to be put aside for a long time or be transported, please unscrew the tailcap and remove batteries to cut off the circuit.
• DO NOT use batteries other than the ones mentioned in the “available batteries”, especially rechargeable lithium batteries, otherwise, it could lead to the damage of the flashlight or even result in unexpected disasters.

NOTICE

• Ensure batteries are inserted with the positive (+) end pointing to the head of the flashlight (LED side).
• It is normal for the flashlight to blink when batteries are running out.

EXCLUSION CLAUSE

Olight is not liable for damages or injuries sustained resulting from the usage of the product inconsistent with the warnings in the manual, including but not limited to using the product inconsistent with the recommended lockout mode.

When the light is first turned on, it will go to low as the default mode. Soft press without fully clicking for momentary on. Cycle through momentary low and high mode by quickly soft pressing, letting go, and soft pressing again. Deep press for constant on (you will hear a click). Continue to click on and off within 2 seconds after it was turned off to shift between low and high brightness levels. If it is turned on over 2 seconds after it was switched off, it will go directly to low mode as default again.

EU-DECLARATION OF CONFORMITY

EU-Declaration of Conformity can be found here: https://olightworld.com/ec- declaration

WARRANTY

Within 30 days of purchase:

Contact the original seller for repair or replacement.

Within 5 year of purchase:

Contact Olight for repair or replacement. This warranty does not cover normal wear and tear, modifications, misuse, disintegrations, negligence, accidents, improper maintenance, or repair by anyone other than an authorized retailer or Olight itself.

Dongguan Olight E-Commerce Technology Co., Ltd
4th Floor, Building 4, Kegu Industrial Park,
No 6 Zhongnan Road, Changan Town,
Dongguan City, Guangdong, China.
Made in China

USA Customer Support
cs@olightstore.com
Global Customer Support
customer-service@olightworld.com
Visit www.olightworld.com to see our complete product line of portable illumination tools.

References

• Olight | Illuminate Your World.
• Flashlights, Tactical Light, Outdoor Tools - Olight Official Store- Olight

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>