camry CR 2844 Professional Hair Clipper User Manual

camry CR 2844 Professional Hair Clipper

USING INSTRUCTION

SAFETY CONDITIONS IMPORTANT INSTRUCTIONS ON SAFETY OF USE PLEASE READ CAREFULLY AND KEEP FOR FUTURE REFERENCE
The warranty conditions are different if the device is used for commercial purposes.

1. Before using the product please read carefully and always comply with the following instructions. The manufacturer is not responsible for any damages due to any misuse.
2. The product is only to be used indoors. Do not use the product for any purpose that is not compatible with its application.
3. The applicable voltage is 5V 1A. For safety reasons, it is not appropriate to connect multiple devices to one power outlet.
4. Please be cautious when using around children. Do not let the children to play with the product. Do not let children or people who do not know the device to use it without supervision.
5. WARNING: This device may be used by children over 8 years of age and persons with reduced physical, sensory, or mental capabilities, or persons without experience or knowledge of the device, only under the supervision of a person responsible for their safety, or if they were instructed on the safe use of the device and are aware of the dangers associated with its operation. Children should not play with the device. Cleaning and maintenance of the device should not be carried out by children unless they are over 8 years of age and these activities are carried out under supervision.
6. After you are finished using the product always remember to gently remove the plug from the power outlet holding the outlet with your hand. Never pull the power cable!!!
7. Never put the power cable, the plug or the whole device into the water. Never expose the product to atmospheric conditions such as direct sunlight or rain, etc. Never use the product in humid conditions.
8. Periodically check the power cable condition. If the power cable is damaged the product should be turned to a professional service location to be replaced to avoid hazardous situations.
9. Never use the product with a damaged power cable or if it was dropped or damaged in any other way or if it does not work properly. Do not try to repair the defective product yourself because it can lead to electric shock. Always turn the damaged device to a professional service location to repair it. All the repairs can be done only by authorized service professionals. The repair that was done incorrectly can cause hazardous situations for the user.
10. Never put the product on or close to the hot or warm surfaces or the kitchen appliances like the electric oven or gas burner.
11. Never use the product close to combustibles.
12. Do not let the cord hang over the edge of a counter or touch hot surfaces.
13. Never leave the product connected to the power source without supervision. Even when use is interrupted for a short time, turn it off from the network, and unplug the power.
14. In order to provide additional protection, it is recommended to install a residue current device (RCD) in the power circuit, with a residual current rating of not more than 30 mA. Contact a professional electrician in this matter.
15. If using the device in the bathroom after use remove the power plug from the socket, because water proximity presents a risk, even if the device is turned off.
16. Do not allow the device or power adaptor to wet. If the device falls into water, immediately remove the power plug or power adaptor from the socket. If the device is powered, do not put your hands in the water. Have the device checked by the qualified electrician before using it again.
17. Do not touch the device or power adaptor with wet hands.
18. The device has to be turned off after every use.
19. Do not leave switched-on equipment or adapters without supervision.
20. Never use this device close to water, e.g.: Under the shower, in the bathtub, or above the sink filled with water.
21. If the device utilizes a power adaptor, do not cover it, because this can cause a dangerous temperature rise and can damage the device. Always connect the power adaptor cable to the device, and then connect the power adaptor to the power socket.
22. The cutting scissors are very sharp. Use caution when assembling, dismantling, and cleaning. Do not touch any elements of the moving blade during the operation!
23. DO NOT CHARGE THE BATTERY FOR LONGER THAN 48 HOURS – this can cause irreversible damage to the battery.
24. The charging process should be conducted in temperatures between 5-35 degrees Celsius.
25. Do not wash the blades in water.
26. Only change comb attachments when the device is switched off.

PRODUCT DESCRIPTION

1. Blade
2. On/off button
3. LED display
4. Charging port
5. Comb (3 / 6 / 10 / 13 mm)
6. Cutting head cover
7. Cleaning brush
8. Machine oil
9. USB charging cable
10. Hanging loop

BATTERY CHARGING

To start charging, connect the power cable to the charging socket (4) and the charging cable to the 5V 1A power supply. Then connect the power adapter to a power source. Charging time is about 4 hours. Then the product is fully charged, the working time is about 3 hours.

USING THE MACHINE
Select the desired cutting length using the cutting length adjustment lever: 0.8 / 1.2 / 1.6 / 2.0 mm. You can also attach one of the attachments to the blade. The length adjustment lever can also be used to increase the length. The length shown in the attachments is the length at the lowest setting of 0.8 mm.

Changing the blade

1. Turn off the device.
2. Undo the screws on the old blade and remove the bottom blade from the top moving blade (Picture 5A page 3.) To do this use a Philips star screwdriver.
3. The blade can now be removed for cleaning or replacement.
4. To reassemble, place the new blade so the holes in the blade and the holes in the device are in parallel with each other
5. Reinsert the two screws.
6. Screw them in almost completely. When the blade is screwed on but not tightly please push the blade upwards in the direction of the moving blade so the new blade is level with the moving blade.
7. Tighten the screws fully so that the new blade cannot move.

CLEANING

Clean after each use. Use the included small brush to remove excess hair from the blade. Drop 2-3 drops of machine oil between the moving part of the blade and the stationary part of the blade (Image 2A page 3) and turn it on and off so that the oil can pass between the blades. Clean the housing with a dry cloth.

SPECIFICATION

• Nominal power: 5 W Max: 100 W
• Power : 5V 1A

Please transfer cardboard packaging to waste paper. Pour the polyethylene bags (PE) into the plastic container Worn device should be returned to the appropriate point storage because it is dangerous in the device ingredients may pose a threat to the environment. The electrical device should be handed over to limit its reuse and use. If in the device there are batteries you have to take out and give to the point stored separately.

Different Product

AFTER-SALE SERVICE NOTICE

• If you want to buy spare parts or make any complaints, please contact the seller who issued the receipt directly.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>