baseus PS036 Ultra-Thin Magnetic Phone Cooler User Manual
- June 21, 2024
- Baseus
Table of Contents
baseus PS036 Ultra-Thin Magnetic Phone Cooler
Baseus MagPro II Series Ultra-Thin Magnetic Phone Cooler (with Wireless Charger) Cosmic Black
User Manual
- Before using the product, thoroughly read this manual.
- Keep the manual for future reference.
Overview
Installation & Operation Instructions
-
Installation
Attach the cooler to the back of the phone and connect to a power supply. -
Start the Cooler
Press the power button to start the cooler as default settings: wireless charging and cooling function on at the same time.
Button Functions
ON/OFF Button
- Press the power button to switch the color of the ambient light: iridescent-red-orange-yellow-green-blue-indigo-purple.
- Press and hold the power button: when the ambient light is off, press and hold the power button for 2s to turn it on, and vice versa.
Toggle Switch
- Turn on the wireless charging function.
- Turn on the cooling function.
- Turn on the wireless charging and cooling function at the same time.
Product Specifications
- Name: Baseus MagPro II Series Ultra-Thin Magnetic Phone Cooler (with Wireless Charger) Cosmic Black
- Model No.: BS-PS036
- Input: 5V-2A;9V-3A;12V-3A;15V-3A(MAX.)
- Output: 5W/7.5W/10W/15W
- Transmission Frequency: 115-205KHZ 360-365KHZ
- Total Output: 15W
Package Content
- Metal ring sticker X 1, cable X1, user manual X1
Attention
- Recommend to use a 36W or higher PD adapter to power this product for optimal user experience.
- When the cooler is working, the back temperature may decrease, causing the surrounding hot air to condense and form water droplets. This is normal, please feel at ease to use it.
- DO NOT attempt to personally disassemble, repair, or modify the product under any circumstance, otherwise, it may cause danger or injury to yourself resulting from eletric shock or fire.
- Keep the product safe from any impact, and DO NOT throw it into fire.
- DO NOT use the product in extreme environments with high temperatures, humidities, or corrosions, for it may cause damage to the circuit board and lead to electric leakage.
- Please keep water or any other fluids out of this product during operation. Please make sure the power is off when you clean the product with water.
- Keep the product out of the reach of children.
- Please make sure the air outlet and inlet are unobstructed during use, and avoid putting your fingers or other objects into the cooling fan.
This symbol indicates that this product shall not be treated as household waste. Instead, it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. Follow local rules and never dispose of the product with normal household waste.
The following importer is the responsible party.
- Company Name: BASEUS TECHNOLOGY (US) INC
- Address: 421 S BROOKHURST ST SUITE 1312 ANAHEIM, CA 92804
- Telephone: 6145412699
FCC STATEMENT
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Note:
This equipment has been tested and found to comply with the limits for a Class
B digital device, under Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency
energy, and if not installed and used under the instructions, may cause
harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
To maintain compliance with FCC’s RF exposure guidelines, this equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.
Shenzhen Baseus Technology Co., Ltd. declares that the product complies with Directive 2014/53/EU. The full text of the EU Declaration of Conformity is available at the following internet address: https://www.eu.baseus.com. This product can be used across EU member states.
Made in china.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>