AGA GA-ONE Acoustic Guitar Amplifier Instruction Manual
- June 21, 2024
- AGA
Table of Contents
AGA GA-ONE Acoustic Guitar Amplifier Instruction Manual
Function introduction
- BASS:Adjust the bass audio function of the instrument.
- TREBLE: Adjust instrumenteble audio function.
- REVERB: The first half adjusts the reverb funciion of the instrument room, and the second half adjusts the reverb function of the instrument hal. \
- CHORUS/DELAY:The first half adjusts the chorus function of the instrument, and the second half adjusts the delay function of the nstrument.
- VOLUME:Agjust the total volume.
- POWER:
(1)Power on: the main switch with blue ight, ong press 2 seconds to turn on,
the blue lightis on; Press and hold for 2 seconds (o shut down. the indicator
is o, Al low power, the biue light blinks slowy.
(2)Turn on Bluotaoth: When the speaker is on, press the power button to turn
on Biuetooth, the Bluetaoth indicator will fash, and the Bluetooth indicator
will be on afté the pairing s successful. Press the power buton again to tur|
offthe
Bluetooth and turn of the indicalor ight,
(3)Blustooth audio connection: After Bluetooth i turned on, the Blustooth
funciion of the mobile phone can be used {o pair wilh the speaker (o play
audio.
When Blustooth audio s played, only the main volume knob can adjust the
volume, and other knobs are invalid for Blustaoth audio 7.04:Bluetooth prompt
ight When not paired. the Blustooth indicator flashes;
The pairing i successful. The indicator is on 5. B :Charging indicator light
when charging, the charging indicator lightis groen. and whenitis fuil. the
ndicator ight s off. 9.(1)DC-5V:DC-5V inpult port, using the 5V2A charging
head to charge the speaker. (2) OTG: OTG live/recording interface (dual Type-C
header cable is recommended) 10.AUXIN:Adjusthe recording funcion. 41,3
Headphone oulel. 12.INPUT:6.35 Instrument audio Input.
Performance introduction
‘Speaker: 3 “bass +1.6 treble ‘Speaker maximum power: 3in 10W+ 1.6in 5W.
Blustooth: Bluctooth version:
Blustooth V5.0 Froquency range: 2 402GHZ-2 480GHZ Gommunication istance:
suaight e > =1omi Support system:Anaroid/iOSindow
Transmission powr:ax Scbm Pair name Batten Capacily: Two 18650 batteries with
protection plate. Rated voltage :7.4V Quaniity: 2 sections
Time 2.5 hours. Iniow power, ican e used. 30 miniss 0% volume can be used
continuously: about 4-5 hol (Note’ 1 not used fora 1on tme. please charge and
sischarge the product
Matters needing attention
normal phenomenan, Whanclaning the machine, turn of the power supply and
disconnect alextarnal power connecions
Use an antistaticcloth toclean and wipe the entire machine. Do not use
chemical Substances (such as alconal and banzene). chemical etergant, or
abrasive cloaning agent
Please kasp this productas dy as possible and do not usa this unitn an overly
humid enviranmnt Please use the accsssories approved by the company. do not
disassemble the machine without authorizatin, oherwise you can not enjoy the
company’sfree warraniy service. Safety warnings and prohibitons. ‘A For
correct and safe use, lasse read this safety notice carefuly ‘ Inthe place
whora the Use of fadio aquipment s prohited or he use of the machine will
cause inteierence and salety isks ofolher electronic eauipment. please turn
off he power supply of the machine. .Inplaces marked with nflammable and
explosive signs, please do not use the machine and turm of the power supply of
the machine. .00 101 go near ne i
Use an anistatcclo o clean and wipe the entire machine. Do not use chertical
sublances (such 43 alcahol and benzens). chemical detergent, o abrasive
cleaning agent Plaass keep (s proguct as dry as possible and do not use this
uitn an overly humid snvironment This speaker has the characteristics
ofightweight and portable, can be Used i indoor and outdoo! performance, has a
wealt of imbre and Sound adjusiment, as wel as Buetaolh ccompaniment
performance The headset playback funciion can be used for quit pracice, which
can be used by professionals or enthusiasts
FCC Statement
“This device camplies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection ‘against harmful interference in a residential instalation
“This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio commurications. However, there is no guarantee that interference will not occur ina partcular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turing the equipment off and on, the user s encouraged to try to correct the interference by one or more of the following measures “Reorient or relocate the receiving antenna. “Increase the separation between the equipment and receiver. ~Connect the equipment into an outlet on a circut diferent from that to whichthe receiver is connected ~Consult the dealer or an experienced radio/TV technician for help. ‘The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction