LANCOM LCOS LMC Management Cloud Installation Guide
- June 20, 2024
- LANCOM
Table of Contents
LANCOM LCOS LMC Management Cloud Installation Guide
Copyright
© 2023 LANCOM Systems GmbH, Wuerselen (Germany). All rights reserved. While
the information in this manual has been compiled with great care, it may not
be deemed an assurance of product characteristics. LANCOM Systems shall be
liable only to the degree specified in the terms of sale and delivery. The
reproduction and distribution of the documentation and software supplied with
this product and the use of its contents is subject to written authorization
from LANCOM Systems. We reserve the right to make any alterations that arise
as the result of technical development.
Windows® and Microsoft® are registered trademarks of Microsoft, Corp. LANCOM,
LANCOM Systems, LCOS, LANcommunity and Hyper Integration are registered
trademarks. All other names or descriptions used may be trademarks or
registered trademarks of their owners. This document contains statements
relating to future products and their attributes. LANCOM Systems reserves the
right to change these without notice. No liability for technical errors and /
or omissions.
Products from LANCOM Systems include software developed by the “OpenSSL
Project” for use in the “OpenSSL Toolkit”
(www.openssl.org). Products from LANCOM Systems
include cryptographic software written by Eric Young
(eay@cryptsoft.com).
Products from LANCOM Systems include software developed by the NetBSD
Foundation, Inc. and its contributors.
Products from LANCOM Systems contain the LZMA SDK developed by Igor Pavlov.
The product contains separate components which, as so-called open source
software, are subject to their own licenses, in particular the General Public
License (GPL). If required by the respective license, source files for the
affected software components are made available on request. To do this, please
send an e-mail to gpl@lancom.de .
LANCOM Systems GmbH
A Rohde & Schwarz Company
Adenauerstr. 20/B2
52146 Wuerselen | Germany
info@lancom.de | lancom-systems.com
Configuration via the LANCOM Management Cloud
In order to configure a LANCOM device via the LANCOM Management Cloud (LMC), it must first be integrated into the LMC.
Integrating the device into the LMC requires the device to be connected to the Internet and able to reach cloud.lancom.de. If a router that is intended to provide Internet access is to be integrated into the LMC, the first step is to perform a basic configuration and to configure an Internet connection.
There are several different methods of integrating a LANCOM device into the
LANCOM Management Cloud:
→ Integration into the LANCOM Management Cloud by serial number and Cloud PIN
→ Integration into the LMC by LMC Rollout Assistant
→ Integration into the LANCOM Management Cloud by activation code
Integration into the LMC by serial number and Cloud PIN
You can easily add your new device to a project in the LANCOM Management Cloud (Public). You will need the serial number of the device and the associated Cloud PIN. You can find the serial number on the bottom of the device or in LANconfig or WEBconfig. The Cloud PIN can be found on the Cloud-ready flyer, supplied with the device.
In the LANCOM Management Cloud, open the Devices view and click Add new device , then select the desired method, here Serial number and PIN.
In the next window, enter the serial number and Cloud PIN of the device. Then confirm with the button Add new device.
The next time the LANCOM device has contact with the LANCOM Management Cloud (Public), it will be paired automatically.
Integration into the LMC by LMC Rollout Assistant
The Rollout Assistant is a web application. It uses a device equipped with a
camera and Internet access, such as a smartphone, tablet or notebook, to read
the serial number and PIN. It offers an extremely easy way to connect the
device to the LMC.
To start the Rollout Assistant, just enter the URL
cloud.lancom.de/rollout into a browser. The
Rollout Assistant opens with this login screen:
You select the desired language and login to the LMC using your credentials. On the next page, you select the project that new devices are added to. Do this by tapping the green button and scanning the serial number. The Rollout Assistant may request access to the camera on the device to do this. You scan the serial number either on the underside of the device or alternatively from the barcode on the packaging box. Otherwise, you can enter the serial number manually.
Next, scan the cloud PIN from the information sheet enclosed with the device.
Here, too, you have the option of entering the PIN manually. Now you can
select one of the locations available in the project, or optionally use No
location to leave this item open. Bear in mind that the location is an
important setting for the configuration by SDN (Software-defined Net-
working).
In the next step, you assign various properties to the device. You give the
device a name, enter an address, and take a photo of the installation. The
address can be determined with the GPS information from your device. In the
final step, the information is displayed once again for checking. If you find
any errors, simply go back and correct the corresponding entry.
Click or tap add device to pair the device with the LMC. You will
immediately see it in your project and can make other settings if necessary.
As soon as you connect the device and it connects with the LMC, it is
provisioned with an initial operating configuration based on the SDN settings,
and the status changes to “online”.
Integration into the LMC by activation code
This method uses LANconfig and just a few steps to integrate one or more LANCOM devices simultaneously into the LANCOM Management Cloud.
Create an activation code
In the LANCOM Management Cloud, open the Devices view and click Add new
device , then select the desired method, here Activation code.
Create an activation code by following the instructions in the dialog. This activation code allows you to integrate the LANCOM device into this project at a later time.
The Activation code button displays all of the activation codes for this project in the Devices view.
Using the activation code
Open LANconfig and select the desired device or devices and click the Cloud
icon in the menu bar.
In the dialog window that opens, enter the activation code that you generated previously and click the button OK.
If you copied an activation code to the clipboard, it is automatically entered into the field.
Once the device is paired with the LANCOM Management Cloud, it is available in the project for further configuration.
Zero-touch & auto configuration
A LANCOM device in its factory settings will initially try to contact the LMC.
If it succeeds, i.e. the device has Internet access, then the LMC can check
whether the device is already assigned to a project. In this case, it rolls
out the auto-configuration created by software-defined networking (SDN) to the
device.
If the location has an upstream Internet router with an activated DHCP server,
a gateway with a dedicated WAN Ethernet port, such as a LANCOM 1900EF, can be
connected to this and automatically has access to the LMC. Another possibility
here are the xDSL connections from certain providers that provide dial-in
without authentication (BNG).
This eliminates the basic configuration and the router immediately receives
the correct configuration. What this means is that you do not actually have to
carry out any on-site configuration of the access points, switches and (if
applicable) the router, i.e. “zero touch” for the administrator.
If necessary, switch off the automatic contact attempts to the LMC in
LANconfig or WEBconfig under Management > LMC.
Installation Guide – LMC device integration (LCOS & LCOS LX) LANCOM, LANCOM Systems, LCOS, LANcommunity and Hyper Integration are registered trademarks. All other names or descriptions used may be trademarks or registered trademarks of their owners. This document contains statements relating to future products and their attributes. LANCOM Systems reserves the right to change these without notice. No liability for technical errors and / or omissions. 12/2023
LANCOM Systems GmbH A Rohde & Schwarz Company Adenauerstr. 20/B2 52146
Wuerselen Germany
info@lancom.de | lancom-systems.com
References
- LANCOM Management Cloud
- LMC Rollout
- Business network solutions "engineered in Germany": LANCOM Systems GmbH
- /index.html
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>