basalte 0610-02 Puck USB Power Supply Instruction Manual
- June 9, 2024
- basalte
Table of Contents
PUCK
Installation Manual
0610-02 Puck USB Power Supply
Before operating the unit, please read this manual thoroughly and retain it
for future reference.
Model No. 0610-02 Puck 12-24V DC-2A
Model No. 0610-03 Puck 12-24V DC-3A
You are cautioned that any changes or modifications not expressly approved in
this manual could void your authority to operate this equipment.
Description
Basalte Puck is a USB power supply providing 5.2V DC power. Puck has a standard USB-A connector.
How to start up
Connect Puck to a DC power supply between 10V and 30V DC.
The cable between the DC power supply and the Puck must have a cable section of at least 0.8mm2 and maximum 1.5mm2. The applicable maximum cable lengths are specified below:
| cable type | 12V DC | 24V DC |
|---|---|---|
| 0.8mm2 (AWG 19) | 50m (164ft) | 300m (984ft) |
| 1.0mm2 (AWG 18) | 60m (197ft) | 400m (1312ft) |
| 1.5mm2 (AWG 17) | 90m (295ft) | 500m (1640 ft) |
Remarks
in order to limit power loss in the cable, we recommend using a star wiring
from the power supply to each single Puck.
Please do not install Puck in cascade since this will lead to high current and
power dropping in the connection cable.
We advise to put the iPad/iPod in automatically standby mode when not in use
to reduce power consumption.
Technical data
Input Power: 12-30V DC
Output Power: 2A @ 5.4V (0610-02)
3A @ 5.4V (0610-03)
Ambient temperature:
Operation: -5°C to 45°C
Storage: -15°C to 55°C
Transport: -15°C to 55°C
Max. humidity: 93% relative humidity, no moisture condensation.
Protection class: II
Type of protection: IP 20
Certification: CE
**** basalte bv | fraterstraat 37B | 9820 merelbeke | belgium
t +32 (0)9 385 78 38 | f +32 (0)9 329 66 95 |
www.basalte.be |
info@basalte.be
© 2022
basalte v1.0
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>