The Home Depot LT3305-BWN Elephant Table Lamp Instruction Manual
- June 1, 2024
- THE HOME DEPOT
Table of Contents
The Home Depot LT3305-BWN Elephant Table Lamp
Specifications:
- Product: Elephant Table Lamp
- Power: Requires 1x60W Type A Medium Base Bulb (not
included)
Product Usage Instructions
- Carefully remove all parts from the carton.
- Gently pull the cord from the bottom of the lamp until the Socket Assembly (B) is close enough to screw into Base (A).
- Screw Socket Assembly (B) Counter Clockwise until tight against Base (A).
- Place Harp (D) into Saddle (C).
- Place Shade (E) onto Harp (D) and secure in place with Finial (F).
- Screw in a light bulb into the lamp.
- Enjoy your Elephant Table Lamp!
Cleaning & Maintenance:
- Unplug the fixture before cleaning.
- Use a clean, dry, soft, lint-free cloth.
- Do not use water or other chemical cleaning agents.
FAQ
- Q: What type of bulb does the lamp require?
- A: The lamp requires a 1x60W Type A Medium Base Bulb (not included).
- Q: How do I clean the lamp?
- A: Unplug the lamp before cleaning and use a clean, dry, soft, lint-free cloth. Avoid using water or chemical cleaning agents.
- Q: Can I use a higher-wattage bulb than recommended?
- A: It is not recommended to use a higher wattage bulb than specified as it may damage the lamp.
Questions?
E-mail our customer service department at
Product Overview
IMPORTANT SAFETY INSTRUCTIONS
This portable lamp has a polarized plug (one blade is wider than the other). As a safety feature to reduce the risk of electrical shock and fire, this plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Never use with an extension cord unless the plug can be fully inserted. Do not alter this safety feature. This lamp is for indoor use only. The lamp should not be used near water. Never immerse the lamp in water or other liquids. Never cover the lamp with any object including cloth or paper as this is a fire hazard. Do not handle the bulb immediately after the light is turned off as it will be hot. This is not a toy.
ASSEMBLY INSTRUCTIONS
- Carefully remove all parts from the carton.
- Gently pull the cord from the bottom of the lamp until the Socket Assembly (B) is close enough to screw into Base (A)
- Screw Socket Assembly (B) Counter Clockwise until tight against Base (A)
- Place Harp (D) into Saddle (C)
- Place Shade (E) onto Harp (D) and secure in place with FInial (F)
- Screw in light bulb into the lamp and enjoy!
CLEANING & MAINTENANCE
- Unplug the fixture before cleaning.
- Use a clean, dry, soft, lint-free cloth.
- Do not use water or other chemical cleaning agents.
Requires 1x60W Type A Medium Base Bulb (not included)
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>