BaByliss E756E Hair Clipper Instruction Manual
- June 19, 2024
- BaByliss
Table of Contents
BaByliss E756E Hair Clipper Instruction Manual
E756E
Please carefully read the safety instructions before using the product.
PREPARATION
- Always inspect the appliance before use to ensure the clipper blades are free from hair, debris
- For best performance, use on clean, dry hair that has been combed until tangle-free.
NOTE: The product should not be used for longer than 20 minutes when operated from the mains.
USE
Ensure the clipper switch is in the OFF position. Plug it into the mains and switch ON.
Using the Comb Guides
- To attach a comb guide, ensure the appliance is switched Slide the cutting blades of the clip- per under the slot in the rear of the teeth of the cutter guide and snap the clip on the bottom of the guide over the bottom edge of the fixed clip- per blade.
- To remove the comb guide, ensure the appliance is switched off. Push the tab on the rear of the comb guide away from the head and lift
- This product is supplied with 8 comb guides, each one is
| Cutting Length | Grade |
|---|---|
| 3mm | #1 |
| 6mm | #2 |
| 9.5mm | #3 |
| 13mm | #4 |
| 16mm | #5 |
| 19mm | #6 |
| 22mm | #7 |
| 25mm | #8 |
CLEANING AND MAINTENANCE
To maintain optimum performance, the appliance should be cleaned after each use.
- Switch the appliance off and unplug at the mains
- Remove any comb guides. Rinse the comb guide under the running water and dry thoroughly be- fore storage or
Removable Blades ****
To make cleaning easier, the BaBylissMEN clipper blades can be removed.
- Make sure that the trimmer is off and remove the cutting
- Hold the clippers with the blades pointing up and remove them by pressing the points (Fig. 1).
- Carefully brush the blades using the cleaning brush to remove the
- Rinse the blades under water without immersing the
After cleaning, switch the appliance on, and oil the blades by adding a few drops of the oil supplied over the blades. Only use the lubricating oil sup- plied with this appliance as this is specifically for- mulated for high speed clippers and does not eva- porate or slow the blades.
Read More About This Manual & Download PDF:
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>