MAXXUS Olympic Incline Bench Biaohan Instruction Manual

MAXXUS Olympic Incline Bench Biaohan

Specifications:

• Product: Incline Bench with Safety Bars Pro
• Language: English

Product Information:

The Incline Bench with Safety Bars Pro is a versatile workout bench designed for strength training exercises. It comes with safety bars for added security during workouts, ensuring a safe training environment.

Maintenance:

Regularly clean and lubricate the equipment to ensure optimum performance. Check and tighten fixing materials to maintain safety during use.

Disposal:

Properly dispose of the equipment at a communal waste disposal facility or a registered waste disposal company. Do not dispose of it in regular household rubbish.

FAQ

Q: How often should I clean and lubricate the equipment?

A: It is recommended to clean and lubricate the equipment regularly to ensure smooth operation. Depending on usage, aim for maintenance at least once a month.

© 2023 by MAXXUS Group GmbH & Co. KG All rights reserved This publication may not be reproduced, stored in retrieval system, or transmitted on whole or in part, in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of Maxxus Group GmbH & Co. KG. Errors, colour and technical modi-fication subject to change, reproduction as well as electronic duplication only with written permission of MAXXUS Group GmbH & Co. KG

Safety Instructions

Please read and observe all sections of this Operating Manual. Thorough attention should be paid to the safety, service and maintenance instructions and to the training information at all times. Please ensure that anyone using the training device is equally familiar with these instructions and that they follow them. Keep this manual in a safe place for further reference on information, maintenance and cleaning and for details on ordering of spare parts. It is very important strictly to follow the service and maintenance and safety instructions contained in this Manual. This training device is only to be used for its intended purpose. This means it is to be used for body workouts by adults only. If this equipment is used for any other purposes than intended, there is a possible risk of accident, damage to health or damage to the training device. The Distributor cannot be held responsible for damages caused by improper use.

Training Environment

• Select a suitable space for your training device to provide an optimum amount of free space and highest level of safety.
• Ensure that the load capacity of the floor or ground of the chosen area is sufficient for the load. − Make sure that the area is well ventilated and that an optimum amount of oxygen is available during training. Avoid draughts. − It is not permitted to locate your training device in busy areas or areas near to main walkways (emergency exits, doors or passageways)
• Your training device is not suitable for outside use and so storage and training can only take place in a temperate, dry clean room. − Operation and storage of your training device in wet areas such as in swimming pools, saunas etc. is not possible. − Make sure that your training device is kept on flat, hard and clean ground both in operation and at standstill. Any uneven surfaces must be removed or made good. − It is recommended that a floor covering (carpet, mat, etc.) should be placed under the device to protect damageable floors such as wood, laminates, floor tiles etc. We recommend placing MAXXUS® floor protection mats permanently under the device. Please ensure that these mats cannot slip or slide. − Do not put this training device on pale or white coloured carpets or rugs as the feet of the device may leave marks. − Make sure that your training device is kept out of contact with hot items and is kept at a safe distance from any sources of heat e.g. central heating, hot stoves, furnaces, ovens or open fires.

Personal Safety Instructions for Training

• You should go to the doctor and have a health check before you start working out.
• Stop training immediately if you feel physically unwell or are experiencing any breathing difficulties.
• Always start your training session at a low workload increasing it slowly but steadily throughout. Reduce the workload again towards the end of your training session.
• Suitable sports shoes and clothes should always be worn during training sessions. Make sure that loose clothes do not get caught up in any moving parts of the device.
• Your training device is only to be used by one person at a time.
• Check each time before a training session to see if your device is in perfect condition. Never use your training device if it is faulty or defective.
• You are only permitted to carry out repairs to the device yourself after having contacted our Service Department and on receipt of explicit permission to do so. Only original spare parts may be used at any time.
• Improper repairs or structural modifications (attachment of non-permissible parts, removal of original parts etc) are not permitted. This can impair the technical safety of the device and cause risk for the user.
• Your training device must be cleaned after each use. Remove all dirt including body sweat or any other liquids.
• Your training device is not suitable for use by children.
• Third parties, especially children and animals, must be kept at an appropriate safety distance during training.
• Check before each training session if there are any items underneath the training device and remove them without fail. Never use the training device when items are underneath it.
• Do not allow children to use your training device as a toy or climbing frame at any time.
• Ensure that no body parts of your own or of third parties ever come into contact with any of the moving mechanisms.
• Warn anyone present at your training sessions, especially children, of the possible risk. This applies to the areas where weight plates, weight stacks or barbells.
• Check all parts at regular intervals (at least once a month) and make sure that all screws and nuts are tightened properly

The construction of this training device is based on state of the art technology and highest modern technical safety standards. This training device is to be used by adults only! Extreme misuse and/or unplanned training can cause damage to your health! Any manipulation of or interference with the device can cause damage to the device and be a danger to people. If you have any questions or queries contact your specialist dealer or the MAXXUS Service Team and they will be pleased to help you further.

Assembly

• Assembly Step 1
  Lock Pre-assembled part assembly (A) and Pre-assembled part assembly (B) into Pre-assembled part assembly (C) well with 3pcs External hexagon screw M10*75 (No.12) 6pcs Flat washer φ10 (No.17) and 3pcs Locking nut M10 (No.19) as shown in the picture.

• Assembly Step 2
  Lock Pre-assembled part assembly (D) into Pre-assembled part assembly (A) and Pre-assembled part assembly (B) respectively with 2pcs Adjustable foot pad (No.32) 4pcs External hexagon screw M10*60 (No.11) 8pcs Flat washer φ10 (No.17) and 4pcs Locking nut M10 (No.19) as shown in the picture.

• Assembly Step 3
  Lock Back cushion (No.8) and Head cushion (No.9) into Pre-assembled part assembly (C) well with 1pc External hexagon screw M860 (No.15) 6pcs External hexagon screw M820 (No.14) and 7pcs Flat washer φ8 (No.16) as shown in the picture.

• Assembly Step 4
  Lock Seat cushion (No.7) into Pre-assembled part assembly (E) with 3pcs External hexagon screw M8*20 (No.14) and 3pcs Flat washer φ8 (No.16). Then, insert Pre-assembled part assembly (E) into the hole of Pre-assembled part assembly (C) and lock well with M16 Elastic bolt (No.36) that pre-assembled as shown in the picture.

• Assembly Step 5
  Lock 2pcs of Pre-assembled part assembly (F) into Pre-assembled part assembly (A) and Pre-assembled part assembly (B) respectively with 2pcs External hexagon screw M10*100 (No13), 8pcs Arced washer φ10 (No.18) and 4pcs Locking nut M10 (No.19) as shown in the picture.

• Assembly Step 6
  Insert Spring clamp (φ50) (No.10) into Hang barbell rod tube assembly (No.25) as shown in the picture.

Care, Cleaning & Maintenance

Cleaning
Clean the training device each time after training with a damp cloth to remove any sweat and or liquids. Do not use solvents. Dry off the cleaned areas thoroughly. Regular cleaning helps to keep your device in good condition and therefore also significantly contributes to the length of its service life. The costs of repairing a training device which has not been properly maintained will not be covered in any way by the warranty. Also clean the traction cables regularly.

Cleaning and Lubricating the Chrome Guide
Pipes The barbell bar guide pipes must also be cleaned and lubricated regularly to guarantee optimum smooth running. To achieve this clean the guide pipes with a damp cloth and some liquid soap or washing up liquid. Alternatively, you can use the MAXXUS® degreaser spray (optionally available). After this, dry the guide pipes off thoroughly and lubricate them with MAXXUS® lubricant spray (optionally available) leaving a thin film on the surface. With regular use you should lubricate the guide pipes once a month. If squeaking noises occur during training the pipes require lubricating immediately. MAXXUS® degreaser and lubricating sprays are available from our Online Shop at www. maxxus.de or from our Showrooms in Groß-Gerau.

Maintenance
Checking the Fixing Materials
At least 1 x Monthly you must check that the screws and nuts are tightened securely and tighten them if necessary

Disposal

This device is recyclable. At the end of its service life you must dispose of it properly. Do not dispose the device in the normal household rubbish.
Dissee curden te gulations which way disordial ta in do ta see arice as dour sal government.
office or county council as to where you can dispose of the device properly and in an environmentally sound manner.

Recommended Accessories

These accessories are best suited for use with your training device. All products are available from our online shop at www.iconic.com or direct from our showroom

• MAXXUS® Floor Protection Mats Due to its extreme density and material thickness of 0.5 cm and 1.2 cm, these mats provide perfect protection for floors and floor coverings against damaging, scratches and soiling through body sweat. Noise caused by running and movement is significantly reduced. Available in the following sizes:

  • 160 x 90 cm – thickness 0.5 cm
  • 210 x 100 cm – thickness 0.5 cm
  • 100 x 100 cm – thickness 1.2 cm

• MAXXUS® Degreaser Spray – Optimum cleaner for cleaning off dirt and maintaining the guide pipes and roller surfaces.

• MAXXUS® Lubricating Spray – Optimum lubrication for guide pipes.

• MAXXUS® Anti-Static Spray – Effective against the static charges created in frames, clothing and training computers. Devices which are located on carpets or synthetic floors will become statically charged. MAXXUS ® Anti-Static Spray will deter this. Synthetic surfaces treated with MAXXUS® Anti-Static Spray do not attract dust as quickly and will remain clean for longer.

• MAXXUS® Special Foam Cleaner – Use for regular cleaning of your training device.
  Plastic covers and metal frames can be easily cleaned and perfectly maintained with

• MAXXUS ® Special Foam Cleaner. It is also suitable for cleaning pulse belts and other training accessories.

Training Recommendations

Preparation Before Training
Before you start training make sure that not only your training device is in perfect condition, your body must also be prepared for training. Therefore, if you have not done any endurance training for some time, you should consult your GP and undergo a fitness check-up. Also discuss your training target; they will certainly be able to give you valuable advice and information. This applies to people who are over 35, have problems with overweight, heart or circulatory system problems.

Training Plan
Essential to effective, target orientated, and motivating training is to have a forward-looking trainings plan.
Plan your fitness training as an integral part of your daily routine. If you don’t have a fixed plan, training can easily interfere with regular commitments or continually be put off to another unspecified time.
If possible, create a long term monthly plan and not just from day to day or week to week. A training plan should also include sufficient motivation and distraction during training sessions. An ideal distraction is to watch TV during training as this diverts your attention both visually and acoustically. Make sure that you reward yourself and set realistic targets such as to losing 1 or 2kgs in four weeks or to increase your train- ing time by 10 minutes within two weeks for example. If you reach your targets, then reward yourself with a favourite meal which you have not allowed yourself till then.

Warm-Up Before Training
Warm-up on your training device for 3-5 minutes at minimum resistance. This will best prepare your body for the up-coming exertion in training.

Cool-Down After Training
Do not just get off your training device immediately the training session is finished. Like with the warm-up stage you should continue for 3-5 minutes at minimum resistance to cool down. After training you should stretch your muscles thoroughly.

• Front Thigh Muscles
  Support yourself with your right hand against the wall or on your training device.
  Bend your knee and raise your left foot backwards so you can hold it with your left hand. Your knee should be pointing straight down to the floor. Pull your leg backwards until you feel a light pulling in your thigh muscles. Hold this position for 10 to 15 seconds. Let your foot go and stand it back on the floor. Repeat the exercise with your right leg.

• Inner Thigh Muscles
  Sit on the floor. Pull the soles of your feet together in front of you raising your knees slightly. Grasp the upper sides of your feet and place your elbows on your thighs. Press your thighs down towards the floor with your arms until you feel a light pulling in your thigh muscles. Hold this position for 10 to 15 seconds. Make sure to keep your upper body straight throughout the exercise. Release the pressure from your thighs and slowly stretch out your legs to the front. Stand up slowly steadily.

• Legs, Calves and Buttocks
  Sit on the floor. Stretch out your right leg and bend your left leg to place the sole of your foot on your right thigh. Bend your top body over so you can stretch out your right hand to touch your right toes. Hold this position for 10 to 15 seconds. Let go of your toes and sit slowly and steadily up straight again. Repeat this exercise with your left leg.

• Leg and Lower Back Muscles
  Sit on the floor with your legs stretched out. Stretch forward with your hands and try to grasp the tips of your toes with both hands. Hold this position for 10 to 15 seconds. Let go of your toes and slowly and steadily sit back up straight again.

• Intake of Liquids
  The intake of sufficient liquids before and during training is vital. During a 60-minute training session it is possible to lose up to 0.5 litres of liquid. To compensate for this loss, you can drink a mix of one third apple juice to two thirds water to replace all electrolytes and minerals which your body loses through sweat. 30 minutes before you begin training you should drink approx. 330 ml. Make sure that you take in enough liquids during training.

• Training Frequency
  Experts recommend doing weight training 3 to 4 days a week. You will of course reach your training target quicker if you train more regularly.
  Make sure that you allow for sufficient breaks in your training plan to give your body time to recover and regenerate. After each training session you should take at least a one-day break. The rule of “less is often more” even applies to fitness and weight training!

• Trainings Records
  To optimise your training and make it as effective as possible you should work out a training plan, before you start training, which you either write down or create a table for in your computer. Here you should make a record of training session and how you feel during the training session.
  Here is a recommended weekly plan.

• Rep. = Repetition
  Explanation of Terms:
  Weight training exercises are usually made up of three or four training sequences. Each training sequence is normally made up of 10 to 12 repetitions of an exercise. At the end of each training sequence you should have a 1 to 2-minute recovery break. Normally the weights used in training are increased from sequence to sequence.

• A Training Session could be as follows:
  1. Training Sequence – Training Weight 20 kg – 10 Repetitions

• Break 1 Minute
  2. Training Sequence – Training Weight 25 kg – 10 Repetitions

• Break 1 Minute
  3. Training Sequence – Training Weight 30 kg – 10 Repetitions

• Break 1 Minute
  4. Training Sequence – Training Weight 35 kg – 10 Repetitions
  Break 1 Minute

Parts List

Pre-assembled parts

Exploded Drawing

Warranty*

For MAXXUS® Support Team to help you as quickly as possible with service, we will require certain information
about your fitness device and about you. To find the exact spare parts required, we will need the product name, date
of purchase and serial number. If necessary, please fill out completely the Repairs Contract/Damage Report form attached to this User Manual and send it to us by post or by fax.

Areas of Application & Warranty Periods
Depending on the model, fitness devices from MAXXUS® are suitable for use in different areas. Find the appropriate area of use for your fitness device from the “Technical Data” in this User Manual.

Home Use:
Exclusively for private use
Warranty Period: 2 Years

Semi-Professional Use:
Use under instruction in hotels, physiotherapy practices, etc.
Use in a fitness studio or similar establishment is hereby excluded!
Warranty Period: 1 Year

Professional Use:
Use in a fitness studio or similar establishment under supervision by trained personnel.
Warranty Period: 1 Year
Use of your training device in an area which is not suitable for your device will cause immediate expiry of its guarantee and cancel your right to claim warranty!
Sole private use and warranty period of 2 years assumes that the purchase invoice is made out to the end user.

Proof of Purchase and Serial Number
To claim your right to service works within the warranty period we will in each case require proof of purchase. Keep your proof or purchase or purchase invoice in a safe place and in warranty cases send us a copy together with your Repairs Contract/Damage Notification. This will ensure that we can process the service work as quickly as possible. So that we can identify which model version requires to be serviced correctly, we will require; Product Name, Serial Number and Date of Purchase.Number and Date of Purchase.

Terms and Conditions of Warranty:
The warranty period for your training device starts on the date of purchase and applies solely to products which were purchased directly from the MAXXUS Group GmbH & Co. KG, or one of the MAXXUS Group GmbH & Co. KG direct and authorised distribution partners.
The warranty covers defects caused by production or material faults and only applies to devices purchased in Germany. The warranty does not apply to damages or defects caused by culpable improper use, negligent or purposeful destruc-tion, lack or failure to carry out maintenance and/or cleaning measures, force majeure, operational causes and to normal wear and tear, damages caused by penetration of liquids, damage caused by repairs or modifications made with spare parts from a different supplier. The warranty also does not apply for damages due to faulty assembly or damages which occur because of faulty assembly. Certain component parts will wear out during use or from normal wear and tear. This includes for example:

• Cables
• Rollers
• Bearings

Signs of wear and tear on wearing parts are not items covered under the warranty.
If your training device requires to be collected from your address, you will be required to dismantle and make available the device and receive and re- assemble the device yourself. These works are not in any way covered by the warranty. Prior to sending any component parts to our service address, please contact the service department and ensure the parts are well packed.

Service Outside the Warranty and Ordering Spare Parts
The MAXXUS® Service Team is happy to be of assistance to help solve any problems with faults which may arise following expiry of the warranty period, or in cases of defects arising which are not covered by the warranty.
In this case please contact us by email direct to: [email protected]
Orders for Spare Parts or Worn Parts should be sent along with information on the Product Name, spare part description and number and the quantity required to: [email protected]
Please be informed that additional fixing materials such as screws, bolts, washers etc are not included in the scope of delivery for component spare parts. These should be ordered separately.
*Version: Juni/2016

Repairs Contract / Notification of a Damage Claim

Maxxus Group GmbH & Co. KG Nordring 80 w D-64521 Groß-Gerau
E-Mail: [email protected]
www.maxxus.com

References

• Iconic.com - Hilco Digital Assets

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>