OSALIS WaxBath Pro Therapy Heated Paraffin Wax Bath User Manual
- June 3, 2024
- OSALIS
Table of Contents
- OSALIS WaxBath Pro Therapy Heated Paraffin Wax Bath
- Welcome
- About your WaxBath
- How to Use your WaxBath
- How to Clean your WaxBath
- Where can I Use Wax Therapy?
- Important Safety Information
- Specifications
- WaxBath Paraffin Wax Melts
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
OSALIS WaxBath Pro Therapy Heated Paraffin Wax Bath
Welcome
Thank you for choosing WaxBath™.
Your WaxBath™ ProTherapy Heated Paraffin Wax Bath provides a variety of health
and wellbeing benefits, including:
- Salon-quality therapy for dry, rough and stressed skin
- Protection for damaged skin, such as eczema
- Promoting the absorption of essential nutrients to maintain youthful skin
- Alleviating aches and pains by stimulating blood flow and improving circulation. Ideal for arthiritis sufferers and stiff muscles.
About your WaxBath
C: Temperature (45°C – 95°C)
H: Time (1 – 99 minutes)
Increase the temperature/treatment time
Decrease the temperature/treatment time
Set the temperature/treatment time
Standby
How to Use your WaxBath
- Remove your WaxBath™ from its packaging, insert the power cable and plug into a plug socket. A ‘beep’ will sound when your WaxBath™ has power.
- Remove the lid and pour in your desired amount of WaxBath™ Paraffin Wax Melts. Replace the lid to contain the heat and help your wax melt faster.
- Push the standby button once to turn on your WaxBath™.
- Your WaxBath™ will start at 50°C (C50). Adjust the temperature and treatment time to melt your desired quantity of wax.
Amount of WaxBath™ Paraffin Wax Melts| Melting Temperature (C)| Time to Melt (H) (approx.)
---|---|---
MINIMUM
1 bag (500g)
| 50°C| 45 minutes
2 bags (1,000g)| 85°C| 60 minutes
3 bags (1,500g)| 85°C| 60 – 80 minutes
MAXIMUM
4 bags (2,000g)
| 85°C| 60 – 80 minutes
5. Once your wax has melted, allow it to cool to a comfortable temperature of 50°C (C50) before use. Use this time to clean and dry your therapy area.
6. Once the LED screen reads C50, test the temperature of the wax cautiously using your elbow, followed by the inside of your wrist. Alter the temperature using + and – as needed.
7. Dip your chosen therapy area into the wax, then fully remove and allow to air dry. Dip again to build a second layer of wax. Repeat until you have 4-5 layers of wax built up.
8. Once the top layer of wax has dried, cover the therapy area with a towel and relax whilst the heat from the wax soothes the area.
9. After 20-30 minutes, gently peel the wax off and massage moisturisers or body oils into the therapy area.
10. Repeat for all therapy areas.
11. To turn off the device, first put it in standby mode by pressing the standby button once. Then unplug from the power source, clean, and store.
How to Clean your WaxBath
- Once the wax has solidified, turn your WaxBath™ back on for a couple of minutes to melt a thin layer of the wax block. This makes it easier to slide the block out of the bath. Make sure you have turned your WaxBath™ off before moving it.
- If required, you can carefully chop your block of paraffin wax for easier storage.
- Once your WaxBath™ has fully cooled, remove any remaining wax using a clean damp cloth.
- Replace the lid and store your WaxBath™ with its power cable ready for your next use.
Top tip: Slide your solid wax out onto a chopping board and cut up for easier storage. Your paraffin wax can be reused and can last for over 2 years if looked after.
Where can I Use Wax Therapy?
Paraffin wax therapy works on two levels; moisturising and softening the skin,
whilst warming deeply to improve blood circulation and reduce joint pain. It
can be especially beneficial for sufferers of arthritis pains and stiff
muscles.
Treat yourself to wax therapy as often as you like!
- Feet
- Hands
- Arms
- Elbows and knees
Important Safety Information
- Do not place the WaxBath™ into any liquid.
- Do not operate the device if it has a damaged cord or plug, is not working properly, or has been dropped or damaged in any manner.
- Always use the WaxBath™ on a level surface where it cannot fall.
- Unplug the device when it’s not in use. Allow to cool before handling and cleaning the unit.
- Always test the temperature of the wax before submerging any body part into the unit.
- Use the WaxBath™ only for its intended use as described in this user manual. The manufacturer is not liable for damage resulting from improper or careless use.
- Do not allow children to play with this device.
- Do not attempt to repair or modify this device as your guarantee will be invalidated.
- If you are pregnant or suffer from health problems, please consult your doctor before using the device. Do not use this device if you have heart disease, flushed skin, inflammations, swelling, sensitive areas, diabetes, open wounds, burns, eczema, psoriasis or reduced sensitivity to pain or heat.
- Do not operate your WaxBath™ without paraffin wax.
- Remove jewellery from your hands and feet before use.
- If pain, irritations, dermatitis or discomfort occurs, stop treatment and consult your doctor.
- Do not use paraffin wax on open cuts.
Specifications
Max capacity: 5000ml
Voltage: USA: 110-120V; EU: 220-240V
Power: 230W
Temperature range: 30°C – 85°C
WaxBath Paraffin Wax Melts
- Safe for even sensitive skin
- Low melting temperature
- Reusable
- Food-grade
Save when you buy more!
Buy now from
www.stressnomore.co.uk
Contact us
Our friendly team of UK based advisors are there to help you
Any questions, just email
sales@stressnomore.co.uk
or call
+44 (0)1482 496931 Mon – Fri 8am – 4pm
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>