MAXXUS MX-600081-00019-0001 Strong Wall Exercise Bar Instruction Manual

June 14, 2024
MAXXUS

MAXXUS MX-600081-00019-0001 Strong Wall Exercise Bar

MAXXUS-MX-600081-00019-0001-Strong-Wall-Exercise-Bar-
PRO

Product Information

Specifications

  • Expansion screw size: M10x90
  • Quantity: 4

Product Usage Instructions

Care, Cleaning, and Maintenance
It is important to regularly clean and maintain the product to ensure its longevity and performance. Use a damp cloth to clean the external surfaces. Avoid using harsh chemicals that may damage the product.

Safety Instructions
Follow all safety instructions provided in the manual before using the product. Ensure proper installation and usage to prevent accidents and injuries.

Assembly

  1. Identify the components: base structure, external handle, medium handle, internal handle, expansion screws.
  2. Place the base structure on a stable surface.
  3. Attach the external handle to the base structure securely.
  4. Securely attach the medium and internal handles as per the assembly diagram provided.
  5. Use the M10x90 expansion screws to fasten the handles to the base structure. Ensure they are tightened properly.

FAQ

  • Q: How often should I clean the product?
    A: It is recommended to clean the product regularly, at least once a week, to maintain its appearance and functionality.

  • Q: What should I do if any parts are missing during assembly?
    A: Contact customer support immediately for assistance in obtaining the missing parts before proceeding with assembly.

Care, cleaning & maintenance

Cleaning
Clean your training device after each training session. Use a damp cloth and soap. Never use solvents. Regular cleaning contributes significantly to the maintenance and longevity of your training device. Damage caused by body sweat or other liquids is not covered by the warranty under any circumstances.

Maintenance – Checking the fastening material
Check the tightness of the screws and nuts at least once a month. Tighten them again if necessary.

Disposal

This device is recyclable. At the end of its useful life, please dispose of it properly. Never dispose of your training device in normal household waste. Dispose of the device exclusively via a municipal or approved disposal company. Observe the currently applicable regulations. In case of doubt, ask your city or municipal administration for a proper and environmentally friendly disposal option.

Safety Instructions

Before you start the installation and the first training, please make sure that you are familiar with the entire user manual, especially the safety information, the maintenance & cleaning information and the training information. Also ensure that everyone who uses this training device is also familiar with and follows this information. Keep this manual in a safe place for information, maintenance and cleaning work or for ordering spare parts.
Be sure to strictly follow the maintenance and safety instructions in this manual.
This training device may only be used for its intended purpose, i.e. for the physical training of adults.
Any use other than for its intended purpose is not permitted and may result in a risk of accidents, damage to health or damage to the training device. The distributor cannot be held responsible for damage caused by improper and inappropriate handling.

Training environment

  • – Choose an installation location that gives you optimal freedom and comfort on all sides of the training device. offers the greatest possible safety during the training
  • When choosing the mounting location, make sure that the load capacity and condition of the wall is sufficient.
  • Ensure good ventilation and optimal oxygen supply during the training. Draft is not allowed avoid.
  • The installation location is an area in heavily frequented rooms or near main directions of travel (emergency exits, doors, passageways, etc.) are not permitted.
  • Your training equipment is not suitable for outdoor use, therefore storage and training with your Device only possible within temperature-controlled, dry and clean rooms.
  • The operation and storage of your training device in wet areas, such as swimming pools, saunas, etc. is not possible.
  • Ensure that your training device does not come into contact with hot objects and that there is sufficient a safe distance is maintained to all heat sources, such as heating, stoves, open fireplaces, etc.

Personal safety instructions for the training

  • You should have a health check with your doctor before you start training.
  • If you feel physically unwell or have breathing problems, stop training immediately.
  • Always start your training sessions with a low load and increase this in the course of your
  • Training evenly and gently. Reduce the load again towards the end of your training session.
  • Make sure that you wear suitable sports clothing and sports shoes during training.
  • Please note that large pieces of clothing can get caught in components during training.
  • Your training device can only be used by one person at a time.
  • Before each training session, check that your device is in perfect condition.
  • Never use your training device if it has faults or defects.
  • Independent repair work can only be carried out after consultation and approval by our service department and can be executed.
  • Only original spare parts may be used.
  • Improper repairs and structural changes (fitting of non-permitted parts, dismantling of original components, etc.) are not permitted.
  • This can hurt the technical safety of the device and dangers arise for the user.
  • Your training device must be cleaned after each use.
  • In particular, remove all Contamination caused by body sweat or other liquids.
  • Your training device is not suitable for use by children.
  • During training, third parties – in particular children and animals – must keep a sufficient safety distance from the exerciser.
  • Before each training session, check if there are any objects under your training device or the training area and remove them you this in any case. Never train with your training device if there are objects underneath.
  • Always make sure that your training device is not used by children as a toy or climbing device will.
  • Instruct persons, especially children, who are present during the training, about possible dangers during of the training.
  • This is especially true for the range of motion of the user.
  • Check at regular intervals (at least once a month) all components and the secure seating of screws and nuts.

The construction of this training device is based on the latest technical and safety standards. This training device should only be used by adults! Extreme, incorrect and/or unplanned training can cause damage to health! Any manipulation or intervention in the device not described or explained here can damage the training device or pose a danger to persons. If you have any questions or in case of doubt, please contact your specialist dealer or the MAXXUS service team. They will be happy to help you.

Equipment Overview & Warning Notice

MAXXUS-MX-600081-00019-0001-Strong-Wall-Exercise-Bar-1

Warning notice:
Use the training device exclusively for its intended purpose. Improper use may endanger the user. Read the installation & operating instructions in detail and observe all instructions and information. Keep children and pets away from this training device.

Assembly

  • Carefully unpack all parts of the scope of delivery.
  • Carry out the installation carefully, as damage or defects resulting from installation errors are not covered by the warranty or guarantee under any circumstances.
  • Therefore, read the instructions carefully before installation, follow the sequence of installation steps exactly and follow the instructions for the individual installation steps.
  • The installation of the training device must be carried out conscientiously by adult persons.
  • Mount your training device in a place that is level, clean and free of objects that could hinder mounting.
  • Please note that there is always a potential risk of injury during assembly work and whenever tools are used.
  • Therefore, always be careful when mounting this training device.
  • During the individual assembly steps, make sure that all parts are only screwed together by hand and that the screws are only tightened when all components fit exactly.
  • Training can only begin once the assembly of your training device is complete.
Part Name size QTY
1 Base frame   2
2 Chin-Up-Bar, right   1
3 Chin-Up-Bar, left   1
4 Screw M10x75 4
5 Washer ¢10 8
6 Lock nut M10 4
7 Lock Nut M8 2
8 Washer <1)8 4
9 Screw M8x35 2
10 Expansion screw M10x90 4

Assembly step:
Connect the right and left pull-up bar (2-right/3-left.) Use two M8x35 pan head screws (9), four 08 washers (8) Insert one of the two base frames (1) each into the receptacles of the pull-up bar and fix the base frames to the pull-up bar with two hexagon head screws M10x75 (4), four washers 010 (5) and two lock nuts M10 (7) each.

MAXXUS-MX-600081-00019-0001-Strong-Wall-Exercise-Bar-2

The heavy-duty dowels included in the scope of delivery are only suitable for concrete walls. In case of doubt, please obtain technical advice or ask your specialist dealer to advise you whether the dowels included in the scope of delivery are suitable for your walls.
ATTENTION: Only use screws or dowels that are suitable for your type of wall or stone.

Scope of delivery:

  • 4 pieces heavy-duty dowels M12/95
  • Required drill size: 016
  • Minimum drilling depth: 130 mm
  • Maximum drilling depth: 150 mm

Assembly instructions:

  • Step 1: Mark the drill holes very accurately. As soon as the heavy-duty dowel is firmly in place, you will have no more room for manoeuvre.

  • Step 2: Ideally drill the holes with a percussion drill according to the specifications regarding diameter and drilling depth.

  • Step 3: As the heavy-duty plug can easily get caught in stone or other dirt, it is essential to clean the drill hole after drilling.

  • Step 4: For this step you need the help of a second person.

    • Person A holds the pull-up bar against the wall so that the drill holes of the pull-up bar match the drill holes in the wall.
    • Person B inserts the heavy-duty dowels into the drill holes and hammers them into the required setting depth.
      Caution: When hammering in the heavy-duty dowels, make absolutely sure that you do not damage the threads.
  • Step 5: Tighten the nuts of the heavy-duty plugs.

Note on location selection:
When choosing a location, make sure that the wall is freely accessible and that there is a safety clearance of at least 50 cm to the right and left of the pull-up bar and at least 100 cm behind the pull-up bar.
The height should be chosen in a way that there is a distance of at least 10 cm between head and ceiling at the top of the chin-up, where the chin is above the chin-up bar.

Warranty

In order to enable the MAXXUS® support team to help you quickly in case of service, we need some data from your fitness equipment or from you. To be able to assign the exact spare parts to your fitness equipment, we need the product name, date of purchase and serial number.
If necessary, please fill out the repair order/damage report form of this user manual completely and send it to us by mail or fax.

Fields of application & warranty periods
MAXXUS® fitness equipment is suitable for different applications depending on the model. The application area of this equipment is exclusively the home area.

home area:

  • Exclusive private use
  • Warranty period: 2 years

Semi-professional area:

  • Use under supervision in hotels, physiotherapy practices, etc.
  • The use in a fitness studio or similar facility is excluded!
  • Warranty period: 1 year

Professional area:
Use in a gym or similar facility under the supervision of qualified personnel.

Warranty period: 1 year
If your training device is used in an area not intended for the training device, a warranty or guarantee claim may expire!

Proof of purchase and serial number
In order to maintain your entitlement to services within the warranty, we require proof of purchase from you in all cases. Therefore, please always keep your proof of purchase or invoice and send us a copy in case of warranty as an attachment to your repair order/damage report without being asked. This will ensure that your service case is processed quickly. To enable us to clearly identify your model version, we require the product name, serial number and date of purchase for service purposes.

Warranty conditions
The warranty period for your training device starts from the date of purchase and applies exclusively to products purchased directly from MAXXUS Group GmbH & Co. KG or a direct and authorised distribution partner of MAXXUS Group GmbH & Co. KG or a direct and authorised sales partner of MAXXUS Group GmbH & Co.
The warranty covers defects resulting from manufacturing or material defects. It only applies to devices purchased in Germany. It does not apply to damage and defects caused by culpably improper use, negligent or wilful destruction, lack of or omitted maintenance and/or cleaning measures, force majeure, operational and thus normal wear and tear, damage caused by the penetration of liquids, repair or modification of spare parts of foreign origin. The warranty also does not apply to faulty installation or damage caused by incorrect installation. Certain components are subject to wear and tear due to use or normal wear and tear. These components include, for example:

  • Ball bearing
  • Bearing bushes
  • Bearing
  • Drive belt
  • Switches and buttons
  • Running belts
  • Running plates
  • Running rollers

Signs of wear and tear on these wearing parts are not covered by the warranty. Should the training device be collected from you due to a repair, the disassembly and provision, as well as the receipt and reassembly of the device is necessary. In principle, these services are not covered by the warranty. In the case of individual parts, the defective parts must be sent to our service address well packed and sent by prior arrangement.

Services outside the warranty & spare parts ordering
The MAXXUS® service team is of course also available for problem-solving if cases of a defect occur after the end of the warranty period, or cases that are not covered by the warranty. In such cases, please contact us directly by e-mail: service@maxxus.de
Please send orders for spare and/or wear parts, stating the product name, spare part designations, spare part numbers and the required order quantities to service@maxxus.de
Please note that additionally required fastening material such as screws, washers, etc. must be ordered separately. are not included in the scope of delivery of the individual spare parts and must be ordered separately.

© 2020 by Maxxus Group GmbH & Co. KG
All rights reserved

This publication may not be reproduced, stored in retrieval system, or transmitted on whole or in part, in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of MAXXUS Group GmbH & Co. KG.
Technical and or color modifications and errors excepted.

Maxxus Group GmbH & Co. KG Nordring 80
D-64521 GroB-Gerau Germany
E-Mail: info@maxxus.de
www.maxxus.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals