KOLINK Unity Meshbay ARGB MIDI Tower Case User Manual
- June 16, 2024
- KOLINK
Table of Contents
UNITY
MESHBAY
ARGB MIDI TOWER CASE
USER MANUAL
ACCESSORY PACK CONTENTS
PANEL REMOVAL
PANEL REMOVAL
- Left Panel – Unscrew the two thumbscrews and slide the glass panel backwards.
- Right Panel – Unscrew the two thumbscrews and slide off.
- Front Panel – Find the bottom cut out, stabilise the chassis with one hand, and pull from the cutout with a little force until the clips release.
MOTHERBOARD INSTALLATION
MOTHERBOARD INSTALLATION
-
Align your motherboard with the chassis to locate where the stand-offs should be installed.
Once done, remove the motherboard and fasten stand-offs accordingly. -
Insert your motherboard I/O plate into the cutout at the rear of the case.
-
Place your motherboard into the chassis, making sure the rear ports fit into the I/O plate.
-
Use the provided motherboard screws to attach your motherboard to the chassis.
POWER SUPPLY INSTALLATION
POWER SUPPLY INSTALLATION
- Place PSU in the bottom rear of the case, within the PSU shroud.
- Align the holes and secure with screws.
GRAPHICS CARD/PCI-E CARD INSTALLATION
VIDEO CARD/PCI-E CARD INSTALLATION
- Remove the rear PCI-E slot covers as necessary (depending on the slot size of your card)
- Carefully position and slide your PCI-E card into place, then secure with the add-on card screws supplied.
- If mounting vertically, remove the verbcal PCI-E slot covers and attach a riser cable to the card (sold separately) before securing with the add-on card screws.
3.5″ HDD INSTALLATION
3.5″ HDD INSTALLATION
- Plce the 35″ HDD nto/0n top o the HDD bracket and screw in if require.
2.5″ SSD INSTALLATION (REAR)
2.5″ SSD INSTALLATION
- Remove the bracketfrom the rea o the motherboard plate attach your 257 hive nd then srew backinto place.
- Placethe 25 HOD/SSD nto/o t9p f the HOD bracket and screw inf requirc,
TOP FAN INSTALLATION
TOP FAN INSTALLATION
- Remove the dust fiter from the top of the case.
- Algn your fan(s] o the srew holeson the tp o the chassis and secure with screws.
- Reptace yourdust fite once secured
FRONT/SIDE/REAR FAN INSTALLATION
FRONT/SIDE/REAR FAN INSTALLATION
- Align your an o the screw holes on the chasss and secure with screws.
WATERCOOLING RADIATOR INSTALLATION
WATERCOOLING RADIATOR INSTALLATION
- Secure the fans ta the radiator, hen asten the aditor inside the chassis by Securing with screws fom the outside.
I/0 PANEL INSTALLATION
I/0 PANEL INSTALLATION
- Carefully check the labelling of each connector from the I/O panel to identify their function.
- Cross reference with the motherboard manual to locate where each wire should be installed, then secure one at a time. Please ensure they are installed in the correct polarity to avoid non-function or damage.
Pro Gamersware GmbH
GauBstraBe 1, 10589 Berlin, Deutschland
[email protected]
+49(0)30 83797272
www.kolink.eu |
[email protected]
The WEEE symbol indicates that this product must not be disposed of with normal household waste. Through the correct disposal ofthis product, you wil help protect the environment. For more information on the disposal of this product, please contact your local municipality, your waste disposal service or the shop where you purchased the product