Dongguan Langming Intelligent Technology KT612 PC Guitar Instructions

Dongguan Langming Intelligent Technology KT612 PC Guitar

Introduction

This guitar is a wireless 2-ln-1 guitar using 2.4G RF technology. Use the receiver to connect to the USB interface of the PS3 host or computer to achieve a wireless connection with the guitar. Turn on the power, plug, and play, no need for any code matching. Work with the Guitar Hero 3 /Rockband games on the PS3 platform. And work with the Guitar Hero 3/Guitar Hero 3 Legends of Rock/Guitar Hero World Tour/Guitar Hero Aerosmith/Game ,PS3 Guitar Hero 3/Guitar Hero 4/Guitar Hero 5/Rockband1/Rockband2 on the PC platform.

Function keys

1. Five-color buttons: green, red, yellow, blue and orange.
2. Game switching button: Press and hold this button for 2 seconds on PS3 platform to switch between Guitar Hero and Rockband game modes; on PC platform, this button is a Backpace function.
3. Sound effect switch: Toggle this button in the Rockband game on the PS3 platform, and five different sound effects will appear for selection.
4. Strum bar: When there is a long sound in the game, you can tap the strum bar to change the sound effect in the game.
5. + key: PS3 platform pause and start key; PC platform confirm key.
6. – key: PS3 platform selection key; PC platform Esc function.
7. Strap buckle
8. Strum key: In the game, when the melody of different colors is corresponding to the pluck key and the play button are operated at the same time to produce different melody.
9. PS button: PS3 platform presses the PS button menu, selects the channel or exits the game, wakes up the sleeping guitar and other functions; PC platform wakes up the guitar and Menu function.
10. Channel LED indicator.
11. Direction control keys
12. Strap buckle
13. Battery cover
14. Guitar decorative surface lock.
15. AA battery compartment.
16. Power toggle switch.
17. Guitar pole lock.
18. Suspender buckle.
19. Receiver: PC platform red and blue lights are on at the same time; PS3 platform Guitar Hero mode lights blue, Rockband game mode lights red.

Guitar pole installation and removal

1. Please take out the absorbent sponge from the main body of the guitar first (shown in the box below).The absorbent sponge is to protect the probes inside the guitar from being easily oxidized. When the guitar is not used for a long time, please put the absorbent sponge back to its original position.
2. Take out the guitar stick in the packing box, insert the guitar stick into the main body as shown in the picture, and hear the sound of “ka” indicating that it has been inserted in place and has been automatically locked.
3. If you need to remove the guitar stick, please turn the lock to the unlocked position first, and then carefully pull out the guitar stick

Install the strap

1. First take out the strap in the box
2. Use the holes at both ends of the strap to connect to the strap buckle on the guitar.
3. The length of the strap can be adjusted as needed.

Install the battery

The product supports standard LR6 (AA) batteries. The package does not contain battery. Consumers need to purchase according to this specification.

1. Check that the switch is turned off (OFF state) before installing the battery.
2. Please install the battery correctly in accordance with the polarity indication.
3. After the battery is installed, please check whether the battery is installed correctly.
4. Turn on the switch to ON, and close the battery cover.

Connect PS3 game console

First, turn on the power switch in the battery cover of the guitar and turn it to ON, then plug the receiver into the USB port of the PS3 game console.The guitar will automatically pairand connect with the receiver. After the connection is success­ful, the blue light of the receiver will always be on to indicate that the connection is successful; The guitar is in Guitar Hero mode at this time.
(If you enter the sleep state, press the PS button of the guitar to wake up the guitar and automatically connect)

Switch between Hero and Rockband games
Firstly, the blue light of the receiver will be on after the guitar is successfully connected to the receiver, and the default Guitar Hero game mode. If you are playing a Rockband game, you need to press and hold the small button on the guitar side for 2 seconds, and wait for the LED on the receiver side to turn on red. Switch to Rockband game mode successfully. Firstly, the blue light of the receiver will be on after the guitar is successfully connected to the receiver, and the default Guitar Hero game mode. If you are playing a Rockband game, you need to press and hold the small button on the guitar side for 2 seconds, and wait for the LED on the receiver side to turn on red. Switch to Rockband game mode successfully.

Connect to a Windows computer
First, turn on the power switch in the battery cover of the guitar and turn it to ON, then insert the receiver into the USB port of the host computer. The guitar will automatically pair with the receiver. After the connection is successful, the red and blue lights of the receiver will always be on to indicate the connection is successful. (If you enter the sleep state, press the PS button of the guitar to wake up the guitar and automatically connect)

Note that after entering the game on the PC side, some games default to left- handed playing, which can be set in the guitar game.
For example, set Guitar Hero Aero smith for left-handed or right-handed use
After entering the game, press the green button of the guitar to confirm, and the-key to return; press the arrow keys to select OPTIONS below, and press the green button to confirm.

Select the following CONTROLLER and press the green button to confirm.

Cancel the ✓ in the position of P1 in the figure below, it is the right-handed guitar. If you add ✓ to the left-handed mode, (the ✓ in the right-handed modes P1 and P2 of the two-player game are both cancelled as the right-handed guitar mode)

The use of plucking keys and five-color keys:
The 5 keys from left to right in the game correspond to the 5 keys of “green”, “red”, “yellow”, “blue”, and “orange” on the guitar. When the notes on the game reel follow the music to move to the corresponding position at the bottom of the reel, press the button of the corresponding color on the guitar with your left hand, and flick the guitar plucking key with your right hand, you can play the correct music. If the buttons or beats are incorrect, false noises will be produced.

The use of the pressure bar under the tone
For the long note in the game, when the note starts, you can just flick the plucking key once with your right hand, but the left hand will not release until the end of the long note when you press the key at the correspond­ing position. It will be generated by pressing the pressure lever before the end of the long note Different sound effects.

Guitar Beads
The guitar contains a bead-blasting function. When the game’s energy is more than 50%, the guitar is quickly erected, the game reel will change color, and the music will also change the sound effect.

Sleep and wake
When the guitar is connected to the receiver, when there is no button action on the guitar side for 3 minutes, the guitar enters sleep mode; during use, long press the “+” button for 5 seconds, the guitar enters sleep mode. When the guitar is sleeping, you can press the “+” button on the guitar or press the “PS” button to wake the guitar and connect automatically.

Battery level voltage indicator
When the battery voltage is lower status, the guitar LED will flash and there will be a broken link, reminding to replace the battery; when it is lower than the lowest preset value, it will automatically shut down

Precautions

1. After the PC platform game, the guitar must be squared on the desk­ top; note that the PC platform cannot be placed upright. There is a bead switch inside the guitar. When the guitar is placed upright, the bead switch will be turned on, and the computer may be abnormal.Try to turn off the power switch on the guitar end as soon as possible after the game is over.

2. The guitar has no function and the indicator light does not light up?
   Please check whether the positive and negative poles of the battery in the guitar are installed incorrectly.

3. The Rockband game mode cannot be used normally?
   Please check whether the guitar is switched to Rockband game mode. If it is successfully switched to Rockband game mode, the receiver will be on with a red light.

4. The pressure rod is not functioning or the pressure rod is not normal?
   Do not touch the pressure lever before turning on the power switch of the guitar. Please turn off the power switch and turn on the power again.

5. The guitar stick buttons have no function?
   Please check whether the metal probe point of the guitar shaft is oxidized; whether the probe at the position where the main body is con­nected to the guitar shaft is bent or blocked by other things; if the metal probe point of the guitar shaft is white or black, it means that there is oxide coating, please use alcohol cloth or rubber Wipe the metal probe point gently. (If the guitar is not used for a long time, please pack it in a plastic bag to avoid oxidation of the metal probe) 

6. When the product is not in use, do not put the product in a humid or dusty place, and do not expose the product to the sun.

FCC Warnning

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection againstharmful interference in a residential installation. This equipment generates, uses and can radiateradio frequency energy and, if not installed and used in accordance with the instructions, maycause harmful interference to radio communications. However, there is no guarantee thatinterference will not occur in a particular installation. If this equipment does cause harmfulinterference to radio or television reception, which can be determined by turning the equipmentoff and on, the user is encouraged to try to correct the interference by one or more of thefollowing measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 0cm between the radiator and your body.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>