baseus PB4475Z Magnetic Mini Wireless Fast Charging Power Bank User Manual

Table of Contents

Baseus Magnetic Mini Wireless Fast Charge Power Bank iP Edition 10000mAh 20W

warnings

This is NOT a toy! Please place this product in areas that are not easily accessible by children. Do not allow children to operate this product, or accidents may occur.
Please charge this product with a charger approved by the local safety standards in case of danger or damage.
DO NOT apply pressure, and avoid collisions. The battery and circuit may be damaged if this product falls from a great height, experiences intense shocks, or is immersed in liquid; if so, please avoid using this product.
If this product suffers from deformation, leakage, or radical decline in performance, please stop using this product.
Please DO NOT charge any device or recharge this product in places that may affect its heat dissipation, such as pants pockets, enclosed bags, beds, or couches. Ensure this product is not under any cover when operating.
When charging other devices for prolonged periods, DO NOT stack any device on top of this product, or it might affect its heat dissipation.
This product CAN NOT be disassembled, applied pressure, pierced, short-circuited, immersed in liquid, disposed of in a fire, or exposed to a high temperature or heat source with a temperature greater than 140°F (60°C).
DO NOT place this product in areas with extremely high temperatures. Such as under direct sunlight or in a vehicle with a very high interior temperature.
This product contains lithium batteries, DO NOT disassemble it! Or danger or battery damage may occur.

Attention

Please fully charge this device before using it for the first time.
The power banks have conversion efficiency, so the battery capacity of the power bank is not equal to the rechargeable capacity.
Please choose an appropriate charger for recharging this product and suitable cables when charging other devices.
Please ensure some supervision is in progress when recharging this product, DO NOT charge this product without any care.
Please remove the cable when recharging this product or finished charging for any other device to preserve the product’s integrity.
If the indication does not light up after pressing the power button, please recharge this product.
Please preserve this product with a battery percentage between 25%-50% for long-term storage. Place this product in a cool and dry environment. To slow down battery aging, avoid storing this product in an empty or full charge for long-term storage.
Consumers shall be liable for any personal and property damage resulting from their improper use of the user manual or ignoring the warning, to which our company will not bear any legal liability.

Caution

This product does not contain any user-serviceable parts, and the rechargeable battery is not replaceable.
Putting the battery pack into fire or heating it in an oven, as well as subjecting the battery pack to mechanical squeezing or cutting, may result in an explosion.
Placing the battery pack in an extremely high-temperature environment may cause an explosion or leakage of flammable liquids or gases.
Subjecting the battery pack to extremely low air pressure may cause an explosion or leakage of flammable liquids or gases.

This product utilizes magnetic and capacitive coupling mechanisms to achieve non-beamforming near-field power transmission from the power source to the load.
The device complies with relevant regulations such as the “Interim Provisions on Radio Management for Wireless Charging (Power Transmission) Devices,” as well as laws and regulations concerning product quality, electromagnetic radiation, electrical safety, and national standards.
It is not allowed to change the usage scenarios or conditions, expand the operating frequency range, or increase the transmission power (including adding additional power amplifiers) without permission.
It is not allowed to cause harmful interference to other legal wireless services and stations. Users cannot request protection against radio interference or radiation interference. If harmful interference to other legal wireless services and stations occurs, immediate use must be stopped, and it can only be resumed after taking measures to eliminate the harmful interference.
Wireless charging devices are prohibited in this area. The use of a wireless charging function is not allowed.
If the use of wireless charging devices is causing interference to broadcast services, it should be immediately discontinued.
The use of wireless charging devices in ships, aircraft, and railway locomotives (including high-speed train units) should comply with this regulation and the relevant regulations of the industry authority.

baseus-PB4475Z-Magnetic-Mini-Wireless-Fast-Charging-Power-Bank-
FIG-4

This product is a mini-sized portable power bank with a built-in 20W fast charging cable.
The Type-C port is multi-protocol certified and supports two-way fast charging.
It has multiple built-in safety protection circuits for overcurrent, overvoltage, short circuit, etc.

Operating Environment

The 5-year icon refers to the “valid period for environment-friendly use”, not the product quality assurance period.
All electronic products contain toxic and harmful substances such as lead, mercury, and cadmium.
The overdue use of these products may lead to leakage or mutation of these toxic and harmful substances, causing environmental pollution or serious damage to people and property.
The term “environment-friendly use period” means that all electronic products shall be used within this validity period. We won’t be held liable for safety issues caused by using the product beyond its safe service life.

Statement on Toxic and Hazardous Substances in Electronic Information Products

baseus-PB4475Z-Magnetic-Mini-Wireless-Fast-Charging-Power-Bank-
FIG-5

This form is compiled under SJ/T 11364.

0: Indicates that contents of the toxic and hazardous substances in all homogeneous materials are below the limit requirements specified by GB/T 26572 standard.
X: Indicates that contents of the toxic and hazardous substances exceed the limit requirements specified by GB/T 26572 standard in at least one homogeneous material of the component.