PIT PH20-2.0 Battery Pack User Manual

PIT PH20-2.0 Battery Pack

Battery Pack

Safety instructions

Read all the safety information and gen-eral instructions. Failure to observe the safety information and general instructions
Keep all the safety information and general instruc-tions for future reference.
These safety warnings apply only for P.I.T.

• These safety warnings apply only for P.I.T. lithium-ion batteries!
• Only use the battery with products from the manufacturer. This is the only way in which you can protect the battery against dangerous overload.
• The battery is supplied partially charged. To ensure full battery capacity, fully charge the battery in the charger before using your power tool for first time.
• Keep battery packs out of the reach of children.
• Do not open the battery. There is a risk of short-circuiting.
• In case of damage and improper use of the battery, vapours may be emitted. The battery can set alight or explode. Ensure the area is well ventilated and seek medical attention should you experience any adverse effects. The vapours may irritate the respiratory system If used incorrectly or if the battery is damaged, flammable liquid may be ejected from the battery. Contact with this liquid should be avoided. If contact accidentally occurs, rinse off with water. If the liquid comes into contact with your eyes, seek additional medical attention. Liquid ejected from the battery may cause irritation or burns.
• Never service damaged battery packs. Service of battery packs should only be performed by the manufacturer or authorized service
• The battery can be damaged by pointed objects such as nails or screwdrivers or by force applied externally. An internal short circuit may occur, causing the battery to burn,smoke
• Do not short-circuit the battery pack. When the battery pack is not in use, keep it away from other metal objects, like paper clips,- coins, keys, nails, screws or other small metal objects, that can make a connection from one terminal to Shorting the battery terminals together may cause burns or a fire.
• If the battery is damaged liquid can be ejected and cover nearby surfaces. Check affected parts. Clean these parts or change them if necessary.
• Protect the battery against heat, e.g.against continuous intense sunlight,fire, dirt, water and moisture. There is a risk of explosion and short-circuiting.
• Only operate and store the battery at an ambient temperature between -20 °C and +50 °C. Do not leave the battery in your car in the summer, for example. At temperatures of < 0 °C some devices may experience a loss of power.
• Only charge the battery at an ambient temperature which is between 0°C and +45°C. Charging outside of this temperature range can increase the risk of damage to the battery and pose a fire hazard.

Technical Data

Model

1)20-2.0

| Voltage(V)| Capacity(Ah)
---|---|---
1)20-3.0| DC 20| 2.0
1)20-4.0| DC 20| 3.0
1)20-5.0| DC 20| 4.0
1)20-6.0| DC 20| 5.0
 | DC 20| 6.0

Note Since the product is constantly being improved,

P.I.T. reserves the right to make changes to the specifications and product specifications specified here without prior notice.

Maintenance and Service

Maintenance and Cleaning
Occasionally clean the ventilation slots and the terminals on the battery using a soft brush that is clean and dry.

Transport
Lithium-ion batteries are subject to the Dangerous Goods Legislation requirements. The batteries are suitable for road transport by the user without further restrictions.

When shipping by third parties (e.g.: by air transport or forwarding agency), special requirements on packaging and labelling must be observed. For preparation of the item being shipped, consulting an expert for hazardous material is required.
Dispatch battery packs only when the housing is undamaged. Tape or mask off open contacts and pack up the battery in such a manner that it cannot move around in the packaging. Please also observe the possibility of more detailed national regulations.

Disposal
Do not dispose of batteries with household waste!
Batteries and packaging should be sorted for environmentally friendly recycling.

Product serial number interpretation
serial number

The first and second digits of the product serial number from left to right Year of production, the third and fourth digits indicate the month of production, the The fifth and sixth digits indicate the production day

TERMS OF WARRANTY SERVICE

1. This Warranty Certificate is the only document that confirms your right to free warranty service. Without presenting this certificate, no claims are accepted. In case of loss or damage, the warranty certificate is not restored.

2. The warranty period for the electric machine is 12 months from the date of sale, during the warranty period the service department eliminates manufac-turing defects and replaces parts that have failed due to the fault of the manufacturer free of charge. In the warranty repair, an equivalent operable product is not provided. Replaceable parts become property of service providers.
   P.I.T is not liable for any damage that may be caused by operation of the electric machine.

3. Only clean tool accompanied with the following duly executed documents: this Warranty Certificate, Warranty Card, with all fields filled out, bearing the stamp of the trade organization and the signature of the buyer, shall be accepted for warranty repair.

4. Warranty repair is not performed in the following cases:

   • in the absence of a Warranty Certificate and a Warranty Card or their incorrect execution;
   • with failure of both a rotor and a stator of the electric engine, charring or melting of primary winding of the welding machine transformer, charging or starting-charging device, with internal parts melting, burn down of electronic circuit boards;
   • upon expiration of the warranty period;
   • at attempts of opening or repair of the electric machine outside the warranty workshop; making constructive changes and lubrication of the tool during the warranty period, as evidenced, for example, by the creases on the spline parts of the fasteners of non-rotational parts.
   • when using electric tools for production or other purposes connected with making a profit, as well as  in case of malfunctions related to instability of the power network parameters exceeding the norms established by GOST;
   • in the events of improper operation (use the electric machine for other than intended purposes, attachments to the electric machine of attachments, accessories, etc. not provided by the manufacturer);
   • with mechanical damage to the case, power cord and in case of damages caused by aggressive agents and high and low temperatures, ingress of foreign objects in the ventilation grids of the electric machine, as well as in case of damage resulting from improper storage (corrosion of metal parts);
   • natural wear and tear on the parts of the electric machine, as a result of the long-term operation (determined on the basis of the signs of full or partial depletion of the specified mean life, great contamination, presence of rust outside and inside the electric machine, waste lubricant in the gearbox);
   • mechanical damages to the tool;
   • (see chapter “Safety Precautions” of the Manual).
   • damage to the product due to non-observance of the rules of storage and transportation.
   • Preventive maintenance of electric machines (cleaning, washing, lubrication, replacement of anthers, piston and sealing rings) during the warranty period is a paid service.
   • The service life of the product is determined by the manufacturer and is 2 years from the date of manufacture.
   • The owner is notified of any possible violations of the above terms of warranty service upon completion of diagnostics in the service center.
   • The owner of the tool entrusts the diagnostic procedure to be conducted in the service center in his absence.
   • Do not operate the electric machine when there are signs of excessive heat, sparking, or noise in the gearbox. To determine the cause of the malfunction, the buyer should contact the warranty service center.
   • Malfunctions caused by late replacement of carbon brushes of the engine are eliminated at the expense of the buyer.

5. The warranty does not cover:

   • replacement accessories (accessories and components), for example: batteries, discs, blades, drill bits, borers, chucks, chains, sprockets, collet clamps, guide rails, tension and fastening elements, trimming device heads, base of grinding and belt sander machines, hexagonal heads, etc.,
   • fast wearing parts, for example: carbon brushes, drive belts, seals, protective covers, guiding rollers, guides, rubber seals, bearings, toothed belts and wheels, shanks, brake belts, starter ratchets and ropes, piston rings, etc. Their replacement during the warranty period is a paid service;
   • power cords, in case of damage to the insulation, power cords are subject to mandatory replacement without the consent of the owner (paid service);
   • tool case.

P.I.T. WARRANTY CERTIFICATE

Product Name_____
Battery Serial Number
Sale Date __
Trade Organization Name __

Dear customer!
Thank you for purchasing the P.I.T tool, and we hope that you will be satisfied with your choice. In the process of manufacturing the P.I.T tools pass multilevel quality control, if nevertheless, your product will need maintenance, please contact the authorized P.I.T service centers.

Attention!
When buying, ask a seller to check the completeness and operability of the tool, to fill out the Warranty Certificate, the Warranty Card (the boxes shall be filled out by a seller) and to affix the seal of the trade organization in the Guarantee Certificate and the Warranty Card.

Warranty
By this Warranty Certificate, P.I.T. company guarantees the absence of defects of the production nature.
In the event any of the above defects are detected during the war- ranty period, the specialized P.I.T. service centers shall repair the product and replace the defective spare parts free of charge.
The warranty period for P.I.T. electric machines is 12 months from the date of sale.

“The warranty maintenance terms acknowledged and accepted. The operability and completeness of the product are checked in my pres- ence. No claims on quality and appearance.”
Buyer’s Signature
Surname (legibly)
Phone ____

Documents / Resources

| PIT PH20-2.0 Battery Pack [pdf] User Manual
PH20-2.0 Battery Pack, PH20-2.0, Battery Pack, Pack
---|---

References

• PIT GOLBAL

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>