PIT BOSS 40854 Wireless Digital Meat Thermometer User Guide
- June 4, 2024
- PIT BOSS
Table of Contents
PIT BOSS 40854 Wireless Digital Meat Thermometer User Guide
COPYRIGHT NOTICE
Copyright 2022. All right reserved. No part of this manual may be copied,
transmitted, transcribed, stored in a retrieval system, in any form or by any
means without expressed written permission of,
Dansons
3411 North 5th Avenue, Suite 500, Phoenix, AZ 85013 sales@pitboss-
grills.com | service@pitboss-
grills.com www.pitboss-
grills.com
Customer Care
www.pitboss-grills.com
PARTS & FEATURES
FEATURES
- Dual probe technology, monitor two different meats.
- Programmed with preset USDA approved temperatures for different types of proteins: ground beef, ground poultry, beef, veal, chicken, pork, poultry, lamb and fish.
- Programmed with preset USDA approved doneness levels for a different types of meat: Rare, Medium Rare, Medium, Medium Well and Well Done.
- User-defined highest temperature to alert when in PROG (Program).
- Display the preset type of meat and doneness levels of dual probe.
- Measurement range: -50°C-300°C (-58°F-572°F).
- Measurement accuracy: ±1°C(±2°F) at -20°C-150°C (-4°- 02°F)
- Fahrenheit and Celsius temperature settings.
- Receiver features a large backlit LCD that makes Nighttime grilling easy.
- Low battery indicator for both transmitter and receiver.
- Max wireless transmission distance is 100m (328 ft).
- Auto Shut-off for both transmitter and receiver after 10 minutes of inactivity if the measured temperature is stable within 2°C (4°F) below 50°C (122°F).
- Timer and temperature settings are saved when unit is powered off.
- Probe and wire can withstand temperature up to 380°C (716°F).
RECEIVER UNIT FEATURES
TRANSMITTER UNIT FEATURES
OPERATING INSTRUCTIONS
BUTTON FUNCTION
INSTALLING & REPLACING BATTERIES
When the LCD of the transmitter or receiver shows a low battery icon, please replace the batteries according to the following steps. Transmitter:
- Open the battery compartment cover located at the bottom of the transmitter by pushing the plastic clasp.
- Install 2 AAA Batteries according to the polarity sign shown in the battery compartment.
- Close the battery compartment cover back into place
Receiver:
- Slide the rear clip following the direction of arrow at first, this will expose a screw on the battery cover. Using a screwdriver, unscrew the battery door compartment cover. For waterproof, we use a screw to lock the battery cover.
- Install 2 AAA Batteries according to the polarity sign shown in the battery compartment.
- Screw the battery compartment cover back and slide the clip into place.
USING THE TRANSMITTER
USING THE RECEIVER
MEAT/PROGRAM SETTING MODE
USING THE TIMER
COOKING TEMPERATURE GUIDELINES
Ensure the wire is connected to the transmitter and then insert the stainless steel probe into the food to be cooked.
Once the probe is inserted, the internal meat temperature will be displayed on the left of the LCD and will increase gradually during cooking. The alarm will automatically beep when the probe temperature reaches the preset temperature (ALERT TEMP), indicating the meat is cooked to the desired doneness. The beep will stop after 1 minute or somebody press the button, but the alarm icon will keep flashing until the temperature falls below the preset temperature.
CARE & MAINTENANCE
Follow these cleaning and maintenance tips to keep your Wireless Digital Meat Thermometer working properly for years to come.
- Do not completely immerse the digital thermometer or receiver in water.
- Do not expose the unit to direct heat or heat surface. Do not use stainless steel probes in microwave ovens.
- Do not use the stainless probe sensor above 300°C (572°F ) which may deteriorate the probe.
- Do not drop the unit or subject it to sudden shock or impact, and do not disassemble the unit.
IMPORTANT: DO NOT LEAVE THE THERMOMETER IN THE OVEN WHILE COOKING. DO NOT TOUCH HOT PROBE WITH BARE HANDS.
TROUBLESHOOTING
WARRANTY
All accessories by Pit Boss® Grills, manufactured by Dansons, carry a one (1) year warranty from the date of sale by the original owner. The warranty coverage begins on the original date of purchase and proof of date of purchase, or copy of original bill of sale, is required to validate the warranty. Customers will be subject to parts, shipping, and handling fees if unable to provide proof of the purchase or after the warranty has expired. Dansons warrants that all part(s) are free of defects in material and workmanship, for the length of use and ownership of the original purchaser. This warranty will not apply nor will Dansons assume responsibility if your product has not been operated, cleaned and maintained in strict accordance with this owner’s manual.
CUSTOMER CARE
If you have any questions or problems, contact Customer Care. To order
replacement parts, please contact your local Pit Boss® Grills dealer or visit
our online store.
service@pitboss-grills.com
www.pitboss-grills.com
IMPORTANT
DO NOT RETURN TO STORE
For all questions, comments, or inquiries, please contact Dansons directly:
http://www.pitboss-grills.com www.pitboss-grills.com
© 2022 DANSONS 602220119UMV
MADE IN CHINA
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>