PIT BOSS PBV5P1 Wood Pellet Vertical Smoker User Manual
- June 3, 2024
- PIT BOSS
Table of Contents
PIT BOSS PBV5P1 Wood Pellet Vertical Smoker
WOOD PELLET VERTICAL SMOKER
IMPORTANT, READ CAREFULLY, AND RETAIN IT FOR FUTURE REFERENCE. THE MANUAL MUST BE READ BEFORE OPERATING!
MODEL: PBVSP1 10516
ASSEMBLY AND OPERATION
WARNING: Please read the entire manual before installation and use of this electric, pellet fuel-burning appliance. Failure to follow these instructions could result in property damage, bodily injury or even death. Contact local building or fire officials about restrictions and installation inspection requirements in your area.
FOR OUTDOOR AND HOUSEHOLD USE ONLY. NOT FOR COMMERCIAL USE.
VERTICAL WOOD PELLET SMOKER
| Diagram # | Item # | Description |
|---|---|---|
| 16 | PBV57P1- 25 | Auger Box Housing |
| 27 | PBV57P1- 26 | Auger Flighting Assembly 8.25″ |
| 29 | 70102 | Auger Motor |
| 30 | PBV357P1- 27 | Auger Motor Bracket (2 per unit) |
| 31 | PBV357P1- 30 | Auger Motor Housing |
| 44 | PBV5P1- 05.2 | Back Handle |
| 15 | PBV357P1- 23 | Burn Pot |
| 4 | PBV2357- 07 | Cabinet Door Handle |
| 40 | PBV- 06 | Cabinet Door Latch |
| 22 | PBVDP- 21 | Caster (locking) |
| 23 | PBVDP- 22 | Caster (without lock) |
| 48 | 31470 | Chimney Cap |
| 47 | PBV357P1- 04 | Chimney Stack |
| 33 | PBV357P1- 22 | Clean Out Door Knob |
| 19 | 70133 | Combustion Fan |
| 20 | PBV357P1- 31 | Combustion Fan Housing |
| 38 | 80124 | Control Board – trapazoid pellet – 2 meat probe |
| 41 | PBV57P1- 01 | **Cooking Grid (21.75″ x 14.25″) 1pc (5 per |
unit)
42| PBV23- 05| Cooking Grid Support Bracket 1pc (10 per
unit)
3| 20047| Door Assembly
17| 60527| Door Gasket – 122″ roll
11| PBV357P1- 14| Flame Tamer
39| PBV57P1- 07.3| Front Control Support Panel
34| PBV357P1- 19| Grease Exhaust Tube
9| PBV- 23| Grease Tray Assembly
8| PBV357P1- 17.2| Grease Tray Bracket-Left
10| PBV357P1- 17.1| Grease Tray Bracket-Right
18| 20004| Hardware Pack (note: same as PBV357P1-34 &
PBVER300020003)
32| PBV357P1- 20| Heat Shield
5| PBV357P1- 37| Hinge (body side)
1| PBV357P1- 38| Hinge (door side)
43| PBV357P1- 35| Hopper Glass – includes gasket
46| 20048| Hopper Lid (includes hinge and screws)
49| PBV357P1- 06| Hopper Lid Stopper
50| PBV57P1- 10| Hopper safety screen
28| 70112| Igniter
14| PBV57P1- 15.1| Left Front Leg
13| PBV57P1- 15.2| Left Rear Leg
2| PBVDP- 26| Logo Plate
37| 50152| Meat Probe
6| PBVADP- 24| Power Cord Holding Bracket
25| PBV57P1- 15.3| Right Front Leg
24| PBV57P1- 15.4| Right Rear Leg
45| PBV5P1- 07.2| Smoker Cabinet
35| PBV57P1- 12| Support Bracket
36| PBV57P1- 11| Support Panel – 1pc (2 per unit)
26| PBV357P1- 36| Temperature Probe
21| PBV57P1- 33| Temperature Probe Housing
12| PBV57P1- 13| Water Pan
7| PBV357P1- 18| Wire Components Housing**
UNDERSTANDING THE CONTROL BOARD
UNDERSTANDING THE PROBES
TEMPERATURE PROBE
Located inside the cabinet, on the rear wall along the bottom, is the temperature probe. It is a small, vertical piece of stainless steel. The temperature probe measures the internal temperature of the unit. When the temperature is adjusted on the Control Board, the temperature probe will read the actual temperature inside the unit and adjust to the desired temperature.
IMPORTANT: The temperature of your unit is highly affected on ambient outdoor weather, quality of pellets used, flavor of pellets, and the quantity of food being cooked.
MEAT PROBE
The meat probe measures the internal temperature of your meat in the smoke cabinet, similar to your indoor oven. Plugin the meat probe adapter to the meat probe connection port and insert the stainless steel meat probe into the thickest portion of your meat and the temperature will be displayed on the control board. To ensure the meat probe is connected properly to the connection port, feel and hear it snap into place.